New Product News USB Connectors XM7 Small Interface Connectors That Conform to USB Standards mini-USB Connectors * Insertion life of 5,000 insertions. * Right-angle DIP terminals or right-angle SMT terminals. USB Connectors * USB A-type sockets for mounting on personal computers and USB hubs. USB B-type sockets for mounting on printers, scanner, mouses, and other peripheral devices for computers. RoHS Compliant XM7D mini-USB Connectors Model Number Legend XM7D-05 1 @ 1 2 3 4 1 Type 3 Plating Specification D: mini-B-type socket 1: Gold plated 2 No. of Contacts 4 Terminal Shape 05: 5 contacts 2: Right-angle DIP terminals 4: Right-angle SMT terminals Ordering Information Sockets Right-angle DIP terminals Right-angle SMT terminals Appearance Model Minimum ordering quantity (pieces) XM7D-0512 XM7D-0514 100 50 1 XM7 Ratings and Characteristics Materials Rated current 1A Housing LCP resin Rated voltage 30 V Contacts Copper alloy Insulation resistance 100 M min. Shell Copper alloy Contact resistance 50 m max. Dielectric strength 100 VAC for 1 min (leakage current: 0.5 mA max.) Total insertion force 35 N max. Total removal force 7 N min. Insertion durability 5,000 insertions Ambient operating temperature 0 to 50C (with no icing) Dimensions (Unit: mm) XM7D-0512 7.7 6.9 5.87 PCB Mating Dimensions (BOTTOM VIEW) 3.1 3.9 4 7.40.1 0.80.05 1.8 2 0.4 0.6 3.2 0.8 1.6 0.25 1.2 1.25 4.75 1.90.05 4.750.1 0.90.05 7.3 1.20.05 0.80.05 Five, 0.7 +0.1 dia. 0 3.20.05 9.850.3 9.2 XM7D-0514 7.7 6.9 5.87 PCB Mating Dimensions (TOP VIEW) 3.1 8.80.1 20.05 3.9 2.50.05 0.9 2.50.05 5.50.1 1.5 9.250.3 5.5 0.50.05 0.80.05 0.4 0.8 1.5 2 3.20.05 XM7 XM7A/B USB Connectors Model Number Legend X M 7@ -04 4 @ -@ 1 2 3 4 5 1 Type 3 Plating Specification A: A-type socket B: B-type socket 4: Gold plated 2 No. of Contacts 1: Straight (A-type sockets only) 2: Right angle 5 Special Code A-type sockets 4 Terminal Shape 04: 4 contacts Blank: 1 socket (black housing) A: 2 stacked sockets (black housing) B-type sockets Blank: White housing Ordering Information Sockets Item One A-type Socket Type With straight DIP kinked terminals One A-type Socket With right-angle DIP kinked terminals Two Stacked A-type Sockets With right-angle DIP kinked terminals One B-type Socket With right-angle DIP kinked terminals Appearance Model Minimum ordering quantity (pieces) XM7A-0441 XM7A-0442 XM7A-0442-A XM7B-0442 120 150 120 150 Ratings and Characteristics Rated current 1A Rated voltage 30 VAC Contact resistance 30 m max. (at 20 mV, 100 mA max. (excluding cable conductor resistance)) Insulation resistance 1,000 M min. (at 500 VDC) Dielectric strength 750 VAC for 1 min (leakage current: 0.5 mA max.) Total insertion force 35.3 N max. Total removal force 10 N min. Insertion durability 1,500 insertions Ambient operating temperature -40 to 60C (with no icing) Materials and Finish Sockets Classification Item Type Fiber-glass reinforced PBT resin (UL94V-0)/black Housing Contacts Shell A-type Sockets Mating end Terminals B-type Sockets Fiber-glass reinforced PBT resin (UL94V-0)/white Phosphor bronze/nickel base, gold plating Phosphor bronze/nickel base, tin alloy plated Copper alloy/tin plated 3 XM7 Dimensions (Unit: mm) XM7A-0441 One A-type Socket (15.6) 7 2 Mounting holes (t = 1.6 mm, bottom view) 13.140.1 Contact No.1 Contact No.4 3.070.1 2.710.1 Two, 2.30.08 dia. Four, 0.920.08 dia. 14.5 12.5 Contact No.1 2.50.1 2.00.1 7.00.1 Contact No.4 2.8 (0.5) 1.40.25 7.12 5.12 2.71 5.72 15.0 XM7A-0442 One A-type Socket 14.5 Contact No. 1 Contact No. 4 12.5 14.0 7.12 5.12 6.99 4.13 (11.4) 2.84 3.72 10.28 2 7 2.71 (16.2) Mounting holes (t = 1.6 mm, bottom view) Contact No. 1 13.140.1 Contact No. 4 3.070.1 2.710.1 Two, 2.3 0.08 dia. Four, 0.92 0.08 dia. XM7A-0442-A Two Stacked A-type Sockets 2.00.1 7.00.1 2.50.1 14.5 Top contact No. 1 Top contact No. 4 12.5 0.5 16.96 5.12 13.62 8.5 15.62 15.49 (19.9) 5.12 2.84 Bottom contact No. 4 2.71 2 Bottom contact No. 1 10.28 (15.6) Mounting holes (t = 1.6 mm, bottom view) Bottom contact No. 1 13.140.1 3.070.1 Top contact No. 1 Four, 2.3 0.08 dia. Bottom contact No. 4 2.710.1 5.330.1 4 2.00.1 7.00.1 5.68 Top contact Bottom contact Eight, 0.92 0.08 dia. 5.680.1 3.72 5.33 7 Top contact No. 4 XM7 XM7B-0442 One B-type Socket Contact