VERTICAL CHIP TYPE ALUMINUM ELECTROLYTIC CAPACITORS RVJ Chip Type, 105C Use, Large Capacitance Capacitors Series RVJ * Compatible with surface mounting. * Supplied with carrier taping. * Guarantees 2000 hours at 105C. RVJ High temperature RV Marking color : Black print (o8x6.5L) White print on a brown sleeve (o8x10L . o10x10L) Specifications Item Performance Category temperature range (C) -55 to +105 20 Less than 0.01CV or 3 whichever is larger(after 2 minutes) C: Rated capacitance(F); V: Rated voltage(V) Tolerance at rated capacitance (%) Leakage current (A) Rated voltage (V) tan (max.) Tangent of loss angle (tan) 6.3 0.30 10 0.24 16 0.22 25 0.16 35 0.13 (20C,120Hz) (20C) 50 0.12 63 0.11 100 0.10 (20C,120Hz) Rated voltage (V) -25C / +20C -40C / +20C Characteristics at high 6.3 4 8 Impedance ratio (max.) and low temperature 10 3 5 16 2 4 25 2 3 35 2 3 50 2 3 63 2 3 100 2 3 (120Hz) Test time Leakage current Percentage of capacitance change Tangent of the loss angle Endurance (105C) (Applied ripple current) 2000 hours The initial specified value or less Within 20% of initial value 200% or less of the initial specified value Shelf life (105C) Test time : 1000 hours; other items are the same as those for the endurance. Voltage application treatment : According to JIS C5101-1 Applicable standards JIS C5101-1, -18 1998 (IEC 60384-1 1992, -18 1993) Outline Drawing Coefficient of Frequency for Rated Ripple Current Unit: mm (C) Environmental item ( ): Reference size A 8.4 8.4 10.4 L 6.50.3 100.5 100.5 W 0.5 to 0.8 0.7 to 1.1 0.7 to 1.1 C 3.4 3.0 3.3 B 8.4 8.4 10.4 120 1k 10k . 100k 0.80 0.80 0.80 0.70 1 1 1 1 1.15 1.25 1.35 1.35 1.25 1.40 1.50 1.50 Part numbering system (example: 16V470F) W L oD 8 8 10 50 . 60 (P) B0.2 D0.5 (C) A0.2 Frequency(Hz) Rated voltage(V) 6.3 to 16 25 to 35 50 to 63 100 0.40.2 0.3MAX P 2.3 3.1 4.7 Casing symbol G68 G10 H10 RVJ -- RVJ Former item 16 V Rated voltage symbol Series code -- 16 V Rated voltage symbol Series code 471 M H10 Rated capacitance Capacitance symbol tolerance symbol 471 Casing symbol M U-- Additional symbol Taping symbol H10 Rated capacitance Capacitance symbol tolerance symbol Casing symbol -- Additional symbol Taping symbol * Soldering conditions and land size are described on page 14. The taping spesifications are described on page 15. Standard Ratings Rated voltage (V) 6.3 Item Case Rated capacitance (F) o D(mm) Casing symbol 10 ESR Rated ripple current Case mArms o D(mm) Casing symbol 16 ESR Rated ripple current Case mArms o D(mm) Casing symbol 25 ESR Rated ripple current Case mArms o D(mm) Casing symbol 35 ESR Rated ripple current Case mArms o D(mm) Casing symbol 50 ESR Rated ripple current Case mArms o D(mm) Casing symbol 63 ESR Rated ripple current Case mArms o D(mm) Casing symbol 100 ESR Rated ripple current Case mArms o D(mm) Casing symbol ESR Rated ripple current mArms 10 -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 22 -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 8x6.5 G68 9.1 110 99 10x10 H10 7.5 133 33 -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 8x6.5 G68 6.5 110 8x10 G10 6.0 178 10x10 H10 5.5 160 10x10 H10 5.0 133 8x6.5 G68 4.6 110 8x10 G10 4.6 178 178 10x10 H10 2.2 324 47 100 -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 8x6.5 G68 8x6.5 G68 4.3 110 -- 8x6.5 G68 5.7 110 8x10 G10 2.3 178 8x10 G10 2.0 178 10x10 H10 1.7 324 10x10 H10 1.2 330 8x10 G10 1.5 178 10x10 H10 1.3 324 10x10 H10 1.1 324 10x10 H10 0.80 324 470 10x10 H10 1.0 10x10 H10 0.50 324 10x10 H10 0.40 324 -- -- -- -- -- -- -- -- 8x10 G10 8.3 -- 8x10 G10 16.6 67 -- -- -- -- -- -- -- -- -- -- -- -- 10x10 H10 2.0 324 220 1000 -- 8x10 G10 2.0 178 8x10 G10 2.7 178 324 10x10 H10 0.92 324 10x10 H10 0.78 324 -- 8x10 G10 4.2 178 10x10 H10 3.9 160 110 3.6 8x10 G10 -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 324 10x10 