Bulletin PD-20792 rev. A 11/06 40CPQ050PbF 40CPQ060PbF 40 Amp SCHOTTKY RECTIFIER IF(AV) = 40Amp VR = 50 -60V Description/ Features Major Ratings and Characteristics Characteristics Values Units IF(AV) Rectangular 40 A VRRM 50/60 V IFSM @ tp = 5 s sine 3200 A VF 0.49 V waveform @ 20 Apk, TJ=125C 150 C TJ operation Center tap TO-247 package High purity, high temperature epoxy encapsulation for enhanced mechanical strength and moisture resistance Very low forward voltage drop (per leg) TJ The 40CPQ...PbF center tap Schottky rectifier has been optimized for very low forward voltage drop, with moderate leakage. The proprietary barrier technology allows for reliable operation up to 150 C junction temperature. Typical applications are in switching power supplies, converters, free-wheeling diodes, and reverse battery protection. - 55 to 150 C High frequency operation Guard ring for enhanced ruggedness and long term reliability Lead-Free ("PbF" suffix) Case Styles Base Common Cathode 2 1 Anode 1 3 2 Anode 2 Common Cathode TO-247AC www.irf.com 1 40CPQ050PbF, 40CPQ060PbF Bulletin PD-20782 rev. A 11/06 Voltage Ratings Part number VR Max. DC Reverse Voltage (V) VRWM Max. Working Peak Reverse Voltage (V) 40CPQ050 40CPQ060 50 60 Absolute Maximum Ratings Parameters 40CPQ... Units IF(AV) Max. Average Forward Current 40 Conditions A 50% duty cycle @ TC = 120 C, rectangular wave form A 5s Sine or 3s Rect. pulse Following any rated load condition and with 10ms Sine or 6ms Rect. pulse rated VRRM applied TJ = 25 C, IAS = 2 Amps, L = 9.0 mH * See Fig. 5 IFSM Max. Peak One Cycle Non-Repetitive 3200 Surge Current (Per Leg) * See Fig. 7 320 EAS Non-Repetitive Avalanche Energy (Per Leg) 18 mJ IAR Repetitive Avalanche Current (Per Leg) 2 A Current decaying linearly to zero in 1 sec Frequency limited by TJ max. VA = 1.5 x VR typical Electrical Specifications Parameters VFM IRM 40CPQ... Units Max. Forward Voltage Drop (Per Leg) * See Fig. 1 (1) Conditions 0.53 0.68 0.49 V V V @ 20A @ 40A @ 20A 0.64 V @ 40A Max. Reverse Leakage Current 1.7 mA TJ = 25 C (Per Leg) * See Fig. 2 96 mA TJ = 125 C (1) TJ = 25 C TJ = 125 C VR = rated VR CT Max. Junction Capacitance (Per Leg) 1600 pF VR = 5VDC (test signal range 100Khz to 1Mhz) 25C LS Typical Series Inductance (Per Leg) 7.5 nH Measured lead to lead 5mm from package body dv/dt Max. Voltage Rate of Change 10000 V/ s (Rated VR) (1) Pulse Width < 300s, Duty Cycle <2% Thermal-Mechanical Specifications Parameters 40CPQ... Units TJ Max. Junction Temperature Range -55 to 150 Tstg Max. Storage Temperature Range -55 to 150 Conditions C C RthJC Max. Thermal Resistance Junction to Case (Per Leg) 1.25 C/W DC operation RthJC Max. Thermal Resistance Junction to Case (Per Package) 0.63 C/W DC operation RthCS Typical Thermal Resistance, Case to Heatsink 0.24 C/W Mounting surface , smooth and greased wt Approximate Weight T Mounting Torque Case Style Marking Device 6 (0.21) Min. 6 (5) Max. 12 (10) * See Fig. 4 g (oz.) Kg-cm Non-lubricated threads (Ibf-in) TO-247AC(TO-3P) JEDEC 40CPQ050 