https://www.phoenixcontact.com/us/products/2688310 I/O module-AXL F DI16/1 1H-2688310 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) AxiolineF, Digital input module, Digital inputs: 16, 24 VDC, connection method: 1-wire, transmission speed in the local bus:100 Mbps, degree of protection:IP20, including bus base module and AxiolineF connectors Product Description The module is designed for use within an AxiolineF station. It is used to acquire digital signals. You can adjust the filter times of the inputs to increase noise immunity. Filter times of 100s enable you to implement a counter function with a maximum input frequency of 5kHz in the application. Your advantages 16 digital inputs according to EN61131-2 type1 and type3 24VDC, 2.4mA Connection of sensors in single-wire technology Minimum update time of < 100 s Filter times can be adjusted in three increments: <100s, 1000s or 3000s Maximum input frequency: 5 kHz Device rating plate stored Key Commercial Data Packing unit 1 pc GTIN GTIN 4046356606455 Weight per Piece (excluding packing) 180.000 g Custom tariff number 85389091 Country of origin Germany 08/25/2020Page1/10 https://www.phoenixcontact.com/us/products/2688310 I/O module-AXL F DI16/1 1H-2688310 Technical data Dimensions Caption Dimensions Width 35 mm Height 126.1 mm Depth 54 mm Note on dimensions The depth is valid when a TH35-7,5 DIN rail is used (according to EN60715). Ambient conditions Ambient temperature (operation) -25 C ... 60 C Ambient temperature (storage/transport) -40 C ... 85 C Permissible humidity (operation) 5 % ... 95 % (non-condensing) Permissible humidity (storage/transport) 5 % ... 95 % (non-condensing) Air pressure (operation) 70 kPa ... 106 kPa (up to 3000m above sea level) Air pressure (storage/transport) 70 kPa ... 106 kPa (up to 3000m above sea level) Degree of protection IP20 Connection data Designation AxiolineF connector Connection method Push-in connection Note on the connection method Please observe the information provided on conductor cross sections in the "AxiolineF: system and installation" user manual. Applications with UL approval: only use copper conductors. Conductor cross section solid min. 0.2 mm Conductor cross section solid max. 1.5 mm Conductor cross section flexible min. 0.2 mm Conductor cross section flexible max. 1.5 mm Conductor cross section AWG min. 24 Conductor cross section AWG max. 16 Stripping length 8 mm General Mounting type DIN rail Color traffic grey A RAL 7042 Net weight 181.6 g Note on weight specifications with connectors and bus base module Mounting position any (no temperature derating) Interfaces Designation AxiolineFlocal bus 08/25/2020Page2/10 https://www.phoenixcontact.com/us/products/2688310 I/O module-AXL F DI16/1 1H-2688310 Technical data Interfaces No. of channels 2 Connection method Bus base module Transmission speed 100 Mbps Axioline potentials Designation AxiolineF local bus supply (UBus) Supply voltage 5 VDC (via bus base module) Current consumption max. 120 mA (up to HW01) max. 60 mA (as of HW02) Power consumption max. 600 mW (up to HW01) max. 300 mW (as of HW02) Designation Supply for digital input modules (UI) Supply voltage 24 VDC Supply voltage range 19.2 VDC ... 30 VDC (including all tolerances, including ripple) Current consumption max. 20 mA Power consumption max. 480 mW Protective circuit Surge protection electronic (35 V, 0.5 s) Reverse polarity protection parallel diode; with external 5A fuse (only for commissioning) Protection max. 8 A (polarity reversal protection up to 5A) Digital inputs Input name Digital inputs Description of the input EN 61131-2 types 1 and 3 Connection method Push-in connection Connection technology 1-wire Number of inputs 16 Protective circuit Polarity reversal protection of the inputs parallel diode (30V, 5s) Nominal input voltage UIN 24 VDC Nominal input current at UIN 2.4 mA Input filter time 3000 s (Default) 1000 s < 100 s Input voltage range "0" signal -3 VDC ... 5 VDC Input voltage range "1" signal 11 VDC ... 