Identifying Miscellaneous Labels Rite-On(R) Markers HellermannTyton's Rite-On Markers are made from a flexible vinyl film and are used to mark wire and cable. The selflaminating labels have a clear tail which seals the legend under clear vinyl, maintaining the quality of the labels. The RiteOn markers are packaged in a reuseable dispenser made from high impact plastic which is resistant to oils and grease. Product Features - Easily and conveniently fits in a pants or shirt pocket. - Once loaded, unit allows minimal label exposure to dust and moisture. - Can be used with standard ball point pens or HellermannTyton nylon marking pens. - Excess liner is easily cut-off by tearing it over the edge guide at the front of the unit. - The dispenser can be reloaded over and over again, making it a cost-effective and efficient method of labeling. A special label window holds Can be held easily in the Label dispenses automatically the label firm for easy palm of the hand to provide when the liner is pulled from marking. a flat writing surface. the front of the unit. Self-Laminating Labels and Dispenser Product Selection Article No. Part No. Type Width in. (mm) Height of Write-On Area in. (mm) Height of Label in. (mm) Wire Size Min. Wire Markers Range (AWG) Size (in) per Roll 590-01010 RO101 RO101 .75 (19.05) .875 (22.22) 6.0 (152.40) 4/0 on up .70 40 1 roll 590-01750 RO175 RO175 .75 (19.05) .75 (19.05) 3.0 (76.2) 4 to 4/0 .330 90 1 roll 590-05120 RO512 RO512 .75 (19.05) .50 (12.7) 1.875 (47.62) 8 to 4 AWG .263 150 1 roll 590-05140 RO514 RO514 .75 (19.05) .375 (9.52) 1.25 (31.75) 14 to 8 AWG .053 200 1 roll 590-10000 RO175WP RO175WP .75 (19.05) .75 (19.05) 3.0 (76.2) 4 to 4/0 .330 90 1 roll Dimensions are approximate and subject to technical changes. Use Part No. for ordering and Type for specification purposes. 178 Pkg. Qty. w w w . h e l l e r m a n n . t y t o n . c o m | 1 - 8 0 0 - 5 3 7 - 1 5 1 2 Identifying Miscellaneous Labels Rite-On(R) Markers continued Refill Rolls Product Selection Article No. Part No. Type Width Height of Write-On Area Height of Label in. (mm) in. (mm) in. (mm) Markers per Roll Pkg. Qty. 590-01011 101REF 101REF .75 (19.05) .875 (22.22) 6.0 (152.4) 40 1 roll 590-01751 175REF 175REF .75 (19.05) .75 (19.05) 3.0 (76.2) 40 1 roll 590-05121 512REF 512REF .75 (19.05) .50 (12.7) 1.875 (47.62) 40 1 roll 590-05141 514REF 514REF .75 (19.05) .375 (9.52) 1.25 (31.75) 40 1 roll Dimensions are approximate and subject to technical changes. Use Part No. for ordering and Type for specification purposes. Nylon Marking Pens When used with a non-smear FTP nylon marking pen, marking is fast and economical. Product Selection Article No. Type Color 500-50822 T82-R Part No. T82R-RD Red Pkg. Qty. 2 pens 500-50820 T82-S T82S-BK Black 2 pens Use Part No. for ordering and Type for specification purposes. Rite-On Marker Display The Rite-On Marker point-of-purchase display helps ensure increased sales of this economical and popular labeling method. Product Selection Article No. 590-00000 Part No. RODISPLAY Type Description Pkg. Qty. RODISPLAY Each display contains: - 12 dispensers (3 each of RO101, RO175, RO512 & RO514) - 6 starter packs (each pack contains an RO175 dispenser, a roll of labels, a pen and directions for use) - 16 refill rolls (4 each of the refill labels for each dispenser, 101REF, 175REF, 512REF & 514REF) - 1 wire stand display and header label. 1 Use Part No. for ordering and Type for specification purposes. w w w . h e l l e r m a n n . t y t o n . c o m | 1 - 8 0 0 - 5 3 7 - 1 5 1 2 179 Identifying Miscellaneous Labels Wire Marker Tape The wire marker tape dispenser provides a convenient, economical system for wire marking. HellermannTyton's wire marker tape features sharp, crisp legends which are coated to resist smearing and abrasion. It is provided on a carrier strip to prevent contamination of the adhesive prior to installation, assuring permanent, non-flagging marker ends. Material Data Material Dimensions Markers per Roll Adhesive Tyvek - a polyolefin material that resists tearing and abrasion .25 W x 1.25 L 76 each legend Aggressive acrylic base Product Selection Article No. Part No. Type Description Pkg. Qty. 598-00256 WMTD0-9 WMTD0-9 Single box of wire marker tape refill. Each box contains 76 markers of each legend 0-9 and is use to refill the empty tape dispenser. 