TE Connectivity Micro USB Connectors Micro USB connectors Picture Mount type Soldering type STD REVERSED Flange Dimensions P/N Remarks TID A Plug N/A N/A N/A N/A 1939053-1 1939053-2 1939053-3 cable O2.8 cable O3.3 cable O4.3 N/A A Plug N/A N/A N/A N/A 1939054-1 1939054-2 1939054-3 cable O2.8 cable O3.3 cable O4.3 N/A AB TOP SMT STD With 7.5 x 5.00 x 2.51 1 9 8 1 5 8 4 -1 60001338 B TOP SMT STD With 7.5 x 5.00 x 2.51 1 9 8 1 5 6 8 -1 60001336 B TOP 2 Dip STD With 7.5 x 5.00 x 2.51 2069746-1 Type short version 61001336 B TOP 2 Dip STD With 7.5 x 5.00 x 2.51 2013499-1 61001336 B TOP 4 Dip STD With 7.5 x 5.00 x 2.51 2040002-1 62001336 AB TOP 2 Dip STD Without 7.52 x 5 x 2.51 2134536-2 TBA B TOP SMT STD Without 7.5 x 5 x 2.51 2174507-2 TBA AB TOP SMT STD Without 8.2 x 5.0 x 3.8 1 5 5 1 6 2 9 -1 Splash Proof 60001915 B TOP SMT STD Without 8.2 x 5.0 x 3.8 2173157-1 Splash Proof TBA B Mid h=1.5 4 Dip STD With 7.52 x 6.5 x 2.48 2040343-2 Frequently Asked Questions Question 1 What does TID mean? Answer 1 TID stands for Test Identification Number. In order to acquire a TID number the USB connector needs to be subjected to compliance testing performed by a USB approved independent test facility. USB IF will evaluate the test results and inform the manufacturer of the pass of fail determination. Question 2 Does TE Connectivity also produce custom cable assemblies? Answer 2 TE Connectivity is a major supplier of all sorts of cable assemblies. A cable assembly can be fully customized to the customer needs. There is even the possibility to integrate complex (active) modules into the cable. Question 3 Why is DIP soldering used? Answer 3 Due to the relatively large forces that can be applied to the micro USB interface, and the fact that all contacts are located at the back side of the connector, further hold downs toward the front of the Micro USB connector are required. TE Connectivity offers connectors which are fully SMD, featuring brackets to the front of the connector. DIP type hold downs are more rugged than SMD soldered brackets. Therefore they provide a better resistance against break off. Question 4 What does splash proof mean? Answer 4 Our splash proof series of connectors are designed to withstand a moderate amount of water sprayed on them. Even a heavy Monsoon would be not problem for this connector series. Quick Reference Guide 60001495 Micro USB Connectors The USB (Universal Serial Bus) is a standard product controlled by USB Implementers Forum. USB is characterized by B B Mid h=1.6 Mid h=1.6 B TOP 4 Dip 4 Dip 2 Dip RVS RVS RVS With Without Without 7.52 x 6.5 x 2.48 7.5 x 6.5 x 2.5 752 x 5.15 x 2.48 1554266-1 2134441-2 1932788-1 61001495 63001495 TBA FOR MORE INFOMATION TE Technical Support Center Austria: +43 (0) 1-9056-0 Baltic Regions: +44 (0) 1-382508080 Canada: +1 (800) 522-6752 China: +86 (0) 400-820-6015 France: +33 (0) 1-3420-8686 Germany: +49 (0) 6151-607-1999 Italy: +39 (0) 011-401-2111 Latin/S. America: +54 (0) 11-4733-2200 Mexico: +52 (0) 55-1106-0800 Netherlands: +31 (0) 73-6246-999 Nordic: +46 (0) 8-5072-5000 Spain/Portugal: +34 (0) 932-910-330 Switzerland: +41 (0) 71-447-0447 UK: +44 (0) 800-267666 USA: +1 (800) 522-6752 Part numbers in this brochure are RoHS Compliant*, unless marked otherwise. *as defined www.te.com/leadfree widespread market adoption and consists of several form factors to accommodate different device requirements. The Micro USB series are mostly used in mobile devices and are the smallest connector series in the USB family. TE's USB connectors combine high speed data capabilities and a charging function in one connector. TE Connectivity micro USB connectors are well known for their reliability, robustness and the sytem's versatility in meeting all USB applications. The TE USB system is a complete interconnection technology for I/O devices and has many variants available, ranging from DIP type soldering, SMT soldering, standard mount, reverse mount and mid mount. TE Connectivity's technological capability enables its micro USB connector series as very efficient cost saving solution for our customers. FEATURES BENEFITS APPLICATIONS * Reliability-optimized design, * Small size connector * Cell phones/smartphones provides a stable connection even * High design freedom * MP3 players after thousands of insertions * Increased robustness and * GPS units * Cost savings achieved by the integration of power and data transportation within one connector te.com * Our large portfolio and highly superior durability * Cost-efficient solution * Readers * Home electronic devices * Tablets * Digital cameras and camcorders customizable product provides the (c) 2012 Tyco Electronics Corporation, a TE Connectivity Ltd. Company. All Rights Reserved. 