Non-Contact/Amplified
Output Torque Transducer
Model 1700 Series
DESCRIPTION
These transducers are suitable for laboratory applications as
well as industrial evironments because of their compact size
and multiple mounting options. The contactless transmission
of supply voltage and measuring signal enables continuous
operation with low maintenance.
FEATURES
0.02 Nm to 1500 Nm capacity range
0.25 % accuracy
Built-in instrumentation amplifier (±10 V output) (standard)
Speed sensor or angle encoder option
Contactless
Compact size
Wide application range
2 Honeywell • Sensing and Control
Model 1700 Series
PERFORMANCE SPECIFICATIONS
Characteristic Measure
Torque range 0.02, 0.05, 0.1, 0.2, 0.5, 1, 2, 5, 10, 20,
50, 100, 200, 300, 500, 1000, 1500 Nm
ENVIRONMENTAL SPECIFICATIONS
Characteristic Measure
Temperature, operating 0 °C to 60 °C [32 °F to 140 °F]
Temperature, compensated 5 °C to 45 °C [41 °F to 113 °F]
Temperature effect, zero 0.02 %/°K
Temperature effect, span 0.01 %/°K
ELECTRICAL SPECIFICATIONS
Characteristic Measure
Supply voltage 12 Vdc ±10 %
Current consumption less than 200 mA
Rise time 2 ms*
Limit frequency (3dB) 200 Hz
Voltage output 0 V to ±10 V
Internal resistance 100 ohm
Ripple <100 mVpp
Overall accuracy <0.25 %
* Standard rise time is 2 ms for all transducers 1700 to 1706, in
combination with limit frequency 200 Hz.
MECHANICAL SPECIFICATIONS
Characteristic Measure
Mechanical overload 200 % of rated output
SPEED SENSING (RPM) (S) OPTION
Characteristic Measure
Speed max. 10000 RPM
Output Open collector
Internal pull-up 100 kOhm (5 V level)
External pull-up 24 V max.
I max. 20 mA
Pulses/rev. 60
ANGLE (E) OPTION
Characteristic Measure
Speed max. 3000 RPM
Pulses/rev. 360
Resolution
Phase shift Quadrature
TECHNICAL SPECIFICATIONS
Model Range
(Nm)
Spring
constant
C
(Nm/rad)
Mass
moment
of
inertia
(g•cm2)
Maximum
permissible
axial load
(N)
Maximum
permissible
radial load
(N)
1700 0 to 0,02 16 7 35 30
1700 0 to 0,05 16 7 35 30
1701 0 to 0,1 35 10 140 3
1701 0 to 0,2 35 10 140 3
1701 0 to 0,5 45 10 160 4
1701 0 to 1 90 10 210 7
1701 0 to 2 135 10 210 13
1702 5 960 100 1200 15
1702 10 2115 100 1300 30
1702 20 3955 100 1300 60
1703 50 17 x 103775 1800 125
1703 100 30 x 103785 1800 215
1703 200 54 x 103810 1800 450
1703 300 67 x 103840 1800 650
1706 500 260 x 1039835 4150 650
1706 1000 387 x 10310140 4150 1275
1706 1500 449 x 10310380 4150 1700
Honeywell • Sensing and Control 3
Non-Contact/Amplified Output Torque Transducer
MOUNTING DIMENSIONS
1700 1701 1702 1703 1706
Model dimensions 0.02/0.05 Nm 0.1/0.2/0.5/1 Nm 2 Nm 5/10/20 Nm 50/100/200/300 Nm 500/1000/1500 Nm
L mm 82 89 95 145 170 270
B mm 32 28 28 42 56 88
H mm 47 48,5 48,5 58 73 104
H1 mm 14 14 14 21 28 44
D1 g6 mm Ø3 Ø5 Ø6 Ø15 Ø26 Ø45
D2 g6 mm Ø3 Ø8 Ø8 Ø15 Ø26 Ø45
D3 - 0,1 mm Ø15 Ø27 Ø27 Ø38 Ø54 Ø80
D4 H7 mm - Ø2 Ø2.5 - - -
LK ±0,1 mm * Ø32 Ø32 Ø46 Ø65 Ø98
L1 mm 63 62 62 79 72 84
L2 mm 7.5 10 14 30 45 85
L3 mm 7.5 11 14 30 45 85
L4 mm 67 66 66 83 78 90
L5 -0,1 mm - 4 5 - - -
A1 mm 50 40 40 60 42 46
A2 mm 24 22 22 32 40 70
M1 M2.5 x 5 deep M3 x 5 deep M3 x 5 deep M3 x 6 deep M4 x 8 deep M6 x 12 deep
M2 M2.5 x 5 deep M3 x 6 deep M3 x 6 deep M3 x 6 deep M4 x 8 deep M6 x 12 deep
P (DIN6885) - - - 2 x A5 x 5 x 25 2 x A8 x 7 x 40 4 x A14 x 9 x 80
* consult factory
TYPICAL SYSTEM DIAGRAM
B
H1
H
P
L2
A2
L
L1
A1
M1
L3
D2
D3D1
L5
L4
D4
90º
45º
M2
L K
For reference only
Customer Supplied
Chart Recorder
Alarm Panel
Data Acquisition
Computer
PLC
7559 (for Torque Display)
7560 (for RPM Display)
Display Units
Mating Connector
023-LW185-027-LF Mating connector
Model 1700
DC-DC Transformer
(Optional)
560-044
External DC Power Supply
(Required)
400-050
2003.1 lb.
L1 L2 L3 L4
UP
DOWN
VALUE CLEAR CHAN TARE
ENTER
SETUP
EXIT
008779-3-EN IL50 GLO
January 2011
Copyright © 2011 Honeywell International Inc. All rights reserved.
Model 1700 Series Non-Contact/Amplified Output Torque Transducer
Sensing and Control
Honeywell
1985 Douglas Drive North
Golden Valley, MN 55422
www.honeywell.com
Find out more
Honeywell serves its customers
through a worldwide network of
sales offices, representatives
and distributors. For application
assistance, current specifica-
tions, pricing or name of the
nearest Authorized Distributor,
contact your local sales office.
To learn more about Honeywell’s
test and measurement products,
call +1-614-850-5000, visit
http://measurementsensors.
honeywell.com, or e-mail inqui-
ries to info.tm@honeywell.com
Warranty. Honeywell warrants goods of its manufacture as
being free of defective materials and faulty workmanship.
Honeywell’s standard product warranty applies unless agreed
to otherwise by Honeywell in writing; please refer to your
order acknowledgement or consult your local sales office for
specific warranty details. If warranted goods are returned to
Honeywell during the period of coverage, Honeywell will repair
or replace, at its option, without charge those items it finds
defective. The foregoing is buyers sole remedy and is in lieu
of all warranties, expressed or implied, including those of
merchantability and tness for a particular purpose. In no
event shall Honeywell be liable for consequential, special, or
indirect damages.
While we provide application assistance personally, through our
literature and the Honeywell web site, it is up to the customer to
determine the suitability of the product in the application.
Specifications may change without notice. The information we
supply is believed to be accurate and reliable as of this printing.
However, we assume no responsibility for its use.
WARNING
PERSONAL INJURY
DO NOT USE these products as safety or emergency
stop devices or in any other application where failure of
the product could result in personal injury.
Failure to comply with these instructions could result in
death or serious injury.
WARNING
MISUSE OF DOCUMENTATION
The information presented in this datasheet is for
reference only. DO NOT USE this document as product
installation information.
Complete installation, operation and maintenance
information is provided in the instructions supplied with
each product.
Failure to comply with these instructions could result in
death or serious injury.