Model 9003, 9004, 9009, 9010, & 9011 Manual Step Attenuators dc to 18.0 GHz 2 Watt Ruggedized SMA Connector Description Features o Broadband - Available in a choice of frequency ranges: dc to 4, dc to 8, dc to 12.4 and dc to 18 GHz. o Wide Choice of Attenuation Ranges - A choice of five standard attenuation ranges is available: 0 to 9.0, 0 to 69 and 0 to 99 dB in 1 dB steps, and 0 to 60 and 0 to 90 dB in 10 dB steps. o Environmental - Designed to meet most environmental requirements of MIL-A-24215 (Vibration, Shock, Relative Humidity to 95% and Altitude). o In-line Configuration - Passivated stainless steel SMA connector are set parallel with control shaft (except units with right angle connector) to reduce volume for applications where space is critical. All models are bidirectional. o Precise Incremental Attenuation Accuracy - Model 9000 series has flat frequency response and small deviation from nominal attenuation at all settings (e.g., deviation is only +2.5 dB at 99 dB setting at 18 GHz). o Excellent Repeatability and Long Switch Life. o Custom Configurations Available Upon Request. o Highly Accurate Detent Stepping - Direct drive of attenuator drums eliminates gears and provides for excellent repeatability. o Safety Mechanical Stop - A mechanical stop between maximum and 0 attenuation positions on all models except 0-9 dB unit is provided to prevent large power changes at attenuator output from damaging sensitive equipment. 116 4/30/02 The Model 9000 series Step Attenuators are broadband miniature step attenuators that provide excellent performance characteristics suitable for use in high reliability 50 ohm systems and applications requiring extra-small components for the precision control of signal levels. The Model 9000 series can be used either as input or output attenuators in signal sources, receivers, field strength meters, spectrum analyzers, etc. The SMA connector furnished on all models are available in either standard or right-angle configuration. The sex of front and rear connector is optional (refer to connector specification for specific combinations available). A knob(s), marked appropriately, is supplied with each unit. Specifications NOMINAL IMPEDANCE: 50 FREQUENCY RANGE (add Model No. Prefix to Designate Range): All Models: dc to 4.0 GHz (AC) dc to 18.0 GHz (AF) Standard Incremental Attenuation Range: Model 9009: 0 to 9 dB in 1 dB steps Model 9003: 0 to 69 dB in 1 dB steps Model 9004: 0 to 99 dB in 1 dB steps Model 9010: 0 to 60 dB in 10 dB steps Model 9011: 0 to 90 dB in 10 dB steps MAXIMUM SWR: Frequency Range (GHz) dc - 4 dc - 18 9009, 9010 9011 9003 9004 1.25 1.60 1.35 1.75 POWER RATING: 2 watts average to 25C ambient temperature, derated linearly to 1 watt @ 54C. 200 watts peak (5 sec pulse width; 0.5% duty cycle) POWER COEFFICIENT: < 0.005dB/dB/watt TEMPERATURE COEFFICIENT: < 0.0004 dB/dB/C TEMPERATURE RANGE: Operating: 0C to + 54C Nonoperating: -54C to +54C 5305 Spectrum Drive, Frederick, MD 21703-7362 TEL: 301-846-9222, 800-638-2048 Fax: 301-846-9116 