5-1773464-3 CD 1M 10/2012 TE Connectivity and TE connectivity (logo) are trademarks. Other logos, product and/or company names might be trademarks of their respective owners. best possible design flexibility While TE has made every reasonable effort to ensure the accuracy of the information in this brochure, TE does not guarantee that it is error-free, nor does TE make any other representation, warranty or guarantee that the information is accurate, correct, reliable or current. TE reserves the right to make any adjustments to the information contained herein at any time without notice. TE expressly disclaims all implied warranties regarding the information contained herein, including, but not limited to, any implied warranties of merchantability or fitness for a particular purpose. The dimensions in this catalog are for reference purposes only and are subject to change without notice. Specifications are subject to change without notice. Consult TE for the latest dimensions and design specifications. te.com/products/microusb 209-0688A.indd 1 te.com/products/microusb 12/10/23 13:49 TE Connectivity Micro USB Connectors Type A and B plugs and B and AB receptacles TE Connectivity Micro USB Connectors Flangeless Type B Micro USB Connectors Splash-Proof Type A plugs are typically used for connection to "master" Type AB TE Connectivity The offers either axial sealing or radial sealing possibilities to the phone cover. devices. Type B plugs are used for connections to "slave" Flange devices. The device itself either features a receptacle that can Flangeless accept only type B (slave) plugs or both type A and type B plugs (device can function as master or slave). This receptacle Receptacle is called an "AB" receptacle. Splash-proof sealing all around; Mating face Mating face Mating face Mating face water proof sealing can be applied as well Sealing material on the outside of the cover Cut the flange Plug All holes in the shield are closed by the housing sealing Type A Type B Soldering Type SMT Dip With Flange DIP type receptacles feature 2 or 4 through-hole solder legs With Flange that provide additional strength to the connector. The micro USB connector with flange leaves a gap between the connector and the phone cover. From an aesthetic point of view, this is less desirable. Furthermore, the gap allows for dust intrusion. They prevent the connector from being ripped off the board if an exceptionally large force is applied to the connector 4 Dip (4 legs) 2 Dip (2 legs) (for Cable Assemblies example, when the device is dropped with an inserted plug). Gap Type AB Mount Type Standard Mid Mount holding feature can be applied Dip Soldering type No dip portion Either SMD or DIP soldering for Appearance of Flangeless Micro USB in the Customer Model Gap TE Connectivity's mobile device cable assembly product line is the latest generation interconnects for mobile devices, including mobile phones and tablet computers. The products are designed to be compliant with the well-known and widely used industry standards. The product range includes al industry accepted interfaces, like micro-USB, USB-A, HDMI-D and standards like USB 2.0, USB 3.0, HDMI 1.3 and 1.4. Cosmetics, cable length, colors and configurations can be adjusted toward customers' needs. Type B Reversed Standard vs. Mid Mount A micro USB connector has a height of 2.51mm. With standard Flangeless onboard mounting, this height is a given. However, by "sinking" Flangeless The flangeless micro USB connector looks better in combination with the cover. The function of the flange is picked up by the shell. the connector into the board, the height in the end application can be reduced. This mount type is called Mid Mount. Depending on the requirements, several heights can be achieved. Reversed The micro USB plug always needs to be plugged into the devices with the USB logo facing the user. Reversed types No Gap allow for mounting on the opposite board site while the plug insertion direction is still correct. This is achieved by flipping Type AB No Gap Type B the mating interface. Reversed mounting is available in both standard reversed (on board) and reversed mid mount types. te.com/products/microusb 209-0688A.indd 2 te.com/products/microusb te.com/products/microusb 12/10/23 13:49 