2 of 4 DS091124
7628 Thorndike Road, Greensboro, NC 27409-9421 · For sales or technical
support, contact RFMD at (+1) 336-678-5570 or sales-support@rfmd.com.
D10040200PL1
Absolute Maximum Ratings
Parameter Rating Unit
RF Input Voltage (single tone) 65 dBmV
DC Supply Over-Voltage (5 minutes) 30 V
Storage Temperature -40 to +100 °C
Operating Mounting Base Tempera-
ture -30 to +100 °C
Parameter Specification Unit Condition
Min. Typ. Max.
Distortion data 40MHz to
550MHz
V
B
=24V, T
MB
=30°C, Z
S
=Z
L
=75
CTB -70 -67 dBc 79 ch 7dB tilted; V
O
=50dBmV at 550MHz, plus
75 digital channels (-6dB offset)
[2]
XMOD -65 -62 dBc 79 ch 7dB tilted; V
O
=50dBmV at 550MHz, plus
75 digital channels (-6dB offset)
[2]
CSO -71 -68 dBc 79 ch 7dB tilted; V
O
=50dBmV at 550MHz, plus
75 digital channels (-6dB offset)
[2]
CIN 59 63 dB 79 ch 7dB tilted; V
O
=50dBmV at 550MHz, plus
75 digital channels (-6dB offset)
[2]
2. 79 analog channels, NTSC frequency raster: 55.25MHz to 547.25MHz, +43dBmV to +50dBmV tilted output level, plus 75 digital channels, -6dB offset
relative to the equivalent analog carrier.
Composite Second Order (CSO) - The CSO parameter (both sum and difference products) is defined by the NCTA.
Composite Triple Beat (CTB) - The CTB parameter is defined by the NCTA.
Cross Modulation (XMOD) - Cross modulation (XMOD) is measured at baseband (selective voltmeter method), referenced to 100% modulation of the car-
rier being tested.
Carrier to Intermodulation Noise (CIN) - The CIN parameter is defined by ANSI/SCTE 17 (Test Procedure for Carrier to Noise)
Caution! ESD sensitive device.
Exceeding any one or a combination of the Absolute Maximum Rating conditions may
cause permanent damage to the device. Extended application of Absolute Maximum
Rating conditions to the device may reduce device reliability. Specified typical perfor-
mance or functional operation of the device under Absolute Maximum Rating condi-
tions is not implied.
RoHS status based on EUDirective 2002/95/EC (at time of this document revision).
The information in this publication is believed to be accurate and reliable. However, no
responsibility is assumed by RF Micro Devices, Inc. ("RFMD") for its use, nor for any
infringement of patents, or other rights of third parties, resulting from its use. No
license is granted by implication or otherwise under any patent or patent rights of
RFMD. RFMD reserves the right to change component circuitry, recommended appli-
cation circuitry and specifications at any time without prior notice.