Today testing of fiber optic
links is more sensitive than
ever. AMP NETCONNECT
test kits guarantee precise
and replicable fiber testing.
All kits contain connectors
with controlled end faces
and support testing with 3
jumper test method in
accordance to ISO/IEC
14763-3.
Each kit contains:
■Test leads for simplex and
duplex IL test
■Test leads for CPR tests
■Fiber coupling bushes
■Two mandrels
(Multimode only)
■Cleaning aides
■Instruction manual
■Data sheet of end face
geometry
84
Catalog 1307895 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 11-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 31-73-624-6639
Tooling
Fiber Optic Products Catalog
Powermeter Launch Lead
Kits for Optical Testing and
Certification
OTDR Launch Lead Kits for
Optical Testing and
Certification
Consumables for Power
Meter and OTDR Launch
Lead Kits
Note: Part Numbers are RoHS compliant except:⽧Indicates non-RoHS compliant.
Description Part Number
50 µm, Multimode Launch Lead Y-6695241-X
62.5 µm, Multimode Launch Lead Y-6695243-X
9 µm, Singlemode Launch Lead Y-6695245-X
Y- -X Connector Type
-1 SC/PC to SC/PC
-2 SC/PC to ST/PC
-3 SC/PC to LC/PC
-4 SC/PC to FC/PC
-5 SC/PC to MT-RJ
Y- -X Connector Type
-6 ST/PC to SC/PC
-7 ST/PC to ST/PC
-8 ST/PC to LC/PC
-9 ST/PC to FC/PC
1- -0 ST/PC to MT-RJ
Y- -X Connector Type
1- -1 LC/PC to SC/PC
1- -2 LC/PC to ST/PC
1- -3 LC/PC to LC/PC
1- -4 LC/PC to FC/PC
1- -5 LC/PC to MT-RJ
Y- -X Connector Type
1- -6 FC/PC to SC/PC
1- -7 FC/PC to ST/PC
1- -8 FC/PC to LC/PC
1- -9 FC/PC to FC/PC
2- -0 FC/PC to MT-RJ
Explanation: Connector 1 — to test equipment
Connector 2 — under test
Each kit contains:
■Launch and tail lead
■Length 400 m Multimode
and 500 m Singlemode
■Data sheet of end face
geometry
■Coupling bushings
■Cleaning aides
■Instruction manual
Description Part Number
50 µm, Multimode Launch Lead Y-6695240-X
62.5 µm, Multimode Launch Lead Y-6695242-X
9 µm, Singlemode Launch Lead Y-6695244-X
Description Part Number
Cleaning Lens Book 434376-1
Compressed Air Bottle 1206860-1
Cleaning Stick 2.50 mm 1918807-1
Cleaning Stick 1.25 mm 1918808-1
Cleaning Stick MT-RJ 1391089-1
Y- -X Connector Type
-1 SC/PC to SC/PC
-2 SC/PC to ST/PC
-3 SC/PC to LC/PC
-4 SC/PC to FC/PC
-5 SC/PC to MT-RJ
Y- -X Connector Type
-6 ST/PC to SC/PC
-7 ST/PC to ST/PC
-8 ST/PC to LC/PC
-9 ST/PC to FC/PC
1- -0 ST/PC to MT-RJ
Y- -X Connector Type
1- -1 LC/PC to SC/PC
1- -2 LC/PC to ST/PC
1- -3 LC/PC to LC/PC
1- -4 LC/PC to FC/PC
1- -5 LC/PC to MT-RJ
Y- -X Connector Type
1- -6 FC/PC to SC/PC
1- -7 FC/PC to ST/PC
1- -8 FC/PC to LC/PC
1- -9 FC/PC to FC/PC
2- -0 FC/PC to MT-RJ
Explanation: Connector 1 — to test equipment
Connector 2 — under test
85
Catalog 1307895 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 11-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 31-73-624-6639
Tooling (Continued)
Fiber Optic Products Catalog
Connectors/Adapters/
Tooling & Accessories
1
Epoxy/Polish Connector Consumables/Compatibility Chart
Epoxies (Part Number) Polishing Films (Part Number) Consumable
EPO-TEK TRA-CON HYSOL 9 µm 5 µm Diamond Film 0.3 µm Final Polishing Film Package*
(504035-1 (501195-4) (502418-1) (1374484-1) (228433-8) (503887-1) (228433-5) (502748-2) Part Number
LC Singlemode XXXXXXX — 502306-4
LC Multimode XXXXXXX — 502306-4
SC Singlemode X X X—X—X X 502306-2
SC Multimode X X X—X—X X 502306-2
ST Singlemode — X X—X—X X 502306-2
ST Multimode — X X—X—X — 502306-1
*Epoxy & film for » 100 connectors.