30 VDC Electrical isolation Test section 5V supply of the local bus (UBus) / 24V supply (I/Os) 500 VAC 50 Hz 1 min. 08/25/2020Page3/10 https://www.phoenixcontact.com/us/products/2688310 I/O module-AXL F DI16/1 1H-2688310 Technical data Electrical isolation 5V supply of the local bus (UBus) / functional ground 500 VAC 50 Hz 1 min. 24V supply (I/O)/functional ground 500 VAC 50 Hz 1 min. Standards and Regulations Mechanical tests Vibration resistance in acc. with EN60068-2-6/IEC60068-2-6 5g Shock in acc. with EN60068-2-27/IEC60068-2-27 30g Continuous shock according to EN60068-2-27/IEC60068-2-27 10g Protection class III (IEC61140, EN61140, VDE0140-1) Environmental Product Compliance REACh SVHC Lead 7439-92-1 China RoHS Environmentally Friendly Use Period = 50 years For details about hazardous substances go to tab "Downloads", Category "Manufacturer's declaration" Drawings Connection diagram Connection example 08/25/2020Page4/10 https://www.phoenixcontact.com/us/products/2688310 I/O module-AXL F DI16/1 1H-2688310 Block diagram Internal wiring of the terminal points 08/25/2020Page5/10 https://www.phoenixcontact.com/us/products/2688310 I/O module-AXL F DI16/1 1H-2688310 Dimensional drawing Dimensions Classifications eCl@ss eCl@ss 10.0.1 27242604 eCl@ss 4.0 27240400 eCl@ss 4.1 27240400 eCl@ss 5.0 27242200 eCl@ss 5.1 27242600 eCl@ss 6.0 27242600 eCl@ss 7.0 27242604 eCl@ss 8.0 27242604 08/25/2020Page6/10 https://www.phoenixcontact.com/us/products/2688310 I/O module-AXL F DI16/1 1H-2688310 Classifications eCl@ss eCl@ss 9.0 27242604 ETIM ETIM 3.0 EC001599 ETIM 4.0 EC001599 ETIM 5.0 EC001599 ETIM 6.0 EC001599 ETIM 7.0 EC001599 UNSPSC UNSPSC 6.01 43172015 UNSPSC 7.0901 43201404 UNSPSC 11 39121311 UNSPSC 12.01 39121311 UNSPSC 13.2 32151602 UNSPSC 18.0 32151602 UNSPSC 19.0 32151602 UNSPSC 20.0 32151602 UNSPSC 21.0 32151602 Approvals Approvals Approvals KR / NK / ABS / BSH / RINA / LR / PRS / NK / ABS / RINA / BSH / KR / BV / EAC / EAC / DNV GL / UL Listed / cUL Listed / UL Listed / cUL Listed / DNV GL Ex Approvals Approval details KR http://www.krs.co.kr/eng/main/main.aspx HMB17372-AC002 08/25/2020Page7/10 https://www.phoenixcontact.com/us/products/2688310 I/O module-AXL F DI16/1 1H-2688310 Approvals NK http://www.classnk.or.jp/hp/en/ 14A006 ABS http://www.eagle.org/eagleExternalPortalWEB/ 18-HG1767360-PDA BSH 840 RINA http://www.rina.org/en ELE030120XG LR http://www.lr.org/en LR2001902TA PRS http://www.prs.pl/ TE/2239/880590/19 NK http://www.classnk.or.jp/hp/en/ 14A006 http://www.eagle.org/eagleExternalPortalWEB/ 18-HG1767360-PDA http://www.rina.org/en ELE030120XG 840 ABS RINA BSH KR http://www.krs.co.kr/eng/main/main.aspx HMB17372-AC002 BV http://www.veristar.com/portal/veristarinfo/generalinfo/ approved/approvedProducts/equipmentAndMaterials 36433/B1 BV 08/25/2020Page8/10 https://www.phoenixcontact.com/us/products/2688310 I/O module-AXL F DI16/1 1H-2688310 Approvals EAC EAC-Zulassung EAC EAC-Zulassung DNV GL https://approvalfinder.dnvgl.com/ TAA00000DF UL Listed http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm FILE E 238705 cUL Listed http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm FILE E 238705 UL Listed http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm FILE E 238705 cUL Listed http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm FILE E 238705 DNV GL https://approvalfinder.dnvgl.com/ TAA00000DF Accessories Accessories Device marking 08/25/2020Page9/10 https://www.phoenixcontact.com/us/products/2688310 I/O module-AXL F DI16/1 1H-2688310 Accessories Insert label-EMT (35X28)R-0801602 Insert label, Roll, white, unlabeled, can be labeled with: THERMOMARK ROLLMASTER 300/600, THERMOMARK X1.2, THERMOMARK ROLL X1, THERMOMARK ROLL 2.0, THERMOMARK ROLL, mounting type: snapped into marker carrier, lettering field size: 35 x 28 mm, Number of individual labels: 500 DIN rail connector Bus connector-AXL F BS H-2700992 AxiolineF bus base module for housing type H Terminal marking Zack marker strip-ZB 20,3 AXL UNPRINTED-0829579 Zack marker strip for AxiolineF (device labeling), in 2 x 20.3 mm pitch, unprinted, 25-section, for individual labeling with B-STIFT 0.8, X-PEN, or CMS-P1-PLOTTER Zack Marker strip, flat-ZBF 10/5,8 AXL UNPRINTED-0829580 Zack Marker strip, flat, Strip, white, unlabeled, can be labeled with: PLOTMARK, CMS-P1-PLOTTER, mounting type: snap into flat marker groove, for terminal block width: 10.15 mm, lettering field size: 4 of 10.15 x 5 mm and 1 of 5.8 x 5 mm, Number of individual labels: 50 Phoenix Contact 2020 (c) - all rights reserved http://www.phoenixcontact.com 08/25/2020Page10/10