TE Connectivity Micro USB Connectors Type A and B plugs and B and AB receptacles TE Connectivity Micro USB Connectors Flangeless Type B Micro USB Connectors Splash-Proof Type A plugs are typically used for connection to "master" Type AB TE Connectivity The offers either axial sealing or radial sealing possibilities to the phone cover. devices. Type B plugs are used for connections to "slave" Flange devices. The device itself either features a receptacle that can Flangeless accept only type B (slave) plugs or both type A and type B plugs (device can function as master or slave). This receptacle Receptacle is called an "AB" receptacle. Splash-proof sealing all around; Mating face Mating face Mating face Mating face water proof sealing can be applied as well Sealing material on the outside of the cover Cut the flange Plug All holes in the shield are closed by the housing sealing Type A Type B Soldering Type SMT Dip With Flange DIP type receptacles feature 2 or 4 through-hole solder legs With Flange that provide additional strength to the connector. The micro USB connector with flange leaves a gap between the connector and the phone cover. From an aesthetic point of view, this is less desirable. Furthermore, the gap allows for dust intrusion. They prevent the connector from being ripped off the board if an exceptionally large force is applied to the connector 4 Dip (4 legs) 2 Dip (2 legs) (for Cable Assemblies example, when the device is dropped with an inserted plug). Gap Type AB Mount Type Standard Mid Mount holding feature can be applied Dip Soldering type No dip portion Either SMD or DIP soldering for Appearance of Flangeless Micro USB in the Customer Model Gap TE Connectivity's mobile device cable assembly product line is the latest generation interconnects for mobile devices, including mobile phones and tablet computers. The products are designed to be compliant with the well-known and widely used industry standards. The product range includes al industry accepted interfaces, like micro-USB, USB-A, HDMI-D and standards like USB 2.0, USB 3.0, HDMI 1.3 and 1.4. Cosmetics, cable length, colors and configurations can be adjusted toward customers' needs. Type B Reversed Standard vs. Mid Mount A micro USB connector has a height of 2.51mm. With standard Flangeless onboard mounting, this height is a given. However, by "sinking" Flangeless The flangeless micro USB connector looks better in combination with the cover. The function of the flange is picked up by the shell. the connector into the board, the height in the end application can be reduced. This mount type is called Mid Mount. Depending on the requirements, several heights can be achieved. Reversed The micro USB plug always needs to be plugged into the devices with the USB logo facing the user. Reversed types No Gap allow for mounting on the opposite board site while the plug insertion direction is still correct. This is achieved by flipping Type AB No Gap Type B the mating interface. Reversed mounting is available in both standard reversed (on board) and reversed mid mount types. te.com/products/microusb 209-0688A.indd 2 te.com/products/microusb te.com/products/microusb 12/10/23 13:49 TE Connectivity Micro USB Connectors Type A and B plugs and B and AB receptacles TE Connectivity Micro USB Connectors Flangeless Type B Micro USB Connectors Splash-Proof Type A plugs are typically used for connection to "master" Type AB TE Connectivity The offers either axial sealing or radial sealing possibilities to the phone cover. devices. Type B plugs are used for connections to "slave" Flange devices. The device itself either features a receptacle that can Flangeless accept only type B (slave) plugs or both type A and type B plugs (device can function as master or slave). This receptacle Receptacle is called an "AB" receptacle. Splash-proof sealing all around; Mating face Mating face Mating face Mating face water proof sealing can be applied as well Sealing material on the outside of the cover Cut the flange Plug All holes in the shield are closed by the housing sealing Type A Type B Soldering Type SMT Dip With Flange DIP type receptacles feature 2 or 4 through-hole solder legs With Flange that provide additional strength to the connector. The micro USB connector with flange leaves a gap between the connector and the phone cover. From an aesthetic point of view, this is less desirable. Furthermore, the gap allows for dust intrusion. They prevent the connector from being ripped off the board if an