No. 2 12.04 8.45 5.5 Contact No. 1 16 3.1 7.78 11 10.62 (14.7) 2.91 Contact No. 3 Contact No. 4 10.28 2.71 2 Contact Contact No. 4 Contact Contact No. 1 No. 3 No. 2 2.5 (15.2) Mounting holes (t = 1.6 mm, bottom view) Contact No. 3 Contact No. 4 12.040.1 2.710.1 Two, 2.3 0.08 dia. 20.1 4.770.1 2.50.1 Four, 0.92 0.08 dia. Contact No. 2 Contact No. 1 Accessories (sold separately) (Unit: mm) Dust cover (For XM7A One A-type socket) XM7Z-0001 (A type) 1.4 16.8 7.5 12.3 2.35 10 Dust cover (For XM7B sockets) XM7Z-0002 (B type) 1.4 Characteristics/Material 14.2 Ambient operating temperature -40 to 60C Material Polyethylene resin 6.4 8 13 7.4 Model Applicable XM7Z-0001 XM7A (One A-type Socket) XM7Z-0002 XM7B Minimum ordering quantity (pieces) 50 Note: Dust covers cannot be used for Two Stacked A-type sockets. 5 XM7 Precautions Precautions for Correct Use Automatic Soldering Using an Automatic Solder Bath after Reflow Reference Information: Automated Soldering Conditions Mask the mating portion with tape before you perform automatic soldering to prevent flux or solder from entering the mating portion of the Connector. Select and use a suitable masking tape. (Jet Flow) (1) Soldering temperature: 250 5C (2) Continuous soldering time: 5 1 s max. Application Precautions Soldering Conditions * Reference Information: Reflow Conditions Maximum temperature: 260C Time: 5 to 15 s max. (C) Peak temperature 260 Soldering temperature 250 Preheating temperature 150 (s) Preheating time: 60 s max. Soldering time: 5 to 15 s max. These conditions, however, depend on the type of solder, the manufacturer, the amount of solder, the size of the board, and the other mounting materials. Screen Thickness for Printing Cream Solder We recommend a metal mask thickness of 0.15 mm when printing cream solder. The appropriate conditions, however, depend on the type of solder, the manufacturer, the amount of solder, the size of the circuit board, other mounting materials, and other conditions. Terminal Shapes The terminals will deform if they are subjected to an excessive load, which will in turn reduce solderability when mounting. Do not drop the Connectors or handle them carelessly. Do not connect anything when the Connectors are not mounted to a board. Doing so may deform the terminals. 6 * Confirm that there is no excessive misalignment or inclination in the mating contact portion between the plug and socket before mating the Connector. Make sure that the Connector is mated all the way to the back. If the Connector is not mated all the way to the back, contact reliability may be lost. * Do not apply an extreme load during Connector insertion or removal. The Connector may be damaged, and contact failure may result. Twist the plug and socket as little as possible when mating the Connector. Not doing so may deform the terminals or housing or crack the housing. * Do not insert a foreign object, such as tweezers, into the Connector mating contact portion. Doing so may cause the plating to peel off or deform the terminals. Precautions for Board Mounting Be careful of the amount of board warping. If the board is excessively warped, soldering faults may occur. Storage Do not store the Connectors in locations subject to dust or high humidity. Do not store the Connectors in locations close to sources of gasses such ammonia gas or sulfide gas. Terms and Conditions Agreement Read and understand this catalog. Please read and understand this catalog before purchasing the products. Please consult your OMRON representative if you have any questions or comments. Warranties. (a) Exclusive Warranty. Omron's exclusive warranty is that the Products will be free from defects in materials and workmanship for a period of twelve months from the date of sale by Omron (or such other period expressed in writing by Omron). Omron disclaims all other warranties, express or implied. (b) Limitations. OMRON MAKES NO WARRANTY OR REPRESENTATION, EXPRESS OR IMPLIED, ABOUT NON-INFRINGEMENT, MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OF THE PRODUCTS. BUYER ACKNOWLEDGES THAT IT ALONE HAS DETERMINED THAT THE PRODUCTS WILL SUITABLY MEET THE REQUIREMENTS OF THEIR INTENDED USE. Omron further disclaims all warranties and responsibility of any type for claims