web: www.weinschel.com email: sales@weinschel.com Specifications--con't CALIBRATION: Insertion Loss data is supplied as follows. Other test data can be supplied at additional cost. dc to 4 GHz: At 50 MHz and 4 GHz dc to 18 GHz: At 50 MHz, 4, 8, 12 and 18 GHz INCREMENTAL PHASE SHIFT: ~0.5 per dB per GHz REPEATABILITY: Better than 0.05 dB across frequency band for switch life SWITCH LIFE: Over 1,000,000 steps SHAFT ROTATION: Clockwise for increasing attenuation. CONSTRUCTION: Drum Assembly: Aluminum alloy Housing: Phenolic or aluminum Control Shaft: Stainless steel Connector: Stainless steel Knob: Supplied with control knob INDEXING: 36 DRUM CONFIGURATIONS: Single Drum: 9009, 9010, 9011 Dual Drum: 9003, 9004 INCREMENTAL INSERTION LOSS (+dB): Model Number Model No. 9009 0.3 0.5 0.7 1.0 9003 0.6 0.8 1.0 1.5 9004 0.6 0.8 1.0 1.5 9010 0.4 0.5 0.7 1.0 9011 0.5 0.6 0.7 1.0 CONNECTOR: SMA connector per MIL-STD-348 interface dimensions - mate nondestructively with MIL-C-39012 connector. Front and rear SMA connector available in either standard or right-angle configuration, connector sex is optional as follows: Connector Options Type/Description 1 SMA, Female 2 SMA, Male* 3 SMA, Female, right-angle 4 SMA, Male, right-angle *Standard male SMA connector not available as J1 connector. WEIGHT: 9009 9010 9011 9003 9004 680 160 200 260 290 g g g g g (2.4 oz) (5.7 oz) (7.1 oz) (9.0 oz) (10.4 oz) Frequency Range (GHz) dc-4 dc-18 9009 1-9 0.3 0.5 9003 1-9 10-19 20-29 30-39 40-49 50-59 60-69 0.3 0.7 0.9 1.0 1.1 1.2 1.3 0.5 1.0 1.2 1.4 1.5 1.7 1.9 9004 1-9 10-19 20-29 30-39 40-49 50-59 60-69 70-79 80-89 90-99 0.3 0.7 0.9 1.0 1.1 1.2 1.3 1.4 1.5 1.6 0.5 1.0 1.2 1.4 1.5 1.7 1.9 2.1 2.3 2.5 9010 10 20 30 40 50 60 0.3 0.3 0.4 0.5 0.7 0.8 1.0 1.0 1.0 1.2 1.5 1.8 9011 10 20 30 40 50 60 70 80 90 0.3 0.3 0.4 0.5 0.7 0.8 0.9 1.0 1.2 1.0 1.0 1.0 1.2 1.5 1.8 2.1 2.3 2.5 MAXIMUM INSERTION LOSS (dB): Frequency Range (GHz) dc - 4 4-8 8 - 12.4 12.4 - 18 dB Range NA=Model no longer available. MODEL NUMBER DESCRIPTION: Example: AC9011 - XX - XX Frequency Range (GHz)** Basic Model Number ** Frequency Range dc-4.0 GHz (AC) dc-8.0 GHz (AD) dc-12.4 GHz (AE) dc-18.0 GHz (AF) Maximum Attenuation Value (dB) Connector Options* 1st digit is J1 side (front) 2nd digit is J2 side (rear) Available Models AC9003, AC9004, AC9009, AC9010, AC9011 No longer available, order AF as replacement No longer available, order AF as replacement AF9003, AF9004, AF9009, AF9010, AF9011 5305 Spectrum Drive, Frederick, MD 21703-7362 TEL: 301-846-9222, 800-638-2048 Fax: 301-846-9116 web: www.weinschel.com email: sales@weinschel.com 4/30/02 117 PHYSICAL DIMENSIONS: Model No. 9003 9004 9009 9010 9011 DIM A 96.3 (3.79) 106.4 (4.19) 28.7 (1.13) 41.4 (1.63) 51.6 (2.03) NOTE: 118 4/30/02 DIM B ----3.25 (0.125) 6.35 (0.250) 6.35 (0.250) All dimensions are given in mm (inches) and are maximum, unless otherwise specified. 5305 Spectrum Drive, Frederick, MD 21703-7362 TEL: 301-846-9222, 800-638-2048 Fax: 301-846-9116 web: www.weinschel.com email: sales@weinschel.com