exceptionally large force is applied to the connector 4 Dip (4 legs) 2 Dip (2 legs) (for Cable Assemblies example, when the device is dropped with an inserted plug). Gap Type AB Mount Type Standard Mid Mount holding feature can be applied Dip Soldering type No dip portion Either SMD or DIP soldering for Appearance of Flangeless Micro USB in the Customer Model Gap TE Connectivity's mobile device cable assembly product line is the latest generation interconnects for mobile devices, including mobile phones and tablet computers. The products are designed to be compliant with the well-known and widely used industry standards. The product range includes al industry accepted interfaces, like micro-USB, USB-A, HDMI-D and standards like USB 2.0, USB 3.0, HDMI 1.3 and 1.4. Cosmetics, cable length, colors and configurations can be adjusted toward customers' needs. Type B Reversed Standard vs. Mid Mount A micro USB connector has a height of 2.51mm. With standard Flangeless onboard mounting, this height is a given. However, by "sinking" Flangeless The flangeless micro USB connector looks better in combination with the cover. The function of the flange is picked up by the shell. the connector into the board, the height in the end application can be reduced. This mount type is called Mid Mount. Depending on the requirements, several heights can be achieved. Reversed The micro USB plug always needs to be plugged into the devices with the USB logo facing the user. Reversed types No Gap allow for mounting on the opposite board site while the plug insertion direction is still correct. This is achieved by flipping Type AB No Gap Type B the mating interface. Reversed mounting is available in both standard reversed (on board) and reversed mid mount types. te.com/products/microusb 209-0688A.indd 2 te.com/products/microusb te.com/products/microusb 12/10/23 13:49 TE Connectivity Micro USB Connectors Micro USB connectors Picture Mount type Soldering type STD REVERSED Flange Dimensions P/N Remarks TID A Plug N/A N/A N/A N/A 1939053-1 1939053-2 1939053-3 cable O2.8 cable O3.3 cable O4.3 N/A A Plug N/A N/A N/A N/A 1939054-1 1939054-2 1939054-3 cable O2.8 cable O3.3 cable O4.3 N/A AB TOP SMT STD With 7.5 x 5.00 x 2.51 1 9 8 1 5 8 4 -1 60001338 B TOP SMT STD With 7.5 x 5.00 x 2.51 1 9 8 1 5 6 8 -1 60001336 B TOP 2 Dip STD With 7.5 x 5.00 x 2.51 2069746-1 Type short version 61001336 B TOP 2 Dip STD With 7.5 x 5.00 x 2.51 2013499-1 61001336 B TOP 4 Dip STD With 7.5 x 5.00 x 2.51 2040002-1 62001336 AB TOP 2 Dip STD Without 7.52 x 5 x 2.51 2134536-2 TBA B TOP SMT STD Without 7.5 x 5 x 2.51 2174507-2 TBA AB TOP SMT STD Without 8.2 x 5.0 x 3.8 1 5 5 1 6 2 9 -1 Splash Proof 60001915 B TOP SMT STD Without 8.2 x 5.0 x 3.8 2173157-1 Splash Proof TBA B Mid h=1.5 4 Dip STD With 7.52 x 6.5 x 2.48 2040343-2 Frequently Asked Questions Question 1 What does TID mean? Answer 1 TID stands for Test Identification Number. In order to acquire a TID number the USB connector needs to be subjected to compliance testing performed by a USB approved independent test facility. USB IF will evaluate the test results and inform the manufacturer of the pass of fail determination. Question 2 Does TE Connectivity also produce custom cable assemblies? Answer 2 TE Connectivity is a major supplier of all sorts of cable assemblies. A cable assembly can be fully customized to the customer needs. There is even the possibility to integrate complex (active) modules into the cable. Question 3 Why is DIP soldering used? Answer 3 Due to the relatively large forces that can be applied to the micro USB interface, and the fact that all contacts are located at the back side of the connector, further hold downs toward the front of the Micro USB connector are required. TE Connectivity offers connectors which are fully SMD, featuring brackets to the front of the connector. DIP type hold downs are more rugged than SMD soldered brackets. Therefore they provide a better resistance against break off. Question 4 What does splash proof mean? Answer 4 Our splash proof series of connectors are designed to withstand a moderate amount of water sprayed on them. Even a heavy Monsoon would be not problem for this connector series. Quick Reference Guide 60001495 Micro USB Connectors The USB (Universal Serial Bus) is a standard product controlled by USB Implementers Forum. USB is characterized by B B Mid h=1.6 Mid h=1.6 B TOP 4 Dip 4 Dip 2 Dip RVS RVS RVS With Without Without 7.52 x 6.5 x 2.48 7.5 x 6.5 x 2.5 752 x 5.15 x 2.48 1554266-1 