or expenses based on infringement by the Products or otherwise of any intellectual property right. (c) Buyer Remedy. Omron's sole obligation hereunder shall be, at Omron's election, to (i) replace (in the form originally shipped with Buyer responsible for labor charges for removal or replacement thereof) the non-complying Product, (ii) repair the non-complying Product, or (iii) repay or credit Buyer an amount equal to the purchase price of the non-complying Product; provided that in no event shall Omron be responsible for warranty, repair, indemnity or any other claims or expenses regarding the Products unless Omron's analysis confirms that the Products were properly handled, stored, installed and maintained and not subject to contamination, abuse, misuse or inappropriate modification. Return of any Products by Buyer must be approved in writing by Omron before shipment. Omron Companies shall not be liable for the suitability or unsuitability or the results from the use of Products in combination with any electrical or electronic components, circuits, system assemblies or any other materials or substances or environments. Any advice, recommendations or information given orally or in writing, are not to be construed as an amendment or addition to the above warranty. See http://www.omron.com/global/ or contact your Omron representative for published information. Limitation on Liability; Etc. OMRON COMPANIES SHALL NOT BE LIABLE FOR SPECIAL, INDIRECT, INCIDENTAL, OR CONSEQUENTIAL DAMAGES, LOSS OF PROFITS OR PRODUCTION OR COMMERCIAL LOSS IN ANY WAY CONNECTED WITH THE PRODUCTS, WHETHER SUCH CLAIM IS BASED IN CONTRACT, WARRANTY, NEGLIGENCE OR STRICT LIABILITY. Further, in no event shall liability of Omron Companies exceed the individual price of the Product on which liability is asserted. Suitability of Use. Omron Companies shall not be responsible for conformity with any standards, codes or regulations which apply to the combination of the Product in the Buyer's application or use of the Product. At Buyer's request, Omron will provide applicable third party certification documents identifying ratings and limitations of use which apply to the Product. This information by itself is not sufficient for a complete determination of the suitability of the Product in combination with the end product, machine, system, or other application or use. Buyer shall be solely responsible for determining appropriateness of the particular Product with respect to Buyer's application, product or system. Buyer shall take application responsibility in all cases. NEVER USE THE PRODUCT FOR AN APPLICATION INVOLVING SERIOUS RISK TO LIFE OR PROPERTY OR IN LARGE QUANTITIES WITHOUT ENSURING THAT THE SYSTEM AS A WHOLE HAS BEEN DESIGNED TO ADDRESS THE RISKS, AND THAT THE OMRON PRODUCT(S) IS PROPERLY RATED AND INSTALLED FOR THE INTENDED USE WITHIN THE OVERALL EQUIPMENT OR SYSTEM. Programmable Products. Omron Companies shall not be responsible for the user's programming of a programmable Product, or any consequence thereof. Performance Data. Data presented in Omron Company websites, catalogs and other materials is provided as a guide for the user in determining suitability and does not constitute a warranty. It may represent the result of Omron's test conditions, and the user must correlate it to actual application requirements. Actual performance is subject to the Omron's Warranty and Limitations of Liability. Change in Specifications. Product specifications and accessories may be changed at any time based on improvements and other reasons. It is our practice to change part numbers when published ratings or features are changed, or when significant construction changes are made. However, some specifications of the Product may be changed without any notice. When in doubt, special part numbers may be assigned to fix or establish key specifications for your application. Please consult with your Omron's representative at any time to confirm actual specifications of purchased Product. Errors and Omissions. Information presented by Omron Companies has been checked and is believed to be accurate; however, no responsibility is assumed for clerical, typographical or proofreading errors or omissions. 2013 G079-E1-01 0813 (0813)