Supertex inc.
Supertex inc. ● 1235 Bordeaux Drive, Sunnyvale, CA 94089 ● Tel: 408-222-8888 ● www.supertex.com
VP2206
P-Channel Enhancement-Mode
Vertical DMOS FET
Absolute Maximum Ratings
Parameter Value
Drain-to-source voltage BVDSS
Drain-to-gate voltage BVDGS
Gate-to-source voltage ±20V
Operating and storage temperature -55OC to +150OC
Soldering temperature* 300OC
Absolute Maximum Ratings are those values beyond which damage to the device
may occur. Functional operation under these conditions is not implied. Continuous
operation of the device at the absolute rating level may affect device reliability. All
voltages are referenced to device ground.
* Distance of 1.6mm from case for 10 seconds.
Ordering Information
Device Package Options BVDSS/BVDGS
(V)
RDS(ON)
(max)
(Ω)
ID(ON)
(min)
(A)
TO-39 TO-92
VP2206 VP2206N2†VP2206N3-G -60 0.9 -4.0
Pin Configuration
TO-92 (N3)
Product Marking
TO-39 (N2)
YY = Year Sealed
WW = Week Sealed
VP
2206N2
YYWW
Features
Free from secondary breakdown
Low power drive requirement
Ease of paralleling
Low CISS and fast switching speeds
High input impedance and high gain
Excellent thermal stability
Integral source-to-drain diode
Applications
Motor controls
Converters
Amplifiers
Switches
Power supply circuits
Drivers (relays, hammers, solenoids, lamps,
memories, displays, bipolar transistors, etc.)
►
►
►
►
►
►
►
►
►
►
►
►
►
General Description
The Supertex VP2206 is an enhancement-mode (normally-
off) transistor that utilizes a vertical DMOS structure
and Supertex’s well-proven silicon-gate manufacturing
process. This combination produces a device with the
power handling capabilities of bipolar transistors, and the
high input impedance and positive temperature coefficient
inherent in MOS devices. Characteristic of all MOS
structures, this device is free from thermal runaway and
thermally-induced secondary breakdown.
Supertex’s vertical DMOS FETs are ideally suited to a
wide range of switching and amplifying applications where
very low threshold voltage, high breakdown voltage, high
input impedance, low input capacitance, and fast switching
speeds are desired.
GATE
SOURCE
DRAIN
TO-39 (N2)
GATE
SOURCE
DRAIN
TO-92 (N3)
YY = Year Sealed
WW = Week Sealed
= “Green” Packaging
SiVP
2206
Y Y W W
Package may or may not include the following marks: Si or
Package may or may not include the following marks: Si or
-G indicates package is RoHS compliant (‘Green’)
† package is RoHS compliant (‘Green’)
2
VP2206
Supertex inc. ● 1235 Bordeaux Drive, Sunnyvale, CA 94089 ● Tel: 408-222-8888 ● www.supertex.com
Electrical Characteristics (TA = 25OC unless otherwise specified)
Sym Parameter Min Typ Max Units Conditions
BVDSS Drain-to-source breakdown voltage -60 - - V VGS = 0V, ID = -10mA
VGS(th) Gate threshold voltage -1.0 - -3.5 V VGS = VDS, ID= -10mA
ΔVGS(th) Change in VGS(th) with temperature - -4.3 -5.5 mV/OC VGS = VDS, ID= -10mA
IGSS Gate body leakage - -1.0 -100 nA VGS = ± 20V, VDS = 0V
IDSS Zero gate voltage drain current
- - -50 µA VGS = 0V, VDS = Max Rating
- - -10 mA VDS = 0.8 Max Rating,
VGS = 0V, TA = 125°C
ID(ON) On-state drain current -0.85 -2.0 - VGS = -5.0V, VDS = -25V
-4.0 -9.0 - A VGS = -10V, VDS = -25V
RDS(ON) Static drain-to-source on-state resistance - 1.3 1.5 ΩVGS = -5.0V, ID = -1.0A
- 0.75 0.9 VGS = -10V, ID = -3.5A
ΔRDS(ON) Change in RDS(ON) with temperature - 0.85 1.2 %/OC VGS = -10V, ID = -3.5A
GFS Forward transductance 800 1400 - mmho VDS = -25V, ID = -2.0A
CISS Input capacitance - 325 450
pF
VGS = 0V,
VDS = -25V,
f = 1.0MHz
COSS Common source output capacitance - 125 180
CRSS Reverse transfer capacitance - 30 40
td(ON) Turn-on delay time - 4.0 15
ns
VDD = -25V,
ID = -4.0A,
RGEN = 10Ω
trRise time - 16 25
td(OFF) Turn-off delay time - 16 50
tfFall time - 22 50
VSD Diode forward voltage drop - -1.1 -1.6 V VGS = 0V, ISD = -3.5A
trr Reverse recovery time - 500 - ns VGS = 0V, ISD = -1.0A
Notes:
All D.C. parameters 100% tested at 25OC unless otherwise stated. (Pulse test: 300µs pulse, 2% duty cycle.)
All A.C. parameters sample tested.
1.
2.
Notes:
† ID (continuous) is limited by max rated TJ .
