SG PARAMETER SYMBOL MAX UNITS 1 1 1 1 1 1 1 Quiesent Current Input Offset Voltage Input Offset Voltage Input Offset Voltage Input Bias Current + IN Input Bias Current -IN Input Offset Current IQ VOS VOS VOS + IB -IB IOS 25C 25C 25C 25C 25C 25C 25C 15 2.5 15 20 15 15 15 VIN = 0, AV = 100 VIN = 0, AV = 100 VIN = 0, AV = 100 VIN = 0, AV = 100 VIN = 0 VIN = 0 VIN = 0 30 10 10 14 1000 1000 500 mA mV mV mV nA nA nA 3 3 3 3 3 3 3 Quiesent Current Input Offset Voltage Input Offset Voltage Input Offset Voltage Input Bias Current + IN Input Bias Current -IN Input Offset Current IQ VOS VOS VOS + IB -IB IOS -55C -55C -55C -55C -55C -55C -55C 15 2.5 15 20 15 15 15 VIN = 0, AV = 100 VIN = 0, AV = 100 VIN = 0, AV = 100 VIN = 0, AV = 100 VIN = 0 VIN = 0 VIN = 0 30 14 14 18 1000 1000 500 mA mV mV mV nA nA nA 2 2 2 2 2 2 2 Quiesent Current Input Offset Voltage Input Offset Voltage Input Offset Voltage Input Bias Current + IN Input Bias Current -IN Input Offset Current IQ VOS VOS VOS + IB -IB IOS 125C 125C 125C 125C 125C 125C 125C 15 2.5 15 20 15 15 15 VIN = 0, AV = 100 VIN = 0, AV = 100 VIN = 0, AV = 100 VIN = 0, AV = 100 VIN = 0 VIN = 0 VIN = 0 40 15 15 19 1000 1000 500 mA mV mV mV nA nA nA 4 4 4 4 4 4 4 4 Output Voltage IO= 2A Output Voltage IO= 100mA Output Voltage IO= 1A Stability/Noise Crosstalk Slew Rate Open Loop Gain Common-mode Rejection VO VO VO EN XTLK SR AOL CMR 25C 25C 25C 25C 25C 25C 25C 25C 9.5 11 4.8 15 15 15 15 17 RL = 3 RL = 100 RL = 3 RL = 500, AV = 1 CL = 1.5nF RL = 3 RL = 500 RL = 500, F =10Hz RL = 500, VCM = 14V 6.0 9.9 2.8 6 6 6 6 6 6 6 Output Voltage IO= 2A Output Voltage IO= 100mA Output Voltage IO= 1A Stability/Noise Slew Rate Open Loop Gain Common-mode Rejection VO VO VO EN SR AOL CMR -55C -55C -55C -55C -55C -55C -55C 9.5 11 4.8 15 15 15 17 RL = 3 RL = 100 RL = 3 RL = 500, AV = 1, CL = 1.5nF RL = 500 RL = 500, F = 10Hz RL = 500, VCM = 14V 6.0 9.9 2.8 5 5 5 5 5 5 5 Output Voltage IO= 1A Output Voltage IO= 100mA Output Voltage IO= 750mA Stability/Noise Slew Rate Open Loop Gain Common-mode Rejection VO VO VO EN SR AOL CMR 125C 125C 125C 125C 125C 125C 125C 4.8 11 4.0 15 15 15 17 RL = 3 RL = 100 RL = 3 RL = 500, AV = 1, CL = 1.5nF RL = 500 RL = 500, F = 10Hz RL = 500, VCM = 14V 2.8 9.9 2.25 BURN IN CIRCUIT TEMP. POWER TEST CONDITIONS 1.0 50 .5 75 60 1.0 V V V mV V/S dB dB 1.0 V V V mV V/S dB dB .5 75 60 .5 75 60 V V V mV dB V/S dB dB * These components are used to stabilize device due to poor high frequency characteristics of burn in board. ** Input signals are calculated to result in internal power dissipation of approximately 2.1W at case temperature = 125C. MIN This data sheet has been carefullyCORPORATION checked and is believed to be reliable, however, no responsibility is assumed for possible*inaccuracies or omissions. All specifications subject to change without notice. APEX MICROTECHNOLOGY * TELEPHONE (520) 690-8600 * FAX (520) 888-3329 ORDERS (520) 690-8601 * EMAILare prodlit@apexmicrotech.com PA74MU REV A MARCH 2004 (c) 2004 Apex Microtechnology Corp. 1