14.85MHZCFPT-9001AP1BLF - IQD Frequency Products, Ltd.

TCXOs

IQD Frequency Products Ltd, Station Road, Crewkerne, Somerset TA18 8AR, United Kingdom

Tel: +44 (1460) 270200; Fax: +44 (1460) 72578;

Email: info@iqdfrequencyproducts.com Web: www.iqdfrequencyproducts.com

CFPT-9000 SMD TCXO/TCVCXOs

ISSUE 12; 1 NOVEMBER 2008 - RoHS 2002/95/EC

Description

Sub 1ppm performance TCXO manufactured for us by

▪Rakon utilising their Pluto™ ASIC technology, a single chip

oscillator and analogue compensation circuit operating over

an extended temperature range. Its ability to function down to

a supply voltage of 2.4V and low power consumption make it

particularly suitable for mobile applications

Package Outline

7 x 5mm

▪

Standard Frequencies

3.2, 5, 6.4, 8.192, 9.6, 12.688375, 10, 12.8, 13, 14.4, 14.85,

▪16.384, 16.367, 16.8, 19.2, 19.44, 19.8, 20, 24.5535, 32.768,

38.88, 40MHz

Output Compatibility & Load

HCMOS 15pF

▪

ACMOS 50pF max.

▪(available on request, contact sales ofce)

Sinewave 10k

▪W // 10pF, AC-coupled

Clipped sinewave 10k

▪W // 10pF, AC-coupled

Frequency Stability

Temperature: see table

▪

Typical Supply Voltage Variation ±10% < ±0.2 ppm*

▪

Typical Load Coefcient 15pF ±5pF < ±0.2 ppm*

▪*Dependent on frequency and output type

Frequency Adjustment

Three options with external Voltage Control applied to Pad 10:

A - Ageing adjustment: > ±5ppm, frequency < 20MHz

▪ (Standard Option)

> ±7ppm, frequency > 20MHz

B - No frequency adjustment initial calibration @ 25°C

▪ < ±1.0 ppm

C - High Pulling ±10ppm to ±50ppm can be available

▪ depending on frequency and stability options.

Please consult our sales ofce

Linearity: < 1%

▪

Slope: Positive

▪

Input resistance: > 100k

▪W

Modulation bandwidth: > 2kHz

▪

Standard voltage control ranges:

▪Without reference voltage - Vs=5.0V 2.5V±1V

Without reference voltage - Vs=3.3V 1.65V±1V

With reference voltage - Vc=0V to Vref

Storage Temperature Range

–55 to 125°C

▪

Tri-State Operation

Logic ‘1’ (>60%Vs) to Pad 8 enables output

▪

Logic ‘0’ (<20%Vs) to Pad 8 disables output

▪When at logic ‘0’, the output stage is disabled for all output

options, but the oscillator and compensation circuit are still

active (current consumption <1mA)

Supply Voltage

Standard 3.3V, 5.0V ( see table)

▪

Supply voltages in the range 2.4 to 6.0V available to order,

▪please contact our sales ofce

Supply Current

HCMOS Typically:

▪1+Frequency(MHz)*Supply(V)*{Load(pF)+15}*10–3 mA

e.g. 20MHz, 5V, 15pF ≈ 4mA

Sinewave <8mA

▪

Clipped Sinewave Typically:

▪1+Frequency(MHz)*1.2*{Load(pF)+30}*10–3mA

Ageing

±1ppm maximum in rst year, frequency <20MHz

▪

±2ppm maximum in rst year, frequency > 0MHz

▪

±3ppm maximum for 10 years (including the rst year),

▪frequency <20MHz

±5ppm maximum for 10 years (includng the rst year),

▪frequency >20MHz

After Reow

±1ppm max

▪

Reference Voltage, Vref

Optional reference voltage output on Pad 1, suitable for

▪potentiometer supply or DAC reference.