2134441-2 1932788-1 61001495 63001495 TBA FOR MORE INFOMATION TE Technical Support Center Austria: +43 (0) 1-9056-0 Baltic Regions: +44 (0) 1-382508080 Canada: +1 (800) 522-6752 China: +86 (0) 400-820-6015 France: +33 (0) 1-3420-8686 Germany: +49 (0) 6151-607-1999 Italy: +39 (0) 011-401-2111 Latin/S. America: +54 (0) 11-4733-2200 Mexico: +52 (0) 55-1106-0800 Netherlands: +31 (0) 73-6246-999 Nordic: +46 (0) 8-5072-5000 Spain/Portugal: +34 (0) 932-910-330 Switzerland: +41 (0) 71-447-0447 UK: +44 (0) 800-267666 USA: +1 (800) 522-6752 Part numbers in this brochure are RoHS Compliant*, unless marked otherwise. *as defined www.te.com/leadfree widespread market adoption and consists of several form factors to accommodate different device requirements. The Micro USB series are mostly used in mobile devices and are the smallest connector series in the USB family. TE's USB connectors combine high speed data capabilities and a charging function in one connector. TE Connectivity micro USB connectors are well known for their reliability, robustness and the sytem's versatility in meeting all USB applications. The TE USB system is a complete interconnection technology for I/O devices and has many variants available, ranging from DIP type soldering, SMT soldering, standard mount, reverse mount and mid mount. TE Connectivity's technological capability enables its micro USB connector series as very efficient cost saving solution for our customers. FEATURES BENEFITS APPLICATIONS * Reliability-optimized design, * Small size connector * Cell phones/smartphones provides a stable connection even * High design freedom * MP3 players after thousands of insertions * Increased robustness and * GPS units * Cost savings achieved by the integration of power and data transportation within one connector te.com * Our large portfolio and highly superior durability * Cost-efficient solution * Readers * Home electronic devices * Tablets * Digital cameras and camcorders customizable product provides the (c) 2012 Tyco Electronics Corporation, a TE Connectivity Ltd. Company. All Rights Reserved. 5-1773464-3 CD 1M 10/2012 TE Connectivity and TE connectivity (logo) are trademarks. Other logos, product and/or company names might be trademarks of their respective owners. best possible design flexibility While TE has made every reasonable effort to ensure the accuracy of the information in this brochure, TE does not guarantee that it is error-free, nor does TE make any other representation, warranty or guarantee that the information is accurate, correct, reliable or current. TE reserves the right to make any adjustments to the information contained herein at any time without notice. TE expressly disclaims all implied warranties regarding the information contained herein, including, but not limited to, any implied warranties of merchantability or fitness for a particular purpose. The dimensions in this catalog are for reference purposes only and are subject to change without notice. Specifications are subject to change without notice. Consult TE for the latest dimensions and design specifications. te.com/products/microusb 209-0688A.indd 1 te.com/products/microusb 12/10/23 13:49 TE Connectivity Micro USB Connectors Micro USB connectors Picture Mount type Soldering type STD REVERSED Flange Dimensions P/N Remarks TID A Plug N/A N/A N/A N/A 1939053-1 1939053-2 1939053-3 cable O2.8 cable O3.3 cable O4.3 N/A A Plug N/A N/A N/A N/A 1939054-1 1939054-2 1939054-3 cable O2.8 cable O3.3 cable O4.3 N/A AB TOP SMT STD With 7.5 x 5.00 x 2.51 1 9 8 1 5 8 4 -1 60001338 B TOP SMT STD With 7.5 x 5.00 x 2.51 1 9 8 1 5 6 8 -1 60001336 B TOP 2 Dip STD With 7.5 x 5.00 x 2.51 2069746-1 Type short version 61001336 B TOP 2 Dip STD With 7.5 x 5.00 x 2.51 2013499-1 61001336 B TOP 4 Dip STD With 7.5 x 5.00 x 2.51 2040002-1 62001336 AB TOP 2 Dip STD Without 7.52 x 5 x 2.51 2134536-2 TBA B TOP SMT STD Without 7.5 x 5 x 2.51 2174507-2 TBA AB TOP SMT STD Without 8.2 x 5.0 x 3.8 1 5 5 1 6 2 9 -1 Splash Proof 60001915 B TOP SMT STD Without 8.2 x 5.0 x 3.8 2173157-1 Splash Proof TBA B Mid h=1.5 4 Dip STD With 7.52 x 6.5 x 2.48 2040343-2 Frequently Asked Questions Question 1 What does TID mean? Answer 1 TID stands for Test Identification Number. In order to acquire a TID number the USB connector needs to be subjected to compliance testing performed by a USB approved independent test facility. USB IF will evaluate the test results and inform the manufacturer of the pass of fail determination. Question 2 Does TE