Approval sheet
Automotive Capacitors (MT) _Qualified to AEC-Q200
Page 22 of 26 ASC_ Automotive Cap_(MT)_022K_DS May. 2016
No.
AEC-Q200
Test Item AEC-Q200 Test Condition Requirements
* Capacitance
* Q/ D.F. (Dissipation Factor)
Cap1000pF 1.0±0.2Vrms, 1MHz±10%
Cap>1000pF 1.0±0.2Vrms, 1KHz±10%
* Capacitance within the specified tolerance.
* Q/D.F. value:
NPO: Cap30pF, Q1000 ; Cap<30pF, Q400+20C.
X7R:
Rated
vol. D.F.≦ Exception of D.F. ≦
3%≦
0201(50V); 0603 0.047F; 0805 0.18F;1206 0.47F≧ ≧ ≧
5%≦
1210 4.7F≧
50V≧
2.5%≦
10%≦
0402≧0.1F;0603 1F; 0805 1F;1206≧ ≧ ≧2.2F;
1210 10F; TT series≧
35V 3.5%≦
10%≦
0603≧1F;08052.2µF; 1210 10F≧
5%≦
0201 0.01F;0805 1F; 1210 10F≧ ≧ ≧
7%≦
0603 0.33F; 1206 4.7F≧ ≧
25V 3.5%≦
10%≦
0402 0.10F;0603 0.47F; 0805 2.2F;≧ ≧ ≧
1206 6.8F ; 1210≧22≧F ; TT series
5%≦
0201 0.01F;0402 0.033F;0603 0.15F; ≧ ≧ ≧ ≧
0805 0.68F;1206≧ ≧2.2F;1210 4.7F≧
16V 3.5%≦
10%≦
0201≧0.1uF; 0402 0.22uF; 0603 0.68F;0805 2.2F;≧ ≧ ≧
1206 4.7F; 1210 22F; TT series ≧ ≧
10%≦
0201 0.012F;0402 0.33F;0603 0.33F; 0805 2.2F;≧ ≧ ≧ ≧
1206 2.2F;1210 22F; TT series≧ ≧
10V 5%≦ 15%≦
0201 0.1F; 0402 1F≧ ≧
15%≦
0201 0≧.1F;0402 1F;0603 10F; 0805 4.7F; ≧ ≧ ≧
1206 47F :1210 100F; TT series ≧ ≧
6.3V 10%≦
20%≦
0402 2.2≧F
4V 15%≦
--- ---
* Insulation Resistance
To apply rated voltage for max. 120 sec.
* IR. 10G or RxC500-F whichever is smaller.
Class II (X7R)
Rated voltage Insulation
Resistance
100V: X7R
50V:06031µF;08051µF;12064.7µF;12104.7µF
35V:08052.2µF;1210 10F≧
25V:04021µF;06032.2µF;08052.2µF;120610µF;121010µF
16V: 0201≧0.1uF;04020.22µF;06031µF;08052.2µF;
120610µF;121047µF
10V:020147nF;04020.47µF;06030.47µF;08052.2µF;
12064.7µF;121047µF
6.3V ; 4V ; TT series
10G or
RxC 100 ≧-
whichever is
smaller.
* Dielectric Strength
To apply 250% of rated voltage, duration
1~5 sec,
charge and discharge current less than
50mA.
* Dielectric strength
No evidence of damage or flash over during test.
17.
Electrical
Characterization
* Temperature Coefficient (with no
electrical load)
Operation temperature: -55~125°C at
25°C
* Temperature Coefficient
Capacitance Change: NPO: Within ±30ppm/°C
X7R: Within ±15%