PRODUCT DATASHEET Gt3 series last update 10/11/2014 Product number C10891_GT3-S Family Type LED Color Diameter Height Style Optic Material Holder Material Fastening Status Gt3 Lens array XB-D Clear 35 mm 9 mm Round PMMA ["glue", "pin"] Production ready Product number C10892_GT3-M Family Type LED Color Diameter Height Style Optic Material Holder Material Fastening Status Gt3 Lens array XB-D Clear 35 mm 9 mm Round PMMA ["pin", "glue"] Production ready Product number C10893_GT3-W Family Type LED Color Diameter Height Style Optic Material Holder Material Fastening Status Gt3 Lens array XB-D Clear 35 mm 9 mm Round PMMA ["glue", "pin"] Production ready Product number C11624_GT3-WW Family Type LED Color Diameter Height Style Optic Material Holder Material Fastening Status Gt3 Lens array XB-D Clear 35 mm 9 mm Round PMMA ["pin", "glue"] Production ready FWHM Efficiency cd/lm Gerber File 14 degrees 92 % 4.300 Available FWHM Efficiency cd/lm Gerber File 25 degrees 91 % 2.000 Available FWHM Efficiency cd/lm Gerber File 32 degrees 92 % 1.800 Available FWHM Efficiency cd/lm Gerber File 38 degrees 92 % 1.400 Available April 9th 2018 13:05 Copyright Ledil Oy - Subject to change without prior notice - Page 1/3 Ledil Oy Salorankatu 10 24240 SALO Finland http://www.ledil.com email: ledil@ledil.com FAX: +358-2-733 8001 PRODUCT DATASHEET Gt3 series last update 10/11/2014 NOTE: The typical divergence will be changed by different color, chip size and chip position tolerance. The typical total divergence is the full angle measured where the luminous intensity is half of the peak value. April 9th 2018 13:05 Copyright Ledil Oy - Subject to change without prior notice - Page 2/3 Ledil Oy Salorankatu 10 24240 SALO Finland http://www.ledil.com email: ledil@ledil.com FAX: +358-2-733 8001 PRODUCT DATASHEET Gt3 series last update 10/11/2014 GENERAL INFORMATION - Product series especially designed & optimized for XB-D series of LEDs. - Special care taken to make light distribution as uniform as possible. - Lens material optical grade PMMA with high UV and temperature resistance. Allows use of high current and temperature conditions. Please find more information about used material from below: http://ledil.fi/sites/default/files/Documents/Technical/Material/PMMA%208N%20UL94_Yellow%20Card.pdf http://ledil.fi/sites/default/files/Documents/Technical/Material/PMMA%208N%20PLEXIGLAS-Datasheet.pdf April 9th 2018 13:05 Copyright Ledil Oy - Subject to change without prior notice - Page 3/3 Ledil Oy Salorankatu 10 24240 SALO Finland http://www.ledil.com email: ledil@ledil.com FAX: +358-2-733 8001 Relative intensity of 100% 75% 50% 25% 0% 70 60 50 40 30 20 10 0 -10 -20 -30 -40 -50 -60 -70 Relative intensity of C10892_GT3-M-XBD 100% 75% 50% 25% 0% 70 60 50 40 30 20 10 0 -10 -20 -30 -40 -50 -60 -70 Relative intensity of C10893_GT3-W-XBD 100% 75% 50% 25% 0% 70 60 50 40 30 20 10 0 -10 -20 -30 -40 -50 -60 -70 Relative intensity of C11624-GT3-WW-XBD 100% 75% 50% 25% 0% 70 60 50 40 30 20 10 0 -10 -20 -30 -40 -50 -60 -70 A B C D 28 4 4 17 Isometric view Scale: 1:1 3 Bottom view 60 35 Material: PMMA 2.2 3 1 DRAWN BY DATE p v08.01.2010 CHECKED BY DATE t 07.01.2010 DESIGNED BY hh DATE 07.01.2010 D 30.35 6.9 1.8 This drawing is our property. It can't be reproduced or communicated without our written agreement. k 8.9 60 Front view 1.45 2 3 Part no.s: C10891_GT3-XP-S C10891_GT3-XP-G-S C10891_GT3-OSL-S C10891_GT3-DD-S C10891_GT3-RE-ES-M C10891_GT3-Z5-S C10892_GT3-XP-M C10892_GT3-XP-G-M C10892_GT3-OSL-M C10892_GT3-DD-M C10892_GT3-XP-M C10892_GT3-Z5-M C10893_GT3-XP-W C10893_GT3-XP-G-W C10893_GT3-OSL-W C10893_GT3-DD-W C10893_GT3-RE-ES-W C11623_GT3-RE-WW C11623_GT3-N19-WW C11624_GT3-XP-WW C11624_GT3-XP-G-WW C11624_GT3-OSL-WW C11624_GT3-DD-WW C11624_GT3-Z5-WW L T F F e e I i 2 h N n d DRAWING TITLE Datasheet GT3-Series Lens SIZE DRAWING NUMBER A4 SCALE 2:1 WEIGHT(g) REV - 1 SHEET A 1/1 1