1 Dispenser 598-00257 WMTDM WMTDM Wire marker tape dispenser merchandiser. Each merchandiser contains 10 dispensers. Each dispenser contains 76 markers of each legend 0-9. 1 Merchandiser 598-00258 WMTM WMTM Wire marker tape refill merchandiser. Each merchandiser contains 10 boxes of 76 markers each of legend 0-9 and 10 boxes of 760 markers of one legend 0 -9. Single legend boxes have 10 rolls (76 markers each roll) of a single legend. 1 Merchandiser 598-00259 WMT0-9 WMT0-9 One wire marker tape dispenser with 10 rolls of 76 markers per roll, of each legend 0-9. 1 Refill Use Part No. for ordering and Type for specification purposes. 180 w w w . h e l l e r m a n n . t y t o n . c o m | 1 - 8 0 0 - 5 3 7 - 1 5 1 2 Identifying Miscellaneous Labels Handi-Cards HellermannTyton Handi-Cards are easy release markers on a plastic card. They feature a strong adhesive which assures a long lasting bond on wire. Permanent, pre-printed legends are available in solid or sequence order. HANDI-CARD LEGENDS Handi-Card legends listed below are also available with a lead time of 3-4 weeks. These legends require a one box minimum. Solid Sequence card TYHC* -- 0 thru 999 -- A thru Z Legends listed below come one per box (ex: A1). A1, A2, A3, A4, A5, A6 B1...B6 C1...C6 D1...D6 E1...E6 F1...F6 G1...G4 H1...H6 J1...J4 K1...K4 L1...L6 M1...M6 P1...P4 Material Data R1...R5 S1...S5 T1...T10 X1...X4 Y1... Y4 Z1...Z4 *Each legend to be ordered separately. Example: To order a box of A3, order TYHCA3. Please contact HellermannTyton for more details. Material Adhesion to Steel Operating Temperature Vinyl Cloth (TYHC) 40oz/in. of width -40 F to +250 F (-40 C to +121 C) Solid Handi-Cards Each marker on the card contains the same legend. Voltage Solid Handi-Cards -- 0-9 2 characters - 36 markers per card 3-4 characters - 25 markers per card 3V 6V 12V 24V 110V 115V 120V 125V 220V 230V 240V 270V FM FWD GEN GND HOT IGN IN LINE PHASE PHASE A PHASE B PHASE C 280V 440V 460V 480V AC ALI AM ANT ARM BAT BB BELL POS PRI SEC SIC SPARE 1PHASE 2 PHASE 3 PHASE A+ AB+ B- Product Selection BUS CAP CC CM COM CT CUR CW DC DD FF C+ C+ LOAD LOW MED NEG OFF ON OUT Handi-Card Number Article No. Part No. Type Labels per Sheet Pkg. Qty. 0 598-00007 TYHC0 TYHC0 36 1 598-00019 TYHC1 TYHC1 36 25 cards 25 cards 2 598-00022 TYHC2 TYHC2 36 25 cards 3 598-00023 TYHC3 TYHC3 36 25 cards 4 598-00024 TYHC4 TYHC4 36 25 cards 5 598-00025 TYHC5 TYHC5 36 25 cards Colors: RD= Red, YL=Yellow, LB= Light Blue, DB= Dark Blue, LG= Light Green, DG= Dark Green, BR= Brown, OR= Orange, PK= Pink, GY= Gray, BK= Black, WH= White 6 598-00027 TYHC6 TYHC6 36 25 cards 7 598-00028 TYHC7 TYHC7 36 25 cards Machine 8 598-00029 TYHC8 TYHC8 36 25 cards 9 598-00030 TYHC9 TYHC9 36 25 cards Legends listed below come one per box (Ex:1T1). 1T1, 1T2, 1T3 2T1...2T3 3T1...3T3 4T1...4T3 5T1...5T3 6T1...6T3 7T1...7T3 8T1...8T3 9T1...9T3 10T1...10T3 11T1...11T3 12T1...12T3 13T1...13T3 14T1...14T3 15T1...15T3 1L1...1L3 2L1...2L3 3L1...3L3 4L1...4L3 5L1...5L3 6L1...6L3 Sequence Repeated 1-3 1-5 1-6 1-9 0-9 0-10 1-12 1-16 Use Part No. for ordering and Type for specification purposes. Product Selection Other Available Handi-Cards 17-32 1-18 19-36 A-E F-J K-O P-T U-Z 1T-3T3 4T1-6T3 7T1-9T3 1L1-3L3 A1-A4 F1-F4 H1-H9 Part No. Labels per Sheet Pkg. Qty. TYHC0,1,2,thru 99 36 25 cards Solid Handi-Cards - Each TYHC100 marker on the same card contains the same legend. TYHCA,B,C, thru Z To order, use TYHC prefix plus TYHCL1,L2,or L3 the legend (number or letter). TYHCT1, T2, or T3 Sequence Handi-Cards Each marker on the card contains a different number or letter. It runs in sequence beginning with the lowest number or letter first, and ending with the highest. w w w . h e l l e r m a n n . t y t o n . c o m | 25 25 