Connectivity also produce custom cable assemblies? Answer 2 TE Connectivity is a major supplier of all sorts of cable assemblies. A cable assembly can be fully customized to the customer needs. There is even the possibility to integrate complex (active) modules into the cable. Question 3 Why is DIP soldering used? Answer 3 Due to the relatively large forces that can be applied to the micro USB interface, and the fact that all contacts are located at the back side of the connector, further hold downs toward the front of the Micro USB connector are required. TE Connectivity offers connectors which are fully SMD, featuring brackets to the front of the connector. DIP type hold downs are more rugged than SMD soldered brackets. Therefore they provide a better resistance against break off. Question 4 What does splash proof mean? Answer 4 Our splash proof series of connectors are designed to withstand a moderate amount of water sprayed on them. Even a heavy Monsoon would be not problem for this connector series. Quick Reference Guide 60001495 Micro USB Connectors The USB (Universal Serial Bus) is a standard product controlled by USB Implementers Forum. USB is characterized by B B Mid h=1.6 Mid h=1.6 B TOP 4 Dip 4 Dip 2 Dip RVS RVS RVS With Without Without 7.52 x 6.5 x 2.48 7.5 x 6.5 x 2.5 752 x 5.15 x 2.48 1554266-1 2134441-2 1932788-1 61001495 63001495 TBA FOR MORE INFOMATION TE Technical Support Center Austria: +43 (0) 1-9056-0 Baltic Regions: +44 (0) 1-382508080 Canada: +1 (800) 522-6752 China: +86 (0) 400-820-6015 France: +33 (0) 1-3420-8686 Germany: +49 (0) 6151-607-1999 Italy: +39 (0) 011-401-2111 Latin/S. America: +54 (0) 11-4733-2200 Mexico: +52 (0) 55-1106-0800 Netherlands: +31 (0) 73-6246-999 Nordic: +46 (0) 8-5072-5000 Spain/Portugal: +34 (0) 932-910-330 Switzerland: +41 (0) 71-447-0447 UK: +44 (0) 800-267666 USA: +1 (800) 522-6752 Part numbers in this brochure are RoHS Compliant*, unless marked otherwise. *as defined www.te.com/leadfree widespread market adoption and consists of several form factors to accommodate different device requirements. The Micro USB series are mostly used in mobile devices and are the smallest connector series in the USB family. TE's USB connectors combine high speed data capabilities and a charging function in one connector. TE Connectivity micro USB connectors are well known for their reliability, robustness and the sytem's versatility in meeting all USB applications. The TE USB system is a complete interconnection technology for I/O devices and has many variants available, ranging from DIP type soldering, SMT soldering, standard mount, reverse mount and mid mount. TE Connectivity's technological capability enables its micro USB connector series as very efficient cost saving solution for our customers. FEATURES BENEFITS APPLICATIONS * Reliability-optimized design, * Small size connector * Cell phones/smartphones provides a stable connection even * High design freedom * MP3 players after thousands of insertions * Increased robustness and * GPS units * Cost savings achieved by the integration of power and data transportation within one connector te.com * Our large portfolio and highly superior durability * Cost-efficient solution * Readers * Home electronic devices * Tablets * Digital cameras and camcorders customizable product provides the (c) 2012 Tyco Electronics Corporation, a TE Connectivity Ltd. Company. All Rights Reserved. 5-1773464-3 CD 1M 10/2012 TE Connectivity and TE connectivity (logo) are trademarks. Other logos, product and/or company names might be trademarks of their respective owners. best possible design flexibility While TE has made every reasonable effort to ensure the accuracy of the information in this brochure, TE does not guarantee that it is error-free, nor does TE make any other representation, warranty or guarantee that the information is accurate, correct, reliable or current. TE reserves the right to make any adjustments to the information contained herein at any time without notice. TE expressly disclaims all implied warranties regarding the information contained herein, including, but not limited to, any implied warranties of merchantability or fitness for a particular purpose. The dimensions in this catalog are for reference purposes only and are subject to change without notice. Specifications are subject to change without notice. Consult TE for the latest dimensions and design specifications. te.com/products/microusb 209-0688A.indd 1 te.com/products/microusb 12/10/23 13:49