PHOTOCOUPLER
PS2715-1
HIGH CTR, AC INPUT
4-PIN SOP PHOTOCOUPLER −NEPOC Series−
DESCRIPTION
The PS2715-1 is an optically coupled isolator containing GaAs light emitting diodes and an NPN silicon
phototransistor in a plastic SOP for high density applications.
The package is an SOP (Small Outline Package) type for high density mounting applications.
FEATURES
• AC input response
• High current transfer ratio (CTR = 200% TYP. @ IF = ±1 mA)
• High isolation voltage (BV = 3 750 Vr.m.s.)
• Small and thin package (4-pin SOP)
• Ordering number of tape product: PS2715-1-F3, F4
• Pb-Free product
• Safety standards
1. Anode, Cathode
2. Cathode, Anode
3. Emitter
4. Collector
43
12
(Top View)
PIN CONNECTION
• UL approved: File No. E72422
• DIN EN60747-5-2 (VDE0884 Part2) approved (Option)
APPLICATIONS
• Programmable logic controllers
• Modem/FAX
The mark shows major revised points.
Document No. PN10247EJ02V0DS (2nd edition)
Date Published April 2005 CP(K)
PS2715-1
PACKAGE DIMENSIONS (UNIT: mm)
4±0.5
7.0±0.3
4.4
0.5±0.3
0.15
+0.10
–0.05
0.1±0.1
2.1±0.2
2.54
0.4
+0.10
–0.05
0.25 M
MARKING EXAMPLE
N
0 03
CTR Rank Code
Year Assembled
(Last 1 Digit)
Week Assembled
2715
N003
No. 1 pin
Mark Assembly Lot
*1
*1 Bar : Pb-Free
Remark "PS" and "-1" are omitted from original type number.
Trade Mark
Type Number
Data Sheet PN10247EJ02V0DS
2
PS2715-1
ORDERING INFORMATION
Part Number Order Number Solder Plating
Specification Packing Style Safety Standard
Approval Application Part
Number*1
PS2715-1 PS2715-1 Solder Magazine case 100 pcs Standard products PS2715-1
PS2715-1-F3 PS2715-1-F3 contains lead Embossed Tape 3 500 pcs/reel (UL approved)
PS2715-1-F4 PS2715-1-F4
PS2715-1-V PS2715-1-V Magazine case 100 pcs DIN EN60747-5-2
PS2715-1-V-F3 PS2715-1-V-F3 Embossed Tape 3 500 pcs/reel (VDE0884 Part2)
PS2715-1-V-F4 PS2715-1-V-F4 Approved (Option)
PS2715-1 PS2715-1-A Pb-Free Magazine case 100 pcs Standard products
PS2715-1-F3 PS2715-1-F3-A Embossed Tape 3 500 pcs/reel (UL approved)
PS2715-1-F4 PS2715-1-F4-A
PS2715-1-V PS2715-1-V-A Magazine case 100 pcs DIN EN60747-5-2
PS2715-1-V-F3 PS2715-1-V-F3-A Embossed Tape 3 500 pcs/reel (VDE0884 Part2)
PS2715-1-V-F4 PS2715-1-V-F4-A Approved (Option)
*1 For the application of the Safety Standard, following part number should be used.
ABSOLUTE MAXIMUM RATINGS (Unless otherwise specified, TA = 25°C)
Parameter Symbol Ratings Unit
Diode Forward Current (DC) IF ±50 mA
Power Dissipation Derating
∆
PD/°C 0.8 mW/°C
Power Dissipation PD 80 mW
Peak Forward Current*1 IFP ±0.5 A
Transistor Collector to Emitter Voltage VCEO 40 V
Emitter to Collector Voltage VECO 5 V
Collector Current IC 40 mA
Power Dissipation Derating
∆
PC/°C 1.5 mW/°C
Power Dissipation PC 150 mW
Isolation Voltage*2 BV 3 750 Vr.m.s.
Operating Ambient Temperature TA –55 to +100 °C
Storage Temperature Tstg –55 to +150 °C
*1 PW = 100
µ
s, Duty Cycle = 1%
*2 AC voltage for 1 minute at TA = 25°C, RH = 60% between input and output.
Pins 1-2 shorted together, 3-4 shorted together.