cards 36 25 cards 36 25 cards 36 25 cards TYHC1-33 33 25 cards TYHC34-66 33 25 cards TYHC67-99 33 25 cards TYHCA-Z 36 25 cards 1 - 8 0 0 - 5 3 7 - 1 5 1 2 181 Identifying Miscellaneous Labels Handi-Paks Convenient pocket sized booklets. Black non-smear legends on a white background. Plastic coated cloth material remains flexible. Strong adhesive assures firm bond on wire. Material Data Material Adhesion to Steel Operating Temperature Vinyl Cloth (TYHC) 40oz/in. of width -40 F to +250 F (-40 C to +121 C) Product Selection Article No. Part No. Type Description Pkg. Qty. 598-00260 TCWM1 TCWM1 45 markers each of legends 0-9 1 booklet 598-00261 TCWM2 TCWM2 10 markers each of A-Z, 1-15, +, -, / 1 booklet 598-00262 TCWM3 TCWM3 10 markers each 1-45 1 booklet 598-00263 TCWM4 TCWM4 150 markers each 1,2,3 1 booklet 598-00264 TCWM5 TCWM5 150 markers each A,B, and C. 1 booklet 598-00265 TCWM6 TCWM6 150 markers each T1, T2 and T3 1 booklet 598-00266 TCWM7 TCWM7 150 markers each L1, L2 and L3 1 booklet 598-00267 TCWM8 TCWM8 6 markers each 1-15, 4 markers each 16-90 and 2 markers each of A-Z, +, -, / 1 booklet 598-00268 TCWM9 TCWM9 45 markers each of 1,2,3,A,B,C, 30 markers each of L1, L2 and L3 and 30 markers each of T1, T2 and T3 1 booklet 598-00269 TCWM10 TCWM10 45 markers each of 10 NEMA colors. 1 booklet 598-00270 TCWM11 TCWM11 15 markers each of 1-30 1 booklet 598-00271 TCWM12 TCWM12 15 markers each of A-Z, 21 markers blank, 8 markers +, and 7 markers -. 1 booklet 598-00272 TCWM13 TCWM13 45 markers each of +, -, AC, DC, 33 markers each of POS, NEG and GND. 27 markers of NEUT and 21 markers of SPARE and BLANK. 1 booklet 598-00273 TCWM14 TCWM14 45 markers each of 0-9, 15 markers each of L1, L2, L3 and 15 markers each of T1, T2 and T3. 1 booklet 598-00274 TCWM15 TCWM15 10 markers each of 46-90. 1 booklet 598-00275 TCWM16 TCWM16 10 markers each of 1-33, A, B, C, +, -, T1, T2, T3, L1, L2 and L3. 1 booklet Use Part No. for ordering and Type for specification purposes. 182 w w w . h e l l e r m a n n . t y t o n . c o m | 1 - 8 0 0 - 5 3 7 - 1 5 1 2 Identifying Miscellaneous Labels HELASIGN(R) Self Laminating Booklet HELASIGN self-laminating label booklets come in 6 different colors and are very easy to use. The booklet conveniently fits in a pocket, while protecting the labels from dust prior to use. The self-laminating label's clear "tail" wraps around the text for excellent abrasion and moisture resistance and protection from dust and dirt. Available in three sizes, the HELASIGN accommodates cable diameters from .16" - .67". Product Selection Article No. Part No. Type Color Width in. (mm) Height of Write-On Area Height of Label Wire Size in. (mm) in. (mm) Range (AWG) Labels per booklet Pkg. Qty. Width - 0.5 598-94920 598-94920 HSMB-C1-120 White .5 (12.7) .5 (12.7) 1.5 (38.1) 8-14 240 1 booklet 598-94220 598-94220 HSMB-C1-120 Red .5 (12.7) .5 (12.7) 1.5 (38.1) 8-14 240 1 booklet 598-94320 598-94320 HSMB-C1-120 Orange .5 (12.7) .5 (12.7) 1.5 (38.1) 8-14 240 1 booklet 598-94420 598-94420 HSMB-C1-120 Yellow .5 (12.7) .5 (12.7) 1.5 (38.1) 8-14 240 1 booklet 598-94520 598-94520 HSMB-C1-120 Green .5 (12.7) .5 (12.7) 1.5 (38.1) 8-14 240 1 booklet 598-94620 598-94620 HSMB-C1-120 Blue .5 (12.7) .5 (12.7) 1.5 (38.1) 8-14 240 1 booklet Width - 0.75 598-95920 598-95920 HSMB-C2-120 White .75 (19.1) .5 (12.7) 2.0 (50.8) 2-10 120 1 booklet 598-95220 598-95220 HSMB-C2-120 Red .75 (19.1) .5 (12.7) 2.0 (50.8) 2-10 120 1 booklet 598-95320 598-95320 HSMB-C2-120 Orange .75 (19.1) .5 (12.7) 2.0 (50.8) 2-10 120 1 booklet 598-95420 598-95420 HSMB-C2-120 Yellow .75 (19.1) .5 (12.7) 2.0 (50.8) 2-10 120 1 booklet 598-95520 598-95520 HSMB-C2-120 Green .75 (19.1) .5 (12.7) 2.0 (50.8) 2-10 120 1 booklet 598-95620 598-95620 HSMB-C2-120 Blue .75 (19.1) .5 (12.7) 2.0 (50.8) 2-10 120 1 booklet Width - 1.0 598-96920 598-96920 HSMB-C3-120 White 1.0 (25.4) .75 (19.1) 3.0 (76.2) 6-0000 60 1 booklet 598-96220 598-96220 HSMB-C3-120 Red 1.0 (25.4) .75 (19.1) 3.0 (76.2) 6-0000 60 1 booklet 598-96320 598-96320 HSMB-C3-120 Orange 1.0 (25.4) .75 (19.1) 3.0 (76.2) 6-0000 60 1 booklet 598-96420 598-96420 HSMB-C3-120 Yellow 1.0 (25.4) .75 (19.1) 3.0 (76.2) 6-0000 60 1 booklet 598-96520 598-96520 HSMB-C3-120 Green 1.0 (25.4) .75 (19.1) 3.0 (76.2) 6-0000 60 1 booklet 598-96620 598-96620 HSMB-C3-120 Blue 1.0 (25.4) .75 (19.1) 3.0 (76.2) 6-0000 60 1 booklet Dimensions are approximate and subject to technical changes. Use Part No. for ordering and Type for specification purposes. w w w . h e l l e r m a n n . t y t o n . c o m | 1 - 8 0 0 - 5 3 7 - 1 5 1 2 183 Identifying Miscellaneous Labels WIC(R) Markers WIC(R) markers permanently and rapidly mark wires. Now, it's simple to change identification on wires which are already marked. This range of clip-on markers is specially designed for use after wire termination has been completed. The unique gripping profile is designed to ensure that clip remains in place under normal and vibration working conditions. The deeply stamped mark, black print on yellow provide high legibility. The interlocking device ensures perfect alignment of multi-mark legends. A high grade of material guarantees good mechanical properties and chemical resistance against cleaning agents, oils and fuels. Only 3 sizes of markers are needed for identifying wire crosssections ranging from an outside cable diameter of .75 - .208 (2.0 to 5.3mm). WIC is an open marker, open markers can be applied to pre-terminated wire and cable. Use the re-fillable applicator to easily apply and position the markers during installation. Packaging The pocket size dispensers of 200 markers (W1 and W2) and 100 markers (W3) adapted for use on site and easy stored. Customized compositions or special characters on request. WIC Markers Refillable Applicator Wire Grips Color Coded Applicators Yes * * The convenient WIC dispenser ideal for pocket or toolbox storage. WIC is an open marker. Open markers can be applied to preterminated wire and cable. Use the re-fillable applicator to easily apply and position the markers during installation. No Expandandable I.D. for a range of wire sizes * Open Wire grips to secure the markers to the wire Product Data Label Material Material W2 W3 Polyamide 6 Polyamide 6 Polyamide 6 Yellow/ Black Print Yellow/ Black Print Yellow/ Black Print -40F to +185F, intermittent 221F (-40C to +85C, intermittent 105C) -40F to +185F, intermittent 221F (-40C to +85C, intermittent 105C) -40F to +185F, intermittent 221F (-40C to +85C, intermittent 105C) Self-extinguishing UL94VO - base material Self-extinguishing UL94VO - base material Self-extinguishing UL94VO - base material Approvals ICE 304, EN 60062, UL94 ICE 304, EN 60062, UL94 ICE 304, EN 60062, UL94 Cable Range - in. (mm) 2.0 - 2.8 (50.8 - 71.12) 2.8 to 3.8 (71.12 - 96.52) 4.3 to 5.3 (109.22 - 134.62) Nominal Wire Cross Section - in. (mm) 0.5 to 1.5 (12.7 - 38.1) 1.5 to 2.5 (38.1 - 63.5) 4 to 6 (101.6 - 152.4) AWG 20 to 18 16 to 14 10 to 8 Width (W) - in. (mm) .19 (5) .22 (5.6) .31 (8.0) Height (H) - in. (mm) .25 (6.4) .28 (7.1) .38 (9.6) Length (L) - in. (mm) Color Temperature Range Flammability 184 W1 .12 (3.0) .12 (3.0) .12 (3.0) Markers per Strip 20 20 10 Package Quantity 200 200 100 w w w . h e l l e r m a n n . t y t o n . c o m | 1 - 8 0 0 - 5 3 7 - 1 5 1 2 Identifying Miscellaneous Labels WIC(R) Markers continued Product Selection Wire Size Legend 20-18 Gauge Wire Wire O.D. in. (mm) .075 - 0.110 (2-2.8) 16 -14 Gauge Wire Wire O.D. in. (mm) .110 - 0.149 (2.8-3.8) 10-8 Gauge Wire Wire O.D. in. (mm) .169 - 0.208 (4.3-5.3) Article No. Part No. 561-01604 561-01604 WIC1-0 Type Pkg. Qty. 200 561-01614 561-01614 WIC1-1 200 561-01624 561-01624 WIC1-2 200 561-01634 561-01634 WIC1-3 200 561-01644 561-01644 WIC1-4 200 561-01654 561-01654 WIC1-5 200 561-01664 561-01664 WIC1-6 200 561-01674 561-01674 WIC1-7 200 561-01684 561-01684 WIC1-8 200 561-01694 561-01694 WIC1-9 200 561-02604 561-02604 WIC2-0 200 561-02614 561-02614 WIC2-1 200 561-02624 561-02624 WIC2-2 200 561-02634 561-02634 WIC2-3 200 561-02644 561-02644 WIC2-4 200 561-02654 561-02654 WIC2-5 200 561-02664 561-02664 