Aluminum Solid Capacitors with Conductive Polymer Aluminum Solid Capacitors with Organic Semiconductive Electrolyte Conductive polymer type / Surface mount type RoHS compliance Guaranteed at 125 Series This series has advanced characteristics in resistance to heat compared with the SVP series. The SVQP series is best suited for devices that require enhanced reliability. This product can support lead free-reflow. 2 SVP SVQP (Standard) High reliability Specifications Items Condition Specifications Rated voltage (V) - 4.0 6.3 10 16 20 Surge voltage (V) Room temperature 5.2 8.2 12 18 23 Category temperature range () Capacitance tolerance - () 120Hz/20 M : 20 120Hz/20 Please see the attached characteristics list Rated voltage applied, after 2 minutes Please see the attached characteristics list 100kHz to 300kHz/20 Please see the attached characteristics list Dissipation Factor (DF) Leakage current1 -55 to 125 Equivalent series resistance (ESR) Characteristics of impedance ratio at high temp. and low temp. Based the value at 100kHz, 20 125 Z/Z20 0.75 to 1.25 C/C Within 20% of the initial value DF Within 2 times of the initial limit ESR Within 2 times of the initial limit 125, 1,000h, Rated voltage applied Endurance LC Within the initial limit C/C Within 20% of the initial value DF Within 1.5 times of the initial limit 60, 90 to 95%RH, 1,000h, No-applied voltage Damp heat(Steady state) Resistance to soldering heat2 0.75 to 1.25 -55 Z/Z20 ESR Within 1.5 times of the initial limit LC Within the initial limit (after voltage processing) C/C Within 10% of the initial value DF Within 1.3 times of the initial limit ESR Within 1.3 times of the initial limit LC Within the initial limit (after voltage processing) VPS (230 X 75s) 1 In case of some problems for measured values, measure after applying rated voltage for 120 minutes at 125. 2 Please refer to page 12 for reflow soldering conditions. Marking and dimensions Size 0.5 code D W Case No. Series (QP) 22 20 Rated capacitance D QP Rated voltage L P C 003 (unit : mm) 0.2max H Polarity marking Cathode R Size list F 4.0 6.3 10 C6 56 82 C6 100 C6 E7 120 150 220 44 E7 E7 C6 E7 P 0.2 5.9 6.6 6.6 7.3 0.6 to 0.8 2.1 6.9 8.3 8.3 9.0 0.6 to 0.8 3.2 20 E7 47 R 8.0 C6 39 C 0.2 6.3 C6 22 H 0.2 E7 16 W 0.2 C6 RV : Rated voltage RV 0.1 L -0.4 RoHS compliance SVQP series characteristics list Size code Part number Rated Rated ESR(m) (max) voltage capacitance 100kHz to 300kHz/20 (F) (V) Rated ripple current Allowable ripple current 100kHz (mArms)1 105<Tx125 Tx105 DF (% max) Leakage current (A)(max) After 2 minutes 20SVQP22M 20 22 60 459 1450 10 220 16SVQP39M 16 39 50 512 1620 10 312 10SVQP56M 10 56 45 538 1700 12 280 C6 E7 6SVQP82M 6.3 82 45 538 1700 12 258 6SVQP100M 6.3 100 40 572 1810 12 315 4SVQP150M 4.0 150 40 572 1810 12 300 20SVQP47M 20 47 45 598 1890 12 470 16SVQP82M 16 82 40 670 2120 12 656 10SVQP120M 10 120 35 810 2560 12 600 10SVQP150M 10 150 35 810 2560 12 750 220 35 810 2560 12 693 6SVQP220M 6.3 Aluminum Solid Capacitors with Conductive Polymer Aluminum Solid Capacitors with Organic Semiconductive Electrolyte Conductive polymer type / Surface mount type 1 Tx : Ambient temperature Recommended land pattern dimension of PWB (unit : mm) a b C6 2.1 9.1 1.6 c E7 2.8 11.1 1.9 c Size code a b Frequency coefficient for ripple current Frequency 120Hz f < 1kHz 1kHz f < 10kHz 10kHz f < 100kHz 100kHz f 500kHz Coefficient 0.05 0.3 0.7 1 45