Data Sheet PN10247EJ02V0DS 3
PS2715-1
ELECTRICAL CHARACTERISTICS (TA = 25°C)
Parameter Symbol Conditions MIN. TYP. MAX. Unit
Diode Forward Voltage VF IF = ±5 mA 1.15 1.4 V
Terminal Capacitance Ct V = 0 V, f = 1 MHz 60 pF
Transistor Collector to Emitter Dark
Current ICEO IF = 0 mA, VCE = 40 V 100 nA
Coupled Current Transfer Ratio
(IC/IF) CTR IF = ±1 mA, VCE = 5 V 100 200 400 %
Collector Saturation Voltage VCE (sat) IF = ±1 mA, IC = 0.2 mA 0.3 V
Isolation Resistance RI-O VI-O = 1 kVDC 1011
Ω
Isolation Capacitance CI-O V = 0 V, f = 1 MHz 0.4 pF
Rise Time*1 tr VCC = 5 V, IC = 2 mA, RL = 100 Ω 4
µ
s
Fall Time*1 tf 5
*1 Test circuit for switching time
V
CC
V
OUT
I
F
R
L
= 100 Ω
50 Ω
Pulse Input
In monitor
PW = 100 s
Duty cycle = 1/10
µ
Data Sheet PN10247EJ02V0DS
4
PS2715-1
TYPICAL CHARACTERISTICS (Unless otherwise specified, TA = 25°C)
Ambient Temperature T
A
(˚C)
Diode Power Dissipation P
D
(mW)
DIODE POWER DISSIPATION vs.
AMBIENT TEMPERATURE
Ambient Temperature T
A
(˚C)
Transistor Power Dissipation P
C
(mW)
TRANSISTOR POWER DISSIPATION
vs. AMBIENT TEMPERATURE
Forward Voltage V
F
(V)
Forward Current I
F
(mA)
FORWARD CURRENT vs.
FORWARD VOLTAGE
Collector to Emitter Voltage V
CE
(V)
Collector Current I
C
(mA)
COLLECTOR CURRENT vs.
COLLECTOR TO EMITTER VOLTAGE
Ambient Temperature T
A
(˚C)
Collector to Emitter Dark Current I
CEO
(nA)
COLLECTOR TO EMITTER DARK
CURRENT vs. AMBIENT TEMPERATURE
Collector Saturation Voltage VCE(sat) (V)
Collector Current IC (mA)
COLLECTOR CURRENT vs.
COLLECTOR SATURATION VOLTAGE
100
10
1
0.1
0.01
0.0 0.5 1.0 1.5 2.0
0˚C
–25˚C
–50˚C
+60˚C
+25˚C
T
A
= +100˚C
200
150
100
50
025 50 75 100
6842010
25
20
15
10
5
I
F
= 10 mA
5 mA
2 mA
1 mA
0.5 mA
–25 025 50 75 100
1
10
100
1 000
10 000
V
CE
= 40 V
20 V
10 V
0.1
1
10
100
0.0 0.2 0.4 0.6 0.8 1.0
2 mA
5 mA
10 mA
1 mA
I
F
= 0.5mA
100
40
60
20
025 50 75 100
80
Remark The graphs indicate nominal characteristics.
Data Sheet PN10247EJ02V0DS 5
PS2715-1
FREQUENCY RESPONSE
Frequency f (kHz)
Normalized Gain Gv
LONG TERM CTR DEGRADATION
Time (Hr)
CTR (Relative Value)
Forward Current I
F
(mA)
Current Transfer Ratio CTR (%)
CURRENT TRANSFER RATIO vs.
FORWARD CURRENT
Normalized to 1.0
at T
A
= 25˚C,
I
F
= 1 mA, V
CE
= 5 V
Ambient Temperature T
A
(˚C)
Normalized Current Transfer Ratio CTR
NORMALIZED CURRENT TRANSFER
RATIO vs. AMBIENT TEMPERATURE
Switching Time t ( s)
µ
Load Resistance R
L
(kΩ)
SWITCHING TIME vs.
LOAD RESISTANCE
Load Resistance R
L
(kΩ)
SWITCHING TIME vs.
LOAD RESISTANCE
Switching Time t ( s)
µ
100
10
1
0.1 10 k
1 k
10010
I
C
= 2 mA,
V
CC
= 5 V,
CTR = 200%
0
–5
–10
–15
–20
–25
0.1 110 100 1 000
100 Ω
300 Ω
R
L
= 1 kΩ
1.2
1.0
0.8
0.6
0.4
0.2
010
2
10
3
10
4
10
5
10
6
10
T
A
= 25˚C
T
A
= 60˚C
I
F
= 1 mA
t
f
t
r
t
d
t
s
0.1
1
10
100
1 000 I
F
= 1 mA,
V
CC
= 5 V,
CTR = 200%
100 1k 10 k 100 k
t
f
t
s
t
r
t
d
1.2
1.4
–50
1.0
0.8
0.6
0.4
0.2
0.0 –25 025
50 75 100 0.1 110 100
0
100
200
300
400
500 V
CE
= 5 V,
n = 3
1.6
0.01
Remark The graphs indicate nominal characteristics.