WIC2-6 200 561-02674 561-02674 WIC2-7 200 561-02684 561-02684 WIC2-8 200 561-02694 561-02694 WIC2-9 200 561-03604 561-03604 WIC3-0 100 561-03614 561-03614 WIC3-1 100 561-03624 561-03624 WIC3-2 100 561-03634 561-03634 WIC3-3 100 561-03644 561-03644 WIC3-4 100 561-03654 561-03654 WIC3-5 100 561-03664 561-03664 WIC3-6 100 561-03674 561-03674 WIC3-7 100 561-03684 561-03684 WIC3-8 100 561-03694 561-03694 WIC3-9 100 Use Part No. for ordering and Type for specification purposes. WIC Markers are also available in A-Z upon request, please contact HellermannTyton for details. WICTOOL Applicator WICTOOL easily applies WIC markers to wire. The unique design of curved head and push out system makes this applicator very easy to use and perfectly adapted to WIC markers. WICTOOL must be ordered separate from WIC markers. Product Selection Article No. Part No. 561-00001 561-00001 Type Pkg. Qty. WIC TOOL 5 w w w . h e l l e r m a n n . t y t o n . c o m | 1 - 8 0 0 - 5 3 7 - 1 5 1 2 185 Identifying Miscellaneous Labels Clip-Tags Clip-Tags are snap-on markers which slip easily on wire and cable. The markers are non-adhesive and come on a wand for trouble free installation. Clip-Tags are applied by placing the flared end of the wand over the wire, then pushing the marker over the flare to the wire. The interlocking design of these markers keep them aligned and readable. Clip-Tags are used on pre-terminated wires, pre-installed wires, and terminal blocks. They work well for electrical installations and in panel and wire harness shops. Each legend is printed black on a white marker. Each wand contains 30 markers and each package contains 10 wands. Part Number Example WC1 Size A Legend Clip-Tags are open markers. Open markers can be applied to preterminated wire and cable. Clip-Tags have the lowest profile when applied to a wire. Available standard legends include: 0-9, A to Z. One legend per package. For example, WC1-A equals 300 Clip-Tag markers in legend "A." Clip Tags Refillable Applicator Wire Grips Color Coded Applicators Low Profile Yes * No * Open * Expandable within wire range. * Product Selection Wire Size Legend 22 Gauge Wire Brown Applicator 18 Gauge Wire Gray Applicator Article No. Part No. Type Min. Outside O in. (mm) Max. Outside O in. (mm) Length (L) in. (mm) 560-10526 WC1-0 WC1 .039 (1.0) .055 (1.4) .087 (2.21) 300 1 560-10527 WC1-1 WC1 .039 (1.0) .055 (1.4) .087 (2.21) 300 2 560-10528 WC1-2 WC1 .039 (1.0) .055 (1.4) .087 (2.21) 300 3 560-10529 WC1-3 WC1 .039 (1.0) .055 (1.4) .087 (2.21) 300 4 560-10530 WC1-4 WC1 .039 (1.0) .055 (1.4) .087 (2.21) 300 5 560-10531 WC1-5 WC1 .039 (1.0) .055 (1.4) .087 (2.21) 300 6 560-10532 WC1-6 WC1 .039 (1.0) .055 (1.4) .087 (2.21) 300 7 560-10533 WC1-7 WC1 .039 (1.0) .055 (1.4) .087 (2.21) 300 8 560-10534 WC1-8 WC1 .039 (1.0) .055 (1.4) .087 (2.21) 300 9 560-10535 WC1-9 WC1 .039 (1.0) .055 (1.4) .087 (2.21) 300 0 560-10126 WC2-0 WC2 .055 (1.4) .071 (1.8) .091 (2.33) 300 1 560-10127 WC2-1 WC2 .055 (1.4) .071 (1.8) .091 (2.33) 300 2 560-10128 WC2-2 WC2 .055 (1.4) .071 (1.8) .091 (2.33) 300 3 560-10129 WC2-3 WC2 .055 (1.4) .071 (1.8) .091 (2.33) 300 4 560-10130 WC2-4 WC2 .055 (1.4) .071 (1.8) .091 (2.33) 300 5 560-10131 WC2-5 WC2 .055 (1.4) .071 (1.8) .091 (2.33) 300 6 560-10132 WC2-6 WC2 .055 (1.4) .071 (1.8) .091 (2.33) 300 7 560-10133 WC2-7 WC2 .055 (1.4) .071 (1.8) .091 (2.33) 300 8 560-10134 WC2-8 WC2 .055 (1.4) .071 (1.8) .091 (2.33) 300 9 560-10135 WC2-9 WC2 .055 (1.4) .071 (1.8) .091 (2.33) 300 Dimensions are approximate and subject to technical changes. Use Part No. for ordering and Type for specification purposes. 