MX555ABB200M000
Ultra-Low Jitter 200MHz LVDS XO
ClockWorks® FUSION
General Description
The MX555ABB200M000 is an ultra-low phase jitter
XO with LVDS output optimized for high line rate
applications.
Features
• 200MHz LVDS
• Typical phase noise:
- 94fs (Integration range: 1.875MHz-20MHz)
• ±50ppm total frequency stability
• -40°C to +85°C temperature range
• Industry standard 6-Pin 5mm x 3.2mm LGA
package
Absolute Maximum Ratings¹
Supply Voltage (VIN)..................................................+4.6V
Lead Temperature (soldering, 10s)..............................260°C
Case Temperature........................................................115°C
Storage Temperature (T )............................-65°C to +125°C
S
ESD Machine Model.....................................................200V
ESD Rating (HBM).........................................................2kV
Operating Ratings²
Supply Voltage (VIN).......................+2.375V to +3.63V
Ambient Temperature (TA)....................-40°C to +85°C
Junction Thermal Resistance
LGA (T ) Still Air.....................................58°C/W
JA
Electrical Characteristics
VDD = 2.375 - 3.63V, TA = -40°C to +85°C, outputs terminated with 100 Ohms between Q and /Q.³
Symbol Parameter Condition Min. Typ. Max. Units
IDD Supply Current 90 100 mA
F0 Center Frequency 200 MHz
Frequency Stability Note 4 ±50 ppm
Øj Phase Noise Integration Range (12kHz to 20MHz)
Integration Range (1.875MHz to 20MHz) 140
94 fsRMS
Tstart Start-Up Time 20 ms
TR/TF Rise/Fall time 100 400 ps
Duty Cycle 45 55 %
VOH Output High Voltage
VOH max = VCM max + 1/2 VOD max LVDS output levels 1.248 1.375 1.602 V
VOL Output Low Voltage
VOL min = VCM min - 1/2 VOD max LVDS output levels 0.898 1.025 1.252 V
VOD Output Differential Voltage 247 350 454 mV
VCM Common Mode Output Voltage 1.125 1.2 1.375 V
Notes:
1. Exceeding the absolute maximum ratings may damage the device.
2. The device is not guaranteed to function outside its operating ratings.
3. Guaranteed after thermal equilibrium.
4. Inclusive of initial accuracy, temperature drift, aging, shock, vibration.
ClockWorks is a registered trademark of Microchip Technology Inc.
Microchip Technology Inc. http://www.microchip.com
May 14, 2018 Revision 1.0
tcghelp@microchip.comMX555AB1-2173
Microchip Technology Inc. MX555ABB200M000
Ordering Information
Ordering Part Number Marking Line 1 Marking Line 3 Shipping Package
MX555ABB200M000 MX555A BB2000 Tube 6-Pin 5mm x 3.2mm LGA
MX555ABB200M000-TR MX555A BB2000 Tape and Reel 6-Pin 5mm x 3.2mm LGA
Devices are Green and RoHS compliant. Sample material may have only a partial top mark.
Pin Configuration
OE
DNC
GND
VDD
/Q
Q
Pin Description
Pin Number Pin Name Pin Type Pin Level Pin Function
1 OE I, SE LVCMOS Output Enable, disables output to tri-state,
0 = Disabled, 1 = Enabled, 50k Ohms Pull-Up
2 DNC Make no connection, leave floating.
3 GND PWR Power Supply Ground
4, 5 Q, /Q O, Diff LVDS Clock Output Frequency = 200MHz
6 VDD PWR Power Supply
Environmental Specifications
Thermal Shock MIL-STD-883, Method 1011, Condition A
Moisture Resistance MIL-STD-883, Method 1004
Mechanical Shock MIL-STD-883, Method 2002, Condition C
Mechanical Vibration MIL-STD-883, Method 2007, Condition B
Resistance to Soldering Heat J-STD-020C, Table 5-2 Pb-free devices (except 2 cycles max)
Hazardous Substance Pb-Free / RoHS / Green Compliant
Solderability JESD22-B102-D Method 2 (Preconditioning E)
Terminal Strength MIL-STD-883, Method 2004, Test Condition D
Gross Leak MIL-STD-883, Method 1014, Condition C
Fine Leak MIL-STD-883, Method 1014, Condition A2, R1=2x10-8 atm cc/s
Solvent Resistance MIL-STD-202, Method 215
May 14, 2018 2 Revision 1.0
tcghelp@microchip.comMX555AB1-2173
Microchip Technology Inc. MX555ABB200M000
Package Information and Recommended Land Pattern for 6-Pin LGA³
6-Pin LGA (5x3.2mm)
Note:
3. Package information is correct as of the publication date. For updates and most current information, go to www.microchip.com.
Microchip Technology Inc. http://www.microchip.com
Microchip makes no representations or warranties with respect to the accuracy or completeness of the information furnished in this data sheet. This
information is not intended as a warranty and Microchip does not assume responsibility for its use. Microchip reserves the right to change circuitry,
specifications and descriptions at any time without notice. No license, whether express, implied, arising by estoppel or otherwise, to any
intellectual property rights is granted by this document. Except as provided in Microchip's terms and conditions of sale for such products, Microchip
assumes no liability whatsoever, and Microchip disclaims any express or implied warranty relating to the sale and/or use of Microchip products
including liability or warranties relating to fitness for a particular purpose, merchantability, or infringement of any patent, copyright or other
intellectual property right.
© 2018 Microchip Technology Inc.
May 14, 2018 5 Revision 1.0
tcghelp@microchip.comMX555AB1-2173