Thermal Characteristics
Package
ID
(continuous)†
(A)
ID
(pulsed)
(A)
Power Dissipation
@TC = 25OC
(W)
θJC
(OC/W)
θJA
(OC/W)
IDR
†
(A)
IDRM
(A)
TO-39 -0.75 -8.0 6.0 20.8 125 -0.75 -8.0
TO-92 -0.64 -4.0 1.0 125 170 -0.64 -4.0
Switching Waveforms and Test Circuit
90%
10%
90% 90%
10%
10%
Pulse
Generator
VDD
RL
Output
D.U.T
.
t(ON)
td(ON)
t(OFF)
td(OFF) tf
trINPUT
INPUT
OUTPUT
0V
VDD
RGEN
0V
-10V
3
VP2206
Supertex inc. ● 1235 Bordeaux Drive, Sunnyvale, CA 94089 ● Tel: 408-222-8888 ● www.supertex.com
Typical Performance Curves
Output Characteristics
-10
-8
-6
-4
-2
-0
Saturation Characteristics
-10
-8
-6
-4
-2
-0
Maximum Rated Safe Operating Area
-1 -1000-100-10
-0.1
-1.0
-10
-0.01
Thermal Response Characteristics
Thermal Resistance (normalized)
1.0
0.8
0.6
0.4
0.2
0
0.001 100.01 0.1 1
Transconductance vs. Drain Current
2
1
00 -10-5
Power Dissipation vs. Case Temperature
0 15010050
10
8
6
4
2
01257525
TO-39
PD = 6.0W
TC = 25OC
TO-92
TO-39
TO-39 (DC)
TO-92 (DC)
TO-39 (pulsed)
0 -10 -20 -30 -50-40
-3V
0 -2 -4 -6 -10-8
-6V
TO-92 (pulsed)
-4V
-3V
-8V
-6V
-4V
TC = 25°C
VDS (volts)
ID (amperes)
VDS (volts)
V
GS
= -10V V
GS
= -10V
GFS (siemens)
ID (amperes) TC (OC)
PD (watts)
VDS = -25V
VDS (volts)
ID (amperes)
tP (seconds)
ID (amperes)
T
A
= 125
O
C
-8V
T
A
= 25
O
C
T
A
= -55
O
C
TO-92
PD = 1.0W
TC = 25OC
4
VP2206
Supertex inc. ● 1235 Bordeaux Drive, Sunnyvale, CA 94089 ● Tel: 408-222-8888 ● www.supertex.com
Typical Performance Curves (cont.)
Gate Drive Dynamic Characteristics
VGS(th) (normalized)
On-Resistance vs. Drain Current
Transfer Characteristics
Capacitance vs. Drain-to-Source Voltage
400
C (picofarads)
0 -10 -20 -30 -40
300
200
0
0 -2 -4 -6 -8 -10
-10
-8
-6
-4
-2
0
-50 0 50 100 150
1.1
1.0
5
2
1.2
1.1
1.0
0.9
0.8
0.7
-10
-8
-6
-4
-2
0 2 468 10
-50 0 50 100 150
310 pF
0 -2 -4 -6 -10-8
0
3
4
f = 1.0MHz
0.9
725 pF
2.0
1.6
1.2
0.8
0.4
0
V(th) @ -1.0mA
RDS(ON) @ -10V, -3.5A
25OC
100
0
1
VGS = -5.0V
RDS(ON) (ohms)
BVDSS (normalized)
Tj (OC) ID (amperes)
BVDSS Variation with Temperature
VDS = -25V
V(th) and RDS Variation with Temperature
VGS (volts)
RDS(ON) (normalized)
TA = -55OC
QG (nanocoulombs)
VGS (volts)
VDS (volts)
CISS
COSS
CRSS
VDS = -40V
VDS = -10V
Tj (OC)
ID (amperes)
V
GS
= -10V
125OC
5
VP2206
Supertex inc. ● 1235 Bordeaux Drive, Sunnyvale, CA 94089 ● Tel: 408-222-8888 ● www.supertex.com
3-Lead TO-39 Package Outline (N2)
1
2
3
Side View
Bottom View
ΦD1
ΦD
A
h
L
Φb
jk
Φa
123
β
α
Seating
Plane
β
Symbol α β A ΦaΦbΦDΦD1 h j k L
Dimension
(inches)
MIN
45O
NOM
90O
NOM
.240 .190 .016 .350 .315 .009 .028 .029 .500
NOM - - - - - - - - -
MAX .260 .210 .021 .370 .335 .125 .034 .040 .560*
JEDEC Registration TO-39.
* This dimension is not specified in the JEDEC drawing.
Drawings not to scale.
Supertex Doc. #: DSPD-3TO39N2, Version B052009.
Supertex inc. does not recommend the use of its products in life support applications, and will not knowingly sell them for use in such applications unless it receives
an adequate “product liability indemnification insurance agreement.” Supertex inc. does not assume responsibility for use of devices described, and limits its liability
to the replacement of the devices determined defective due to workmanship. No responsibility is assumed for possible omissions and inaccuracies. Circuitry and
specifications are subject to change without notice. For the latest product specifications refer to the Supertex inc. (website: http//www.supertex.com)
©2010 Supertex inc. All rights reserved. Unauthorized use or reproduction is prohibited. Supertex inc.
1235 Bordeaux Drive, Sunnyvale, CA 94089
Tel: 408-222-8888
www.supertex.com
6
VP2206
(The package drawing(s) in this data sheet may not reflect the most current specifications. For the latest package outline
information go to http://www.supertex.com/packaging.html.)
Doc.# DSFP-VP2206
C032610
3-Lead TO-92 Package Outline (N3)
Symbol A b c D E E1 e e1 L
Dimensions
(inches)
MIN .170 .014†.014†.175 .125 .080 .095 .045 .500
NOM - - - - - - - - -
MAX .210 .022†.022†.205 .165 .105 .105 .055 .610*
JEDEC Registration TO-92.
* This dimension is not specified in the JEDEC drawing.
† This dimension differs from the JEDEC drawing.
Drawings not to scale.
Supertex Doc.#: DSPD-3TO92N3, Version E041009.
Seating
Plane
1
2
3
Front View Side View
Bottom View
E1 E
D
e1
L
e
c
1 2 3
b
A