186 Pkg. Qty. 0 w w w . h e l l e r m a n n . t y t o n . c o m | 1 - 8 0 0 - 5 3 7 - 1 5 1 2 Identifying Miscellaneous Labels Clip-Tags continued Product Selection Wire Size Legend 16 Gauge Wire Red Applicator 16-10 Gauge Wire Blue Applicator 10 Gauge Wire Yellow Applicator Part No. Type Min. Outside O in. (mm) Max. Outside O in. (mm) Length (L) in. (mm) Pkg. Qty. 560-10226 WC3-0 WC3 .075 (1.9) .104 (2.65) .125 (3.19) 300 1 560-10227 WC3-1 WC3 .075 (1.9) .104 (2.65) .125 (3.19) 300 2 560-10228 WC3-2 WC3 .075 (1.9) .104 (2.65) .125 (3.19) 300 3 560-10229 WC3-3 WC3 .075 (1.9) .104 (2.65) .125 (3.19) 300 4 560-10230 WC3-4 WC3 .075 (1.9) .104 (2.65) .125 (3.19) 300 5 560-10231 WC3-5 WC3 .075 (1.9) .104 (2.65) .125 (3.19) 300 6 560-10232 WC3-6 WC3 .075 (1.9) .104 (2.65) .125 (3.19) 300 300 0 18-16 Gauge Wire Green Applicator Article No. 7 560-10233 WC3-7 WC3 .075 (1.9) .104 (2.65) .125 (3.19) 8 560-10234 WC3-8 WC3 .075 (1.9) .104 (2.65) .125 (3.19) 300 9 560-10235 WC3-9 WC3 .075 (1.9) .104 (2.65) .125 (3.19) 300 0 560-10326 WC6-0 WC6 .102 (2.6) .138 (3.5) .127 (3.25) 300 1 560-10327 WC6-1 WC6 .102 (2.6) .138 (3.5) .127 (3.25) 300 2 560-10328 WC6-2 WC6 .102 (2.6) .138 (3.5) .127 (3.25) 300 3 560-10329 WC6-3 WC6 .102 (2.6) .138 (3.5) .127 (3.25) 300 4 560-10330 WC6-4 WC6 .102 (2.6) .138 (3.5) .127 (3.25) 300 5 560-10331 WC6-5 WC6 .102 (2.6) .138 (3.5) .127 (3.25) 300 6 560-10332 WC6-6 WC6 .102 (2.6) .138 (3.5) .127 (3.25) 300 7 560-10333 WC6-7 WC6 .102 (2.6) .138 (3.5) .127 (3.25) 300 8 560-10334 WC6-8 WC6 .102 (2.6) .138 (3.5) .127 (3.25) 300 9 560-10335 WC6-9 WC6 .102 (2.6) .138 (3.5) .127 (3.25) 300 0 560-10426 WC9-0 WC9 .128 (3.25) .177 (4.5) .131 (3.35) 300 1 560-10427 WC9-1 WC9 .128 (3.25) .177 (4.5) .131 (3.35) 300 2 560-10428 WC9-2 WC9 .128 (3.25) .177 (4.5) .131 (3.35) 300 3 560-10429 WC9-3 WC9 .128 (3.25) .177 (4.5) .131 (3.35) 300 4 560-10430 WC9-4 WC9 .128 (3.25) .177 (4.5) .131 (3.35) 300 5 560-10431 WC9-5 WC9 .128 (3.25) .177 (4.5) .131 (3.35) 300 6 560-10432 WC9-6 WC9 .128 (3.25) .177 (4.5) .131 (3.35) 300 7 560-10433 Wc9-7 WC9 .128 (3.25) .177 (4.5) .131 (3.35) 300 8 560-10434 WC9-8 WC9 .128 (3.25) .177 (4.5) .131 (3.35) 300 9 560-10435 WC9-9 WC9 .128 (3.25) .177 (4.5) .131 (3.35) 300 0 560-10026 WC12-0 WC12 .177 (4.4) .236 (6.0) .139 (3.54) 300 1 560-10027 WC12-1 WC12 .177 (4.4) .236 (6.0) .139 (3.54) 300 2 560-10028 WC12-2 WC12 .177 (4.4) .236 (6.0) .139 (3.54) 300 3 560-10029 WC12-3 WC12 .177 (4.4) .236 (6.0) .139 (3.54) 300 4 560-10030 WC12-4 WC12 .177 (4.4) .236 (6.0) .139 (3.54) 300 5 560-10031 WC12-5 WC12 .177 (4.4) .236 (6.0) .139 (3.54) 300 6 560-10032 WC12-6 WC12 .177 (4.4) .236 (6.0) .139 (3.54) 300 7 560-10033 WC12-7 WC12 .177 (4.4) .236 (6.0) .139 (3.54) 300 8 560-10034 WC12-8 WC12 .177 (4.4) .236 (6.0) .139 (3.54) 300 9 560-10035 WC12-9 WC12 .177 (4.4) .236 (6.0) .139 (3.54) 300 Dimensions are approximate and subject to technical changes. Use Part No. for ordering and Type for specification purposes. w w w . h e l l e r m a n n . t y t o n . c o m | 1 - 8 0 0 - 5 3 7 - 1 5 1 2 187 Identifying Miscellaneous Labels Helagrip 2000 Cable Markers HellermannTyton Helagrip 2000 cable markers are designed for wire and cable marking in tough environments. Made of PVC (Polyvinylchloride), Helagrip features include easy application, chevron shape to ensure a positive lock onto the next marker, plastic reels color coded for size, and exceptional legibility. Helagrips also take up less space on the cable than other markers. The profile of the marker is designed to hug the wire and fit to various sizes of cable. Handy applicator tools are available for easy placement of markers on the wire. Chevron cut ensures positive locking of each marker to another marker. Part Number Example - MHG1-3WE 2 MHG1-3 WE Type 2 Color (white) Legend Helagrips are available in white. For colors, contact HellermannTyton. M = Marked Sleeve HG = Helagrip 1-3 = Size in mm WE = White 2= Legend To order - select type, then add WE (for white) and select legend from standard markings. Helagrip rolls are offered in white. They are also available in yellow depending upon volume requirements. Product Data Min. Outside O in. (mm) Max. Outside O in. (mm) Tool Roll Size .047 (1.2) .078 (2.0) .137 (3.5) TJC00 1000 MHG1-3 .03 (1.0) .118 (3.0) .137 (3.5) TJC1-3 1000 MHG2-5 .078 (2.0) .196 (5.0) .137 (3.5) TJC2-5 1000 Type MHG00 Length (L) in. (mm) MHG3-7 .118 (3.0) .275 (7.0) .137 (3.5) TJC3-7 500 MHG4-9 .157 (4.0) .354 (9.0) .196 (5.0) TJC4-9 250 Standard