Tool Kit Compatibility Chart
Part Number MT-RJ MT-RJ SECURE MT-RJ LIGHTCRIMP PLUS LIGHTCRIMP Epoxy/Polish
Jacks Jacks Plugs LC SC ST SC ST LC SC ST FC FSD FSMA
Deluxe Premises 1278949-2 X X X X X X X
Termination Tool Kit 1278949-3* X X X X X X X
MT-RJ Jack Tool Kit 1278346-1 X X
1278346-2* X X
LIGHTCRIMP PLUS No Epoxy/ 1278118-4 X X X X X
No Polish Universal Tool Kit 1278118-5* X X X X X
MT-RJ Plug Termination Kit 1278745-1 X
1278745-2* X
LIGHTCRIMP PLUS No Epoxy/ 1754845-1 X
No Polish LC Tool Kit 1754845-2* X
LIGHTCRIMP PLUS No Epoxy/ 1278022-1 X
No Polish SC Tool Kit 1278022-2* X
LIGHTCRIMP PLUS No Epoxy/ 492697-1 X
No Polish ST Tool Kit 492697-2* X
LIGHTCRIMP SC/ST 503957-1 X X
No Epoxy/Polish Tool Kits 503957-3 X X
492543-1 X X
LIGHTCRIMP SC No Epoxy/ 503706-1 X
Polish Tool Kits 503706-2 X
LIGHTCRIMP ST No Epoxy/ 503330-1 X
Polish Tool Kits 503330-3 X
492322-1 X
Pro-installer Epoxy/ 501258-7 X1XXX X X
Polish Tool Kits 501258-8 X1XXX X X
501258-9 X1XXX X X
Epoxy/Polish SC/FC Tool Kit 503746-7 X2XX
(no microscope, no curing oven)
Epoxy/Polish ST Tool Kit 503746-1 X2X
(no microscope, no curing oven)
Epoxy/Polish FSMA Tool Kit 503746-2 X2X
(no microscope, no curing oven)
Epoxy/Polish FSD Tool Kit 503746-6 X2X
(no microscope, no curing oven)
1For LC terminations, also order Part Number 1754462-1.
2For LC terminations, also order Part Number 1754603-1.
*Includes Precision Cleaver and Microscope.
Note: All part numbers are RoHS compliant.
86
Catalog 1307895 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 11-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 31-73-624-6639
Tooling (Continued)
Fiber Optic Products Catalog
Deluxe Premises
Termination Tool Kit
Part Number 1278949-2
Part Number 1278949-3
(Includes Precision Cleaver
and Microscope)
Product Facts
■Includes all tools needed for
installing the listed type
LIGHTCRIMP PLUS no
epoxy/no polish connectors,
MT-RJ and MT-RJ SECURE
Jacks
■LIGHTCRIMP PLUS
Connector Termination
Video CD-Rom also
available separately,
Part Number 1374503-1
■Convenient carrying case
Description Part Number
Universal LIGHTCRIMP PLUS No epoxy/No polish Tool Kit (SC, LC, ST and MT-RJ Jack) 1278118-4 1278118-51
LIGHTCRIMP PLUS LC Connector Termination Tool Kit 1754845-1 1754845-21
LIGHTCRIMP PLUS SC Connector Termination Tool Kit 1278022-1 1278022-21
LIGHTCRIMP PLUS ST Connector Termination Tool Kit 492697-1 492697-21
1Includes Precision Cleaver and Microscope.
Note: All part numbers are RoHS compliant.
MT-RJ Jack Termination
Tool Kit
Part Number 1278346-1
Part Number 1278346-2
(Includes Precision Cleaver
and Microscope)
LIGHTCRIMP PLUS
Termination Tool Kits
Product Facts
■Includes all tools need for
installing popular
field-installable connectors
■MT-RJ and MT-RJ
SECURE Jacks
■LIGHTCRIMP PLUS SC,
LC and ST connectors
■LIGHTCRIMP SC and ST
connectors
■Convenient carrying case
■Includes consumables for
LIGHTCRIMP connector
terminations
■For additional
LIGHTCRIMP connector
terminations, order
additional polishing films
228433-9, 228433-8,
228433-7 and 228433-5
(page 93)
■Includes instructional
CD-ROM video
Product Facts
■Includes all tools needed for
installing MT-RJ and MT-RJ
SECURE Jacks
MT-RJ Plug Termination
Tool Kit
Part Number 1278745-1
Part Number 1278745-2
(Includes Precision Cleaver
and Microscope)
Product Facts
■Includes all tools needed to
terminate MT-RJ Plug in
handy plastic case
■Contents: Cleave pen,
Jacket/Buffer/Coating
Stripper, KEVLAR Shears,
Strip Template, Cable
Clamps, Cure Fixtures,
Crimp Tool, Die Sets, Epoxy
Dispensers
KEVLAR is a trademark of E.I. du Pont
de Nemours and Company.