40CPQ060 2 www.irf.com 40CPQ050PbF, 40CPQ060PbF Bulletin PD-20792 rev. A 11/06 1000 ReverseCurrent - I (mA) R 1000 125C 10 100C 75C 1 50C .1 25C .01 0 T =150C J 10 1 .4 .6 .8 1 1.2 30 40 50 60 10000 T = 25C J .2 20 Fig. 2 - Typical Values Of Reverse Current Vs. Reverse Voltage (Per Leg) T =125C J .1 0 10 ReverseVoltage- VR (V) JunctionCapacitance- C (pF) T Instantaneous ForwardCurrent - I (A) F 100 T =150C J 100 1.4 T =25C J 1000 100 0 5 1015 2025 30 354045 50 55 6065 1.6 ForwardVoltageDrop- V (V) FM ReverseVoltage- VR(V) Fig. 3 - Typical Junction Capacitance Vs. Reverse Voltage (Per Leg) Fig. 1 - Max. Forward Voltage Drop Characteristics (Per Leg) Thermal Impedance- ZthJC(C/W ) 10 1 .1 D=0.50 D=0.33 D=0.25 D=0.17 D=0.08 P DM t 1 t2 Notes: 1. Dutyfactor D= t1/ t2 .01 SinglePulse (Thermal Resistance) .001 .00001 .0001 .001 2. PeakT =P xZ +T J DM thJC C .01 .1 1 10 100 t , Rectangular PulseDuration(Seconds) 1 Fig. 4 - Max. Thermal Impedance ZthJC Characteristics (Per Leg) www.irf.com 3 40CPQ050PbF, 40CPQ060PbF Bulletin PD-20782 rev. A 11/06 16 RthJC (DC) =1.25C/W AveragePower Loss- (Watts) AllowableCaseTemperature- (C) 155 145 DC 135 125 0 5 10 15 20 25 D=0.08 14 D=0.17 D=0.25 12 D=0.33 D=0.50 10 8 RMSLimit 6 DC 4 2 0 0 30 5 10 15 20 25 30 AverageForwardCurrent - I (A) F(AV) AverageForwardCurrent - IF(AV) (A) Fig. 5 - Max. Allowable Case Temperature Vs. Average Forward Current (Per Leg) Fig. 6 - Forward Power Loss Characteristics (Per Leg) 10000 Non-Repetitive Surge Current - I FSM (A) At Any Rated Load Condition And With Rated RRM V Applied Following Surge 1000 100 10 100 1000 10000 Square Wave Pulse Duration - t p (microsec) Fig. 7 - Max. Non-Repetitive Surge Current (Per Leg) L DUT IRFP460 Rg = 25 ohm CURRENT MONITOR HIGH-SPEED SWITCH FREE-WHEEL DIODE + Vd = 25 Volt 40HFL40S02 Fig. 8 - Unclamped Inductive Test Circuit 4 www.irf.com 40CPQ050PbF, 40CPQ060PbF Bulletin PD-20792 rev. A 11/06 Outline Table Conform to JEDEC outline TO-247AC (TO-3P) Dimensions in millimeters and (inches) Marking Information EXAMPLE: THIS IS A 40CPQ060 WITH ASSEMBLY LOT CODE 5657 ASSEMBLED ON WW 35, 2000 IN ASSEMBLY LINE "H" www.irf.com INTERNATIONAL RECTIFIER LOGO PART NUMBER 40CPQ060 P035H 56 ASSEMBLY LOT CODE 57 DATE CODE P = LEAD-FREE YEAR 0 = 2000 WEEK 35 LINE H 5 40CPQ050PbF, 40CPQ060PbF Bulletin PD-20782 rev. A 11/06 Ordering Information Table Device Code 40 C P Q 1 2 3 4 060 PbF 5 6 1 - Current Rating (40 = 40A) 2 - Circuit Configuration 3 - Package 4 - Schottky "Q" Series 5 - Voltage Code 6 - y none = Standard Production C = Common Cathode P = TO-247 050 = 50V 060 = 60V y PbF = Lead-Free Tube Standard Pack Quantity : 25 pieces Data and specifications subject to change without notice. This product has been designed and qualified for Industrial Level and Lead-Free. Qualification Standards can be found on IR's Web site. IR WORLD HEADQUARTERS: 233 Kansas St., El Segundo, California 90245, USA Tel: (310) 252-7105 TAC Fax: (310) 252-7309 Visit us at www.irf.com for sales contact information. 11/06 6 www.irf.com