Markings A, B, C, ...Z; 0, 1, 2, 3...9; +, -, /, earth symbol Marker length tolerance for 00 to 3-7 is +0.00 mm to -0.10 mm. Dimensions are approximate and subject to technical changes. Material Data Material Helagrip is a closed marker with the greatest wire range flexibility. Closed markers are applied to wire and cable prior to termination for the best mark performance and security. Temperature Range Chemical Resistance Approval PVC Polyvinylchloride -85F to +221 (-65C to 105C) Good resistance to acid, aromatic fuel, vegetable oils, alkalis UL224, IEC 684-3-116, BS6746C Product Data Width ( W) - in. (mm) Helagrip Size Nominal Min. Height (H) - in. (mm) Max. Nominal Min. Max. Height (H2) in. (mm) Height (H3) in. (mm) Height (H4) in. (mm) 0.019 (.0.5) MHG00 0.137 (3.5) 0.098 (2.5) 0.177 (4.5) 0.114 (2.9) 0.11 (2.8) 0.118 (3.0) 0.027 (0.7) 0.031 (0.8) MHG1-3 0.127 (3.25) 0.125(3.15) 0.131 (3.35) 0.137 (3.5) 0.134 (3.4) 0.141 (3.6) 0.019 (0.5) 0.035 (0.9) 0.015 (0.4) MHG2-5 0.165 (4.2) 0.161 (4.1) 0.169 (4.3) 0.188 (4.8) 0.185 (4.7) 0.192 (4.9) 0.031 (0.8) 0.07 (1.8) 0.015 (0.4) MHG3-7 0.228 (5.8) 0.224 (5.7) 0.232 (5.9) 0.255 (6.5) 0.250 (6.4) 0.259 (6.6) 0.033 (0.85) 0.11 (2.8) 0.023 (0.6) MHG4-9 0.267 (6.8) 0.259 (6.6) 0.275 (7.0) 0.346 (8.8) 0.338 (8.6) 0.354 (9.0) 0.039 (1.0) 0.149 (3.8) 0.023 (0.6) Dimensions are approximate and subject to technical changes. Use Part No. for ordering and Type for specification purposes. 190 w w w . h e l l e r m a n n . t y t o n . c o m | 1 - 8 0 0 - 5 3 7 - 1 5 1 2 Identifying Miscellaneous Labels Helagrip 2000 Cable Markers continued HELAGRIP 2000 Cassettes Each cassette is complete with a teflon applicator and 25 of each of the following markers: - 0-9 (inc.) color coded. - A, E, L, N, R, S, T, +, -, Earth black on white - The MHG1-3CASS cassette has an additional strip of each of the numbers 0, 1, 2, 3. - Size MHG1-3CASS cable diameter range .04" to .12" (1 to 3 mm). - Size MHG2-5CASS cable diameter range .08" to .2" (2 to 5 mm). Color code is special order. Non-stock item. Product Selection Article No. Part No. 518-05013 518-05025 Min. Outside O in. (mm) Max. Outside O in. (mm) Type Description MHG1-3CASS Helagrip Set 1-3 Helagrip 2000 Cassette .03 (1.3) .118 (2.8) Pkg. Qty. 1 MHG2-5CASS Helagrip Set 2-5 Helagrip 2000 Cassette .078 (2.0) .196 (5.0) 1 Dimensions are approximate and subject to technical changes. Use Part No. for ordering and Type for specification purposes. Handy applicator tools are available for easy placement of markers on the wire. The profile of the marker is designed to hug the wire and fit to various sizes of cable. w w w . h e l l e r m a n n . t y t o n . c o m | 1 - 8 0 0 - 5 3 7 - 1 5 1 2 191 Identifying Miscellaneous Labels Helagrip 2000 Cable Marker Rolls Black on White, 0-9 Helagrips Product Selection Wire Size 18-14 Gauge Wire 17-12 Gauge Wire 14-16 Gauge Wire 12-2 Gauge Wire 10-2/0 Gauge Wire Legend Article No. Part No. Type Min. Outside O in. (mm) Max. Outside O in. (mm) Length (L) in. (mm) 515-00279 MHG00WE0 HGDC00 .047 (1.2) .078 (2.0) .137 (3.5) 1000 1 515-00289 MHG00WE1 HGDC00 .047 (1.2) .078 (2.0) .137 (3.5) 1000 2 515-00299 MHG00WE2 HGDC00 .047 (1.2) .078 (2.0) .137 (3.5) 1000 3 515-00309 MHG00WE3 HGDC00 .047 (1.2) .078 (2.0) .137 (3.5) 1000 4 515-00319 MHG00WE4 HGDC00 .047 (1.2) .078 (2.0) .137 (3.5) 1000 5 515-00329 MHG00WE5 HGDC00 .047 (1.2) .078 (2.0) .137 (3.5) 1000 6 515-00339 MHG00WE6 HGDC00 .047 (1.2) .078 (2.0) .137 (3.5) 1000 7 515-00349 MHG00WE7 HGDC00 .047 (1.2) .078 (2.0) .137 (3.5) 1000 8 515-00359 MHG00WE8 HGDC00 .047 (1.2) .078 (2.0) .137 (3.5) 1000 9 515-00369 MHG00WE9 HGDC00 .047 (1.2) .078 (2.0) .137 (3.5) 1000 0 515-01279 MHG1-3WE0 HGDC1-3 .03 (1.0) .118 (3.0) .137 (3.5) 1000 1 515-01289 MHG1-3WE1 HGDC1-3 .03 (1.0) .118 (3.0) .137 (3.5) 1000 2 515-01299 MHG1-3WE2 HGDC1-3 .03 (1.0) .118 (3.0) .137 (3.5) 1000 3 515-01309 MHG1-3WE3 HGDC1-3 .03 (1.0) .118 (3.0) .137 (3.5) 1000 4 515-01319 MHG1-3WE4 HGDC1-3 .03 (1.0) .118 (3.0) .137 (3.5) 1000 5 515-01329 MHG1-3WE5 HGDC1-3 .03 (1.0) .118 (3.0) .137 (3.5) 1000 6 515-01339 MHG1-3WE6 HGDC1-3 .03 (1.0) .118 (3.0) .137 (3.5) 1000 7 515-01349 MHG1-3WE7 HGDC1-3 .03 (1.0) .118 (3.0) .137 (3.5) 1000 8 515-01359 MHG1-3WE8 HGDC1-3 .03 (1.0) .118 (3.0) .137 (3.5) 1000 1000 9 515-01369 MHG1-3WE9 HGDC1-3 .03 (1.0) .118 (3.0) .137 (3.5) 0 515-02279 MHG2-5WE0 HGDC2-5 .078 (2.0) .196 (5.0) .137 (3.5) 1000 1 515-02289 MHG2-5WE1 HGDC2-5 .078 (2.0) .196 (5.0) .137 (3.5) 1000 2 515-02299 MHG2-5WE2 HGDC2-5 .078 (2.0) .196 (5.0) .137 (3.5) 1000 3 515-02309 MHG2-5WE3 HGDC2-5 .078 (2.0) .196 (5.0) .137 (3.5) 1000 4 515-02319 MHG2-5WE4 HGDC2-5 .078 (2.0) .196 (5.0) .137 (3.5) 1000 5 515-02329 MHG2-5WE5 HGDC2-5 .078 (2.0) .196 (5.0) .137 (3.5) 1000 6 515-02339 MHG2-5WE6 HGDC2-5 .078 (2.0) .196 (5.0) .137 (3.5) 1000 7 515-02349 MHG2-5WE7 HGDC2-5 .078 (2.0) .196 (5.0) .137 (3.5) 1000 8 515-02359 MHG2-5WE8 HGDC2-5 .078 (2.0) .196 (5.0) .137 (3.5) 1000 9 515-02699 MHG2-5WE9 HGDC2-5 .078 (2.0) .196 (5.0) .137 (3.5) 1000 0 515-02501 MHG3-7WE0 HGDC3-7 .118 (3.0) .275 (7.0) .137 (3.5) 500 1 515-02502 MHG3-7WE1 HGDC3-7 .118 (3.0) .275 (7.0) .137 (3.5) 500 2 515-02503 MHG3-7WE2 HGDC3-7 .118 (3.0) .275 (7.0) .137 (3.5) 500 3 515-02504 MHG3-7WE3 HGDC3-7 .118 (3.0) .275 (7.0) .137 (3.5) 500 4 515-02505 MHG3-7WE4 HGDC3-7 .118 (3.0) .275 (7.0) .137 (3.5) 500 5 515-02506 MHG3-7WE5 HGDC3-7 .118 (3.0) .275 (7.0) .137 (3.5) 500 6 515-02507 MHG3-7WE6 HGDC3-7 .118 (3.0) .275 (7.0) .137 (3.5) 500 7 515-02508 MHG3-7WE7 HGDC3-7 .118 (3.0) .275 (7.0) .137 (3.5) 500 8 515-02509 MHG3-7WE8 HGDC3-7 .118 (3.0) .275 (7.0) .137 (3.5) 500 9 515-02510 MHG3-7WE9 HGDC3-7 .118 (3.0) .275 (7.0) .137 (3.5) 500 0 515-03821 MHG4-9WE0 HGDC4-9 .157 (4.0) .354 (9.0) .196 (5.0) 250 1 515-03822 MHG4-9WE1 HGDC4-9 .157 (4.0) .354 (9.0) .196 (5.0) 250 2 515-03823 MHG4-9WE2 HGDC4-9 .157 (4.0) .354 (9.0) .196 (5.0) 250 3 515-03824 MHG4-9WE3 HGDC4-9 .157 (4.0) .354 (9.0) .196 (5.0) 250 4 515-03825 MHG4-9WE4 HGDC4-9 .157 (4.0) .354 (9.0) .196 (5.0) 250 5 515-03826 MHG4-9WE5 HGDC4-9 .157 (4.0) .354 (9.0) .196 (5.0) 250 6 515-03827 MHG4-9WE6 HGDC4-9 .157 (4.0) .354 (9.0) .196 (5.0) 250 7 515-03828 MHG4-9WE7 HGDC4-9 .157 (4.0) .354 (9.0) .196 (5.0) 250 8 515-03829 MHG4-9WE8 HGDC4-9 .157 (4.0) .354 (9.0) .196 (5.0) 250 9 515-03830 MHG4-9WE9 HGDC4-9 .157 (4.0) .354 (9.0) .196 (5.0) 250 Dimensions are approximate and subject to technical changes. Use Part No. for ordering and Type for specification purposes. 192 Pkg. Qty. 0 w w w . h e l l e r m a n n . t y t o n . c o m | 1 - 8 0 0 - 5 3 7 - 1 5 1 2 Identifying Miscellaneous Labels Identification Marker Plates Identification marker plates can be mounted in any direction, either vertically or horizontally as flags, tags, or wraparound identification plates. They can be marked with HellermannTyton marking pen (Part Number FTP) or hot stamped. These marker plates are manufactured from nylon and are white. Product Selection Article No. Part No. Type Width (W) in. (mm) Width 2 (W2) in. (mm) Length (L) in. (mm) Pkg. Qty. T18 Series thru T50 Series Ties 151-42159 IMP1.510C2 IMP1.5 .75 (19.1) 1.03 (26.2) 1.5 (38.1) 100 151-00238 IMP1.510M4 IMP1.5 .75 (19.1) 1.03 (26.2) 1.5 (38.1) 1000 151-00236 IMP1.7510C2 IMP1.75 1.75 (44.5) 1.28 (26.2) .75 (19.1) 100 151-00237 IMP1.7510M4 IMP1.75 1.75 (44.5) 1.28 (26.2) .75 (19.1) 1000 151-42229 IMP210C2 IMP210 .75 (19.1) 1.53 (38.90) 2.0 (50.8) 100 151-00239 IMP210M4 IMP210 .75 (19.1) 1.53 (38.90) 2.0 (50.8) 1000 151-42259 IMP2.510C2 IMP2.5 1.75 (44.75) 2.03 (51.6) 2.50 (63.5) 100 151-00240 IMP2.510M4 IMP2.5 1.75 (44.75) 2.03 (51.6) 2.50 (63.5) 1000 151-42359 IMP3.510C2 IMP3.5 .75 (19.1) 3.03 (77.0) 3.50 (88.9) 100 151-00241 IMP3.510M4 IMP3.5 .75 (19.1) 3.03 (77.0) 3.50 (88.90) 1000 151-42269 IMP2.5W1.7510C2 IMP2.5 1.75 (44.75) 2.03 (51.6) 2.50 (63.5) 100 151-00242 IMP2.5W1.7510H4 IMP2.5 1.75 (44.75) 2.03 (51.6) 2.50 (63.5) 500 Dimensions are approximate and subject to technical changes. Use Part No. for ordering and Type for specification purposes. w w w . h e l l e r m a n n . t y t o n . c o m | 1 - 8 0 0 - 5 3 7 - 1 5 1 2 193