MX555ABB200M000 Ultra-Low Jitter 200MHz LVDS XO ClockWorks(R) FUSION General Description Features The MX555ABB200M000 is an ultra-low phase jitter XO with LVDS output optimized for high line rate applications. * 200MHz LVDS * Typical phase noise: - 94fs (Integration range: 1.875MHz-20MHz) * 50ppm total frequency stability * -40C to +85C temperature range * Industry standard 6-Pin 5mm x 3.2mm LGA package Absolute Maximum Ratings Operating Ratings Supply Voltage (VIN)..................................................+4.6V Lead Temperature (soldering, 10s)..............................260C Case Temperature........................................................115C Storage Temperature (T )............................-65C to +125C S ESD Machine Model.....................................................200V ESD Rating (HBM).........................................................2kV Supply Voltage (VIN).......................+2.375V to +3.63V Ambient Temperature (TA)....................-40C to +85C Junction Thermal Resistance LGA (T ) Still Air.....................................58C/W JA Electrical Characteristics VDD = 2.375 - 3.63V, TA = -40C to +85C, outputs terminated with 100 Ohms between Q and /Q. Symbol Parameter IDD F0 Condition Typ. Max. Units Supply Current 90 100 mA Center Frequency 200 Frequency Stability Note 4 Oj Phase Noise Integration Range (12kHz to 20MHz) Integration Range (1.875MHz to 20MHz) Tstart Start-Up Time TR/TF Rise/Fall time Duty Cycle Min. MHz 50 140 94 ppm fsRMS 20 ms 100 400 ps 45 55 % VOH Output High Voltage VOH max = VCM max + 1/2 VOD max LVDS output levels 1.248 1.375 1.602 V VOL Output Low Voltage VOL min = VCM min - 1/2 VOD max LVDS output levels 0.898 1.025 1.252 V VOD Output Differential Voltage 247 350 454 mV VCM Common Mode Output Voltage 1.125 1.2 1.375 V Notes: 1. Exceeding the absolute maximum ratings may damage the device. 2. The device is not guaranteed to function outside its operating ratings. 3. Guaranteed after thermal equilibrium. 4. Inclusive of initial accuracy, temperature drift, aging, shock, vibration. ClockWorks is a registered trademark of Microchip Technology Inc. Microchip Technology Inc. May 14, 2018 MX555AB1-2173 http://www.microchip.com Revision 1.0 tcghelp@microchip.com Microchip Technology Inc. MX555ABB200M000 Ordering Information Ordering Part Number Marking Line 1 Marking Line 3 Shipping Package MX555ABB200M000 MX555A BB2000 Tube 6-Pin 5mm x 3.2mm LGA MX555ABB200M000-TR MX555A BB2000 Tape and Reel 6-Pin 5mm x 3.2mm LGA Devices are Green and RoHS compliant. Sample material may have only a partial top mark. Pin Configuration OE VDD DNC /Q GND Q Pin Description Pin Number Pin Name Pin Type Pin Level 1 OE I, SE LVCMOS 2 DNC 3 GND PWR 4, 5 Q, /Q O, Diff 6 VDD PWR Pin Function Output Enable, disables output to tri-state, 0 = Disabled, 1 = Enabled, 50k Ohms Pull-Up Make no connection, leave floating. Power Supply Ground LVDS Clock Output Frequency = 200MHz Power Supply Environmental Specifications Thermal Shock MIL-STD-883, Method 1011, Condition A Moisture Resistance MIL-STD-883, Method 1004 Mechanical Shock MIL-STD-883, Method 2002, Condition C Mechanical Vibration MIL-STD-883, Method 2007, Condition B Resistance to Soldering Heat J-STD-020C, Table 5-2 Pb-free devices (except 2 cycles max) Hazardous Substance Pb-Free / RoHS / Green Compliant Solderability JESD22-B102-D Method 2 (Preconditioning E) Terminal Strength MIL-STD-883, Method 2004, Test Condition D Gross Leak MIL-STD-883, Method 1014, Condition C Fine Leak MIL-STD-883, Method 1014, Condition A2, R1=2x10-8 atm cc/s Solvent Resistance MIL-STD-202, Method 215 May 14, 2018 MX555AB1-2173 2 Revision 1.0 tcghelp@microchip.com Microchip Technology Inc. MX555ABB200M000 Figure 1. LVDS Output 200MHz 1.875MHz-20MHz 94fs Figure 2. LVDS Output 200MHz 12kHz-20MHz 140fs May 14, 2018 MX555AB1-2173 3 Revision 1.0 tcghelp@microchip.com Microchip Technology Inc. MX555ABB200M000 Figure 3. E5001A Period Jitter @ 200MHz LVDS, RMS TJ: 239fs, Pk-Pk TJ: 2.08ps May 14, 2018 MX555AB1-2173 4 Revision 1.0 tcghelp@microchip.com Microchip Technology Inc. MX555ABB200M000 Package Information and Recommended Land Pattern for 6-Pin LGA 6-Pin LGA (5x3.2mm) Note: 3. Package information is correct as of the publication date. For updates and most current information, go to www.microchip.com. Microchip Technology Inc. http://www.microchip.com Microchip makes no representations or warranties with respect to the accuracy or completeness of the information furnished in this data sheet. This information is not intended as a warranty and Microchip does not assume responsibility for its use. Microchip reserves the right to change circuitry, specifications and descriptions at any time without notice. No license, whether express, implied, arising by estoppel or otherwise, to any intellectual property rights is granted by this document. Except as provided in Microchip's terms and conditions of sale for such products, Microchip assumes no liability whatsoever, and Microchip disclaims any express or implied warranty relating to the sale and/or use of Microchip products including liability or warranties relating to fitness for a particular purpose, merchantability, or infringement of any patent, copyright or other intellectual property right. (c) 2018 Microchip Technology Inc. May 14, 2018 MX555AB1-2173 5 Revision 1.0 tcghelp@microchip.com