H10 0.98 324 -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- (Note) Rated ripple current : 105C, 120Hz ; ESR : 20C, 120Hz NOTE Design, Specifications are subject to change without notice. Ask factory for technical specifications before purchase and/or use. 33 CAT.No.2004/2005E(2004.10.1) RVJ VERTICAL CHIP TYPE ALUMINUM ELECTROLYTIC CAPACITORS Chip Type, 105C Use, Large Capacitance Capacitors Series RVJ (large) * Surface mount device. * Supplied with taping. * Guarantees 5000 hours at 105C. RVJ (large) High temperature RV (large) Marking color : White print on a brown sleeve Specifications Item Performance Category temperature range (C) -55 to +105 20 Less than 0.01CV (after 2 minutes) C: Rated capacitance(F); V: Rated voltage(V) Tolerance at rated capacitance (%) Leakage current (A) Rated voltage (V) tan (max.) Tangent of loss angle (tan) 6.3 0.30 10 0.26 16 0.22 25 0.16 (20C,120Hz) (20C) 35 0.13 50 0.12 63 0.11 100 0.10 0.02 is added to every 1000F increase over 1000F. (20C,120Hz) Rated voltage (V) -25C / +20C -40C / +20C Characteristics at high 6.3 4 8 Impedance ratio (max.) and low temperature 10 3 5 16 2 4 25 2 3 35 2 3 50 2 3 63 2 3 100 2 3 (120Hz) Test time Leakage current Percentage of capacitance change Tangent of the loss angle Endurance (105C) (Applied ripple current) 5000 hours The initial specified value or less Within 20% of initial value 200% or less of the initial specified value Shelf life (105C) Test time : 1000 hours; other items are the same as those for the endurance. Voltage application treatment : According to JIS C5101-1 Applicable standards JIS C5101-1, -18 1998 (IEC 60384-1 1992, -18 1993) Outline Drawing Coefficient of Frequency for Rated Ripple Current Unit: mm Frequency(Hz) 0.70.3 0.3MAX Rated capacitance(F) 47 100 to 220 330 to 1000 (P) B0.2 D0.5 (C) A0.2 (C) RVJ L 13.50.5 17.50.5 -- Series code ( ): Reference size oD 12.5 12.5 A 13.0 13.0 B 13.0 13.0 C 4.9 4.9 W 1.20.2 1.20.2 P 4.6 4.6 1k 10k 100k 0.76 0.85 0.93 0.87 0.90 0.98 1 1 1 Part numbering system (example: 10V1000F) W L 120 0.50 0.70 0.80 10 V Rated voltage symbol 102 M -- R5 IE Rated capacitance Capacitance symbol tolerance symbol Casing symbol Taping symbol Casing symbol IE II * Soldering conditions and land size are described on page 14. The taping spesifications are described on page 15. Standard Ratings Rated voltage (V) 6.3 Item Case Rated capacitance (F) o D(mm) Casing symbol 10 Imp. Rated ripple current Case mArms o D(mm) Casing symbol 16 Imp. Rated ripple current Case mArms o D(mm) Casing symbol 25 Imp. Rated ripple current Case mArms o D(mm) Casing symbol 35 Imp. Rated ripple current Case mArms o D(mm) Casing symbol 50 Imp. Rated ripple current Case mArms o D(mm) Casing symbol 63 Imp. Rated ripple current Case mArms o D(mm) -- Casing symbol -- 100 Imp. -- Rated ripple current mArms o D(mm) -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 100 -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 12.5x13.5 IE 0.176 577 220 -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 12.5x13.5 IE 0.136 655 -- -- -- 330 -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 12.5x13.5 IE 0.105 747 12.5x17.5 II 0.121 763 -- -- -- 470 -- -- -- -- -- -- -- -- -- -- -- -- 12.5x13.5 IE 0.105 747 12.5x17.5 II 0.093 871 12.5x13.5 IE 0.105 747 12.5x13.5 IE 0.105 747 12.5x13.5 IE 0.105 747 -- -- -- -- -- -- -- -- Casing symbol Imp. Rated ripple current mArms -- 12.5x13.5 IE 0.26 47 1000 Case 475 -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- (Note) Rated ripple current : 105C, 120Hz ; Impedance(Imp.) : 20C, 100kHz CAT.No.2004/2005E(2004.10.1) 34 NOTE Design, Specifications are subject to change without notice. Ask factory for technical specifications before purchase and/or use. Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Elna: RVJ-50V101MH10-R RVJ-16V331MH10R