Data Sheet PN10247EJ02V0DS
6
PS2715-1
TAPING SPECIFICATIONS (in millimeters)
Tape Direction
Outline and Dimensions (Reel)
Packing: 3 500 pcs/reel
2.0±0.5
R 1.0
13.0±0.2
φ
21.0±0.8
φ
330±2.0
φ
100±1.0
φ
2.0±0.5
11.9 to 15.4
Outer edge of
flange
17.5±1.0
13.5±1.0
13.0±0.2
φ
PS2715-1-F3 PS2715-1-F4
1.55±0.1
2.0±0.05
4.0±0.1
1.75±0.1
4.6±0.1
2.9 MAX.
0.3
8.0±0.1
Outline and Dimensions (Tape)
2.4±0.1
1.5+0.1
–0
7.4±0.1
5.5±0.05
12.0±0.2
Data Sheet PN10247EJ02V0DS 7
PS2715-1
NOTES ON HANDLING
1. Recommended soldering conditions
(1) Infrared reflow soldering
• Peak reflow temperature 260°C or below (package surface temperature)
• Time of peak reflow temperature 10 seconds or less
• Time of temperature higher than 220°C 60 seconds or less
• Time to preheat temperature from 120 to 180°C 120±30 s
• Number of reflows Three
• Flux Rosin flux containing small amount of chlorine (The flux with a
maximum chlorine content of 0.2 Wt% is recommended.)
120±30 s
(preheating)
220˚C
180˚C
Package Surface Temperature T (˚C)
Time (s)
Recommended Temperature Profile of Infrared Reflow
(heating)
to 10 s
to 60 s
260˚C MAX.
120˚C
(2) Wave soldering
• Temperature 260°C or below (molten solder temperature)
• Time 10 seconds or less
• Preheating conditions 120°C or below (package surface temperature)
• Number of times One (Allowed to be dipped in solder including plastic mold portion.)
• Flux Rosin flux containing small amount of chlorine (The flux with a maximum chlorine
content of 0.2 Wt% is recommended.)
(3) Soldering by soldering iron
• Peak temperature (lead part temperature) 350°C or below
• Time (each pins) 3 seconds or less
• Flux Rosin flux containing small amount of chlorine (The flux with a
maximum chlorine content of 0.2 Wt% is recommended.)
(a) Soldering of leads should be made at the point 1.5 to 2.0 mm from the root of the lead.
(b) Please be sure that the temperature of the package would not be heated over 100°C.
Data Sheet PN10247EJ02V0DS
8
PS2715-1
(4) Cautions
• Fluxes
Avoid removing the residual flux with freon-based and chlorine-based cleaning solvent.
2. Cautions regarding noise
Be aware that when voltage is applied suddenly between the photocoupler’s input and output or between
collector-emitters at startup, the output transistor may enter the on state, even if the voltage is within the absolute
maximum ratings.
USAGE CAUTIONS
1. Protect against static electricity when handling.
2. Avoid storage at a high temperature and high humidity.
Data Sheet PN10247EJ02V0DS 9
4590 Patrick Henry Drive
Santa Clara, CA 95054-1817
Telephone: (408) 919-2500
Facsimile:
(
408
)
988-0279
Subject: Compliance with EU Directives
CEL certifies, to its knowledge, that semiconductor and laser products detailed below are compliant
with the requirements of European Union (EU) Directive 2002/95/EC Restriction on Use of Hazardous
Substances in electrical and electronic equipment (RoHS) and the requirements of EU Directive
2003/11/EC Restriction on Penta and Octa BDE.
CEL Pb-free products have the same base part number with a suffix added. The suffix –A indicates
that the device is Pb-free. The –AZ suffix is used to designate devices containing Pb which are
exempted from the requirement of RoHS directive (*). In all cases the devices have Pb-free terminals.
All devices with these suffixes meet the requirements of the RoHS directive.
This status is based on CEL’s understanding of the EU Directives and knowledge of the materials that
go into its products as of the date of disclosure of this information.
Restricted Substance
per RoHS Concentration Limit per RoHS
(values are not yet fixed) Concentration contained
in CEL devices
-A -AZ
Lead (Pb) < 1000 PPM Not Detected (*)
Mercury < 1000 PPM Not Detected
Cadmium < 100 PPM Not Detected
Hexavalent Chromium < 1000 PPM Not Detected
PBB < 1000 PPM Not Detected
PBDE < 1000 PPM Not Detected
If you should have any additional questions regarding our devices and compliance to environmental
standards, please do not hesitate to contact your local representative.
Important Information and Disclaimer: Information provided by CEL on its website or in other communications concerting the substance
content of its products represents knowledge and belief as of the date that it is provided. CEL bases its knowledge and belief on information
provided by third parties and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better
integrate information from third parties. CEL has taken and continues to take reasonable steps to provide representative and accurate
information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. CEL and CEL
suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for
release.
In no event shall CEL’s liability arising out of such information exceed the total purchase price of the CEL part(s) at issue sold by CEL to
customer on an annual basis.
See CEL Terms and Conditions for additional clarification of warranties and liability.
