RVS RVS VERTICAL TYPE ELECTROLYTIC VERTICALCHIP CHIP TYPEALUMINUM ALUMINUM ELECTROLYTICCAPACITORS CAPACITORS GREEN CAP Chip Type 105C Standard Capacitors Compatible with surface mounting. Supplied with carrier taping. Guarantees 1000 hours at 105 C. SMD 105C 1000hours (R) (R) Anticleaning solvent RVS High temperature RV2 Marking color : Black print Specifications Item Performance 55 to 105 20 Less than 0.01CV or 3 whichever is larger (after 2 minutes) C : Rated capacitance (F) ; V : Rated voltage (V) Category temperature range () Tolerance at rated capacitance (%) Leakage current (A) Rated voltage (V) tan (max.) Tangent of loss angle (tan) 6.3 0.30 10 0.26 16 0.22 25 0.16 (20,120Hz) (20) 35 0.13 50 0.12 (20,120Hz) Rated voltage (V) 25/20 40/20 CHIP ALUMINUM Characteristics at high and low temperature Impedance ratio (max.) 6.3 4 8 10 3 5 16 2 4 25 2 3 35 2 3 50 2 3 (120Hz) 1000 hours The initial specified value or less Within 20% of initial value 200% or less of the initial specified value Test time Leakage current Percentage of capacitance change Tangent of the loss angle Endurance (105) (Applied ripple current) Shelf life (105) Test time : 1000 hours; other items are the same as those for the endurance. Voltage application treatment : According to JIS C5101-1 Applicable standards JIS C5101-1 1998, -18 1999 (IEC 60384-1 1992, -18 1993) Outline Drawing Unit : mm Frequency (Hz) Rated voltage (V) (C) (P) B0.2 D0.5 ( ) : Reference size 4 6.3 6.3 8 8 10 10 L A B C 5.30.2 5.30.2 5.30.2 7.70.3 6.50.3 100.5 100.5 10.50.5 4.3 5.3 6.6 6.6 8.4 8.4 10.4 10.4 4.3 5.3 6.6 6.6 8.4 8.4 10.4 10.4 2.0 2.3 2.7 2.7 3.4 3.0 3.3 3.3 W 0.5 0.5 0.5 0.5 0.5 0.7 0.7 0.7 to to to to to to to to 0.8 0.8 0.8 0.8 0.8 1.1 1.1 1.1 P Casing symbol 1.0 1.5 2.0 2.0 2.3 3.1 4.7 4.7 D55 E55 F55 F80 G68 G10 H10 HA5 5060 120 1k 10k100k 0.80 0.80 0.80 1 1 1 1.15 1.25 1.35 1.25 1.40 1.50 Part numbering system (example : 16V47F) RVS W L D 6.3 to 16 25 to 35 50 (C) A0.2 0.40.2 0.3MAX Coefficient of Frequency for Rated Ripple Current Series code 16 Rated voltage symbol V 470 M Rated capacitance Capacitance symbol tolerance symbol F55 Casing symbol U Taping symbol Soldering conditions are described on page 13. Land pattern size are described on page 11. The taping specifications are described on page 14. CAT.No.2015/2016E 58 NOTE : Design, Specifications are subject to change without notice. It is recommended that you shall obtain technical specifications from ELNA to ensure that the component is suitable for your use. VERTICAL CHIP TYPE ALUMINUM ELECTROLYTIC CAPACITORS (R) Standard Ratings 6.3 Rated voltage (V) Item Rated capacitance (F) Case ESR 10 Rated ripple current Case () 16 Rated ripple current Case (mArms) DxL(mm) ESR () 25 Rated ripple current Case Case Case Rated ripple current () (mArms) -- -- -- -- -- -- -- -- -- -- -- -- -- 4x5.3 905 3 0.33 -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 4x5.3 603 4 0.47 -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 4x5.3 424 5 1 -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 4x5.3 199 7 2.2 -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 4x5.3 91 10 3.3 -- -- -- -- -- -- -- -- -- -- -- -- -- 4x5.3 60 12 4.7 -- -- -- -- -- -- -- -- -- 4x5.3 57 12 4x5.3 46 14 5x5.3 42 17 -- -- -- 4x5.3 43 15 16 5x5.3 27 21 5x5.3 22 23 6.3x5.3 20 26 12 36 6.3x5.3 10 50 22 4x5.3 23 21 5x5.3 20 25 5x5.3 17 28 6.3x5.3 33 5x5.3 15 30 5x5.3 13 31 6.3x5.3 11 40 6.3x5.3 8.0 44 47 5x5.3 11 36 6.3x5.3 9.2 43 6.3x5.3 7.8 47 8x6.5 5.6 66 100 6.3x5.3 61 6.3x5.3 4.3 60 6.3x5.3 3.6 60 6.3x7.7 2.7 91 6.3x7.7 150 -- 5.0 8x6.5 -- (mArms) DxL(mm) ESR -- -- () 50 Rated ripple current () 36 (mArms) DxL(mm) ESR -- -- () 35 Rated ripple current DxL(mm) 4x5.3 (mArms) DxL(mm) ESR 0.22 10 (mArms) DxL(mm) ESR RVS 8x6.5 9.0 51 6.5 59 6.3x7.7 6.0 60 -- -- 6.3x7.7 4.2 63 2.2 84 8x10 2.0 140 180 -- -- -- -- 6.3x7.7 2.4 105 8x10 1.8 140 8x10 1.4 155 10x10 1.3 102 6.3x7.7 2.0 105 6.3x7.7 1.7 105 8x10 1.2 155 8x10 0.98 190 10x10.5 0.91 220 6.3x7.7 1.5 105 8x10 1.3 195 8x10 1.1 195 8x10 0.80 190 10x10.5 0.65 300 -- -- -- 8x10 1.1 210 8x10 0.92 210 8x10 0.78 230 10x10 0.57 300 -- -- -- -- -- -- 680 8x10 0.73 210 10x10 0.63 310 10x10 0.54 310 -- -- -- -- -- -- -- -- -- 1000 8x10 0.50 210 10x10 0.43 310 -- -- -- -- -- -- -- -- -- -- -- -- 1500 10x10 0.33 310 -- -- -- -- -- -- -- -- -- -- -- -- -- -- 8x6.5 330 470 -- (Note) Rated ripple current : 105 , 120Hz ; ESR : 20 , 120Hz NOTE : Design, Specifications are subject to change without notice. It is recommended that you shall obtain technical specifications from ELNA to ensure that the component is suitable for your use. 59 CAT.No.2015/2016E CHIP ALUMINUM -- 2.3 220