1. No output (standard option)

2. 2.2V, for Min. Vs>2.4V

3. 2.7V, for Min. Vs>3.0V

4. 4.2V, for Min. Vs>4.5V

Maximum load current (mA) = Vref/10

For manual frequency adjustment connect an external 50kW

potentiometer between Pad 1 (Reference Voltage) and Pad 4

(GND) with wiper connected to Pad 10 (Voltage Control). Please

specify reference voltage as part of the ordering code

Environmental

Vibration: IEC 60068-2-6 Test Fc Procedure B4, 10-60Hz

▪1.5mm displacement, 60 –2000Hz at 10gn, 30 minutes in

each of three mutually perpendicular planes at 1 octave per

minute

Shock: IEC 60068-2-27 Test Ea, 1500g acceleration for

▪0.5ms duration, 1/2 sine pulse, 3 shocks in each direction

along three mutually perpendicular planes

Solderabiltiy: MIL-STD-202, Method 208, Category 3

▪

Marking Includes

Factory code + Manufacturing identier (xx) + Pad 1 / Static

▪sensitivity identier (Triangle) + Part Number (Four digits) +

Date Code

Packaging

Bulk or Tape & Reel

▪

Minimum Order Information Required

Frequency + Model Number + Frequency Stability vs

▪Operating Temperature Range Code + Reference Voltage

Code + Frequency Adjustment Code

TCXOs

IQD Frequency Products Ltd, Station Road, Crewkerne, Somerset TA18 8AR, United Kingdom

Tel: +44 (1460) 270200; Fax: +44 (1460) 72578;

Email: info@iqdfrequencyproducts.com Web: www.iqdfrequencyproducts.com

Outline (mm)

7.0 ± 0.15

5.0 ± 0.15

2.0 max

567

1.0

1.00

Pad Connections

1. V ref

2. N/C

3. DC Coupled Output

(do not connect)

4. GND

5. Output

6. N/C

7. N/C

8. Tri-state Control (Enable)*

9. +Vs

10.Voltage Control*

*leave unconnected if not required.

2.54

0.6

0.80

1.27

0.8

1.27

Solder pad layout

2.54 0.63

0.81

2.03

2.54

7.11

5.08

Test Circuit

1234

10 5

9 8 7 6

Output

Voltage

Control

Tri-state

control

100nF

50k

Ω

Output Waveform

90%Vs

10%Vs

50%Vs

Duty cycle = t x 100(%)

TCXOs

IQD Frequency Products Ltd, Station Road, Crewkerne, Somerset TA18 8AR, United Kingdom

Tel: +44 (1460) 270200; Fax: +44 (1460) 72578;

Email: info@iqdfrequencyproducts.com Web: www.iqdfrequencyproducts.com

Phase Noise (typical gures)

Frequency Frequency offset from

carrier: 10Hz

Frequency offset from

carrier: 100Hz

Frequency offset from

carrier: 1kHz

Frequency offset from

carrier: 10kHz

Frequency offset from

carrier: 100kHz

13.0MHz –95 dBc/Hz –120 dBc/Hz –135 dBc/Hz –140 dBc/Hz –145 dBc/Hz

Electrical Specication - limiting values

Frequency Range Supply Voltage Output Voltage Output Levels Rise Time (tr) Fall Time (tf) Duty Cycle Model Number

1.25 to 40.0MHz 3.3V ±10% HCMOS 15pF VoH > 90% Vs

VoL < 10% Vs

8ns 8ns 45/55% CFPT-9006

1.25 to 40.0MHz 5.0V ±10% HCMOS 15pF VoH > 90% Vs

VoL < 10% Vs

7ns 7ns 45/55% CFPT-9001

10.0 to 40.0MHz 3.3V ±10% Sine 10kW//10pF < 20MHz > 1 Vpk-pk

> 20MHz > 0.5Vpk-pk

– – CFPT-9007

10.0 to 40.0MHz 5.0V ±10% Sine 10kW//10pF < 20MHz > 1 Vpk-pk

> 20MHz > 0.5Vpk-pk

– – CFPT-9003

10.0 to 40.0MHz 3.3V ±10% Clipped Sinewave

10kW//10pF

Vpk-pk > 0.8V – – CFPT-9008

10.0 to 40.0MHz 5.0V ±10% Clipped Sinewave

10kW//10pF

Vpk-pk > 0.8V – – CFPT-9005

Frequency Stabilities over Operating Temperature Range

Operating

Temperature

Ranges

Frequency Stabilities v Operating Temperature Range

±0.3ppm ±0.5ppm ±1.0ppm ±1.5ppm ±2.0ppm ±2.5ppm

0 to 50°C Code AP Code EP Code FP Code CP Code GP Code HP

0 to 70°C Code AC* Code EC Code FC Code CC Code GC Code HC

–20 to 70°C Code AS* Code ES Code FS Code CS Code GS Code HS

–30 to 75°C Code AU* Code EU* Code FU Code CU Code GU Code HU

–40 to 85°C Code AX* Code EX* Code FX Code CX Code GX Code HX

Ordering Example 10.0MHz CFPT-9001 CX 1 A LF

Frequency

Model Number

Frequency Stability vs Operating Temperature Code

Reference Voltage Code

Frequency Adjustment Code

Lead-Free Version

(For reference voltage and frequency adjustment codes see main text)

Note *Codes may not be available for all frequencies