JAN and JANTX 1N3611 thru 1N3614 and 1N3957 Vishay Semiconductors Patented* formerly Glass Passivated Rectifiers 1.0 (25.4) MIN. Features * Qualified to MIL-PRF-19500/228 * Class 1 high temperature metallurgically bonded construction brazed > 600C * 1.0 ampere operation at TA = 55C with no thermal runaway * Typical IR less than 0.1A * Cavity-free, glass passivated junction. In epoxy over hermetic glass * High temperature soldering guaranteed: 350C/10 seconds, 0.375 (9.5mm) lead length, 5 lbs. (2.3kg) tension 0.107 (2.7) 0.080 (2.0) DIA. 0.205 (5.2) 0.160 (4.1) I ED MIL I TA Reverse Voltage 200 to 1000V Forward Current 1.0A FI DO-204AL (EG1) Q RY UA L Dimensions in inches and (millimeters) (R) Mechanical Data 1.0 (25.4) MIN. Case: DO-204AL, molded epoxy over glass body (EG1) Terminals: Solder plated axial leads, solderable per MIL-STD-750, Method 2026 Polarity: Color band denotes cathode end Mounting Position: Any Weight: 0.015oz., 0.4g Flammability: Epoxy is rated UL 94V-0. 0.034 (0.86) 0.028 (0.71) DIA. * Glass-plastic encapsulation technique is covered by Patent No. 3,996,602 and brazed-lead assembly by Patent No. 3,930,306 Maximum Ratings & Thermal Characteristics Ratings at 25C ambient temperature unless otherwise specified. Prefix J = JAN Quality Level; Prefix JX = JANTX Quality Level Parameter Symbol J,JX 1N3611 J,JX 1N3612 J,JX 1N3613 J,JX 1N3614 J,JX 1N3957 Maximum repetitive peak reverse voltage VRRM 200 400 600 800 Maximum RMS voltage Unit 1000 V VRMS 140 280 420 560 700 V Maximum DC blocking voltage VDC 200 400 600 800 1000 V Maximum average forward rectified current 0.375" (9.5mm) lead length at TA = 55C IF(AV) 1.0 A Peak forward surge current 10 surges of 8.3ms each at 1 min. intervals super-imposed on IO = 750mA DC; VR = rated VRRM TA = 100C (per MIL-STD-750 m 4066) IFSM 30 A Typical thermal resistance(1) RJL RJA 38 45 C/W TJ, TSTG -65 to +175 C Operating junction and storage temperature range Barometric Pressure Hg Electrical Characteristics 8 54 87 mm 880 1100 V Ratings at 25C ambient temperature unless otherwise specified. Minimum reverse breakdown voltage at 50A VBR 220 440 660 at 1.0A, TA = 25C at 3.0A, TA = 25C at 1.0A, TA = -65C VF 1.1 1.3 1.5 V TA = 25C TA = 150C IR 1 300 A Typical reverse recovery time at IF = 0.5A, IR = 1.0A, Irr = 0.25A trr 2.0 s Typical junction capacitance at 4V, 1MHz CJ 8.0 pF Maximum instantaneous forward voltage Tp = 300s Maximum DC reverse current at rated DC blocking voltage Notes: (1) Thermal resistance from junction to ambient at 0.375" (9.5mm) lead length, P.C.B. mounted Document Number 88651 5-Mar-02 www.vishay.com 1 JAN and JANTX 1N3611 thru 1N3614 and 1N3957 Vishay Semiconductors formerly Ratings and Characteristic Curves (TA = 25C unless otherwise noted) Fig. 2 - Typical Instantaneous Forward Characteristics 10 1.0 60 Hz Resistive or Inductive Load 0.375" (9.5mm) Lead length 0.75 Instantaneous Forward Current (A) Average Forward Rectified Current (A) Fig. 1 - Forward Current Derating Curve 0.5 0.25 0 25 50 100 75 150 125 TJ = 150C 1 TJ = 25C 0.1 Pulse Width = 300s 1% Duty Cycle 0.01 0.4 175 Ambient Temperature (C) 0.8 1.0 1.2 1.4 1.6 Instantaneous Forward Voltage (V) Fig. 3 - Typical Reverse Characteristics Fig. 4 - Typical Junction Capacitance 10 20 TJ = 125C Junction Capacitance (pF) Instantaneous Reverse Current (A) 0.6 1 TJ = 75C 0.1 TJ = 25C f = 1.0 MHz Vsig = 50mVp-p 10 TJ = 25C 1 0.01 0 20 40 60 80 100 Rated Peak Reverse Voltage (%) 0.1 1 10 100 Reverse Voltage (V) Fig. 5 - Typical Transient Thermal Impedance Transient Thermal Impedance (C/W) 100 10 1 0.1 0.01 0.1 1 10 100 t, Pulse Duration, sec www.vishay.com 2 Document Number 88651 5-Mar-02