Model 1700 Series Non-Contact/Amplified Output Torque Transducer DESCRIPTION These transducers are suitable for laboratory applications as well as industrial evironments because of their compact size and multiple mounting options. The contactless transmission of supply voltage and measuring signal enables continuous operation with low maintenance. FEATURES * 0.02 Nm to 1500 Nm capacity range * 0.25 % accuracy * Built-in instrumentation amplifier (10 V output) (standard) * Speed sensor or angle encoder option * Contactless * Compact size * Wide application range Model 1700 Series PERFORMANCE SPECIFICATIONS Characteristic Torque range MECHANICAL SPECIFICATIONS Measure Characteristic Measure 0.02, 0.05, 0.1, 0.2, 0.5, 1, 2, 5, 10, 20, 50, 100, 200, 300, 500, 1000, 1500 Nm Mechanical overload 200 % of rated output ENVIRONMENTAL SPECIFICATIONS SPEED SENSING (RPM) (S) OPTION Characteristic Measure Characteristic Measure Temperature, operating 0 C to 60 C [32 F to 140 F] Speed max. 10000 RPM Temperature, compensated 5 C to 45 C [41 F to 113 F] Output Open collector Temperature effect, zero 0.02 %/K Internal pull-up 100 kOhm (5 V level) Temperature effect, span 0.01 %/K External pull-up 24 V max. I max. 20 mA Pulses/rev. 60 ELECTRICAL SPECIFICATIONS ANGLE (E) OPTION Characteristic Measure Supply voltage 12 Vdc 10 % Characteristic Measure Current consumption less than 200 mA Speed max. 3000 RPM Rise time 2 ms* Pulses/rev. 360 Limit frequency (3dB) 200 Hz Resolution 1 Voltage output 0 V to 10 V Phase shift Quadrature Internal resistance 100 ohm Ripple <100 mVpp Overall accuracy <0.25 % * Standard rise time is 2 ms for all transducers 1700 to 1706, in combination with limit frequency 200 Hz. 2 Honeywell * Sensing and Control TECHNICAL SPECIFICATIONS Model Range (Nm) Spring constant C (Nm/rad) Mass moment of inertia (g*cm2) Maximum permissible axial load (N) Maximum permissible radial load (N) 1700 0 to 0,02 16 7 35 30 1700 0 to 0,05 16 7 35 30 1701 0 to 0,1 35 10 140 3 1701 0 to 0,2 35 10 140 3 1701 0 to 0,5 45 10 160 4 1701 0 to 1 90 10 210 7 1701 0 to 2 135 10 210 13 1702 5 960 100 1200 15 1702 10 2115 100 1300 30 1702 20 3955 100 1300 60 1703 50 17 x 103 775 1800 125 1703 100 30 x 103 785 1800 215 1703 200 3 54 x 10 810 1800 450 1703 300 67 x 103 840 1800 650 1706 500 260 x 103 9835 4150 650 1706 1000 387 x 103 10140 4150 1275 1706 1500 449 x 10 10380 4150 1700 3 Non-Contact/Amplified Output Torque Transducer MOUNTING DIMENSIONS 1700 1701 1702 1703 Model dimensions 0.02/0.05 Nm 0.1/0.2/0.5/1 Nm 2 Nm 5/10/20 Nm 50/100/200/300 Nm 500/1000/1500 Nm L mm B mm H mm H1 mm D1 g6 mm D2 g6 mm D3 - 0,1 mm D4 H7 mm LK 0,1 mm L1 mm L2 mm L3 mm L4 mm L5 -0,1 mm A1 mm A2 mm M1 M2 P (DIN6885) 145 42 58 21 O15 O15 O38 O46 79 30 30 83 60 32 M3 x 6 deep M3 x 6 deep 2 x A5 x 5 x 25 170 56 73 28 O26 O26 O54 O65 72 45 45 78 42 40 M4 x 8 deep M4 x 8 deep 2 x A8 x 7 x 40 82 32 47 14 O3 O3 O15 * 63 7.5 7.5 67 50 24 M2.5 x 5 deep M2.5 x 5 deep - 89 28 48,5 14 O5 O8 O27 O2 O32 62 10 11 66 4 40 22 M3 x 5 deep M3 x 6 deep - 95 28 48,5 14 O6 O8 O27 O2.5 O32 62 14 14 66 5 40 22 M3 x 5 deep M3 x 6 deep - 1706 270 88 104 44 O45 O45 O80 O98 84 85 85 90 46 70 M6 x 12 deep M6 x 12 deep 4 x A14 x 9 x 80 * consult factory TYPICAL SYSTEM DIAGRAM 90 L L1 45 Mating Connector 023-LW185-027-LF Mating connector L2 L3 P LK H D3 D2 D4 D1 M2 H1 L5 B L4 M1 Customer Supplied Chart Recorder Alarm Panel Data Acquisition Computer PLC 2003.1 lb. L1 L2 L3 L4 A2 For reference only Display Units 7559 (for Torque Display) 7560 (for RPM Display) VALUE CLEAR UP DOWN SETUP CHAN TARE ENTER EXIT A1 External DC Power Supply (Required) 400-050 DC-DC Transformer (Optional) 560-044 Model 1700 Honeywell * Sensing and Control 3 Model 1700 Series Non-Contact/Amplified Output Torque Transducer Warranty. Honeywell warrants goods of its manufacture as being free of defective materials and faulty workmanship. Honeywell's standard product warranty applies unless agreed to otherwise by Honeywell in writing; please refer to your order acknowledgement or consult your local sales office for specific warranty details. If warranted goods are returned to Honeywell during the period of coverage, Honeywell will repair or replace, at its option, without charge those items it finds defective. The foregoing is buyer's sole remedy and is in lieu of all warranties, expressed or implied, including those of merchantability and fitness for a particular purpose. In no event shall Honeywell be liable for consequential, special, or indirect damages. While we provide application assistance personally, through our literature and the Honeywell web site, it is up to the customer to determine the suitability of the product in the application. Specifications may change without notice. The information we supply is believed to be accurate and reliable as of this printing. However, we assume no responsibility for its use. WARNING PERSONAL INJURY * DO NOT USE these products as safety or emergency stop devices or in any other application where failure of the product could result in personal injury. Failure to comply with these instructions could result in death or serious injury. Find out more Honeywell serves its customers WARNING through a worldwide network of MISUSE OF DOCUMENTATION sales offices, representatives * The information presented in this datasheet is for reference only. DO NOT USE this document as product installation information. * Complete installation, operation and maintenance information is provided in the instructions supplied with each product. and distributors. For application assistance, current specifications, pricing or name of the nearest Authorized Distributor, contact your local sales office. To learn more about Honeywell's test and measurement products, Failure to comply with these instructions could result in death or serious injury. call +1-614-850-5000, visit http://measurementsensors. honeywell.com, or e-mail inquiries to info.tm@honeywell.com Sensing and Control Honeywell 1985 Douglas Drive North Golden Valley, MN 55422 www.honeywell.com 008779-3-EN IL50 GLO January 2011 Copyright (c) 2011 Honeywell International Inc. All rights reserved.