87
Catalog 1307895 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 11-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 31-73-624-6639
Tooling (Continued)
Fiber Optic Products Catalog
Connectors/Adapters/
Tooling & Accessories
1
No Epoxy/No Polish
Upgrade and Adaptive
Termination Tool Kits
Product Facts
■Upgrade Tool Kit
supplements existing
LIGHTCRIMP PLUS Tool Kits
with tools needed to install
LC connectors
■Adaptive Tool Kits
supplements existing fiber
optic tool kits with the tools
needed to terminate
LIGHTCRIMP PLUS
connectors
■Saves money on full tool
kit by reusing tools from
currently owned tool kits
Description Terminates Includes Cost Savings Part Number
LC LIGHTCRIMP PLUS Upgrade Kit LIGHTCRIMP PLUS LC LC Die Set Low Cost Upgrade 1754847-2
and Cable Holder for Current Tool Kit
Crimp Tool,
LC Die Set, Fiber and Cable
LC LIGHTCRIMP PLUS Adaptive Kit LIGHTCRIMP PLUS LC LC Cable Holder, Strippers in Current 1754846-1
Cleave Tool and Tool Kit 1754846-2*
Instruction Sheet
Crimp Tool,
SC Die Set, Fiber and Cable
SC LIGHTCRIMP PLUS Adaptive Kit LIGHTCRIMP PLUS SC SC Cable Holder, Strippers in Current 1754737-1
Cleave Tool and Tool Kit 1754737-2*
Instruction Sheet
Crimp Tool,
SC and ST Die Sets, Fiber and Cable
Combination LIGHTCRIMP PLUS LIGHTCRIMP PLUS SC and ST SC and ST Cable Holders, Strippers in Current 1754739-1
Adaptive Kit Cleave Tool and Tool Kit 1754739-2*
Instruction Sheets
Crimp Tool,
ST Die Set, Fiber and Cable
ST LIGHTCRIMP PLUS Adaptive Kit LIGHTCRIMP PLUS ST ST Cable Holder, Strippers in Current 1754738-1
Cleave Tool and Tool Kit 1754738-2*
Instruction Sheet
*Includes microscope and precision cleaver
LIGHTCRIMP PLUS
Cable Holders
Product Facts
■Used in LIGHTCRIMP PLUS
connector terminations
(included in
LIGHTCRIMP PLUS
Tool Kits)
Fiber Optic Cleave Tool
Part Number 492674-1
Product Facts
■Cleave fibers for
LIGHTCRIMP PLUS
connectors
■One is included in basic
tool kits for MT-RJ Jacks
and LIGHTCRIMP PLUS
connectors (not the LC
Upgrade Kit)
■Easy to use: clamp, score
and bend
■Blade life-span is » 1000
cleaves
A
B
C
Description Figure Part Number
ST A 492703-1
SC B 1278023-1
LC C 1754138-1
Note: All part numbers are RoHS compliant.
88
Catalog 1307895 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 11-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 31-73-624-6639
Tooling (Continued)
Fiber Optic Products Catalog
“New” Hand Held Precision
Cleaver
Part Number 1871696-1
Hand Held Precision Cleaver
Part Number 1871696-2
Hand Held Precision Cleaver
with Trash Can
(not a stocked item)
Product Facts
■Operator independent =
no craft sensitivity =
consistent cleave every time
■Hand held operation
■10,000 cleave blade life
■4, 6, 8, 10, and 18
millimeter cleave lengths
■Product specific markings
for LIGHTCRIMP PLUS and
MT-RJ jack connectors,
CORELINK splice, and
fusion splicing
■Cleaved surface angle < 1.5°
■No lip, no fracture, and
no roll-off
■Padded belt case for
convenience and storage
■Neck lanyard included
Tyco Electronics’ hand
held precision fiber cleaver
provides precision quality
cleaves with the feel and
robustness of a full scale
precision cleaver in a hand
held size at an exceptionally
competitive price. The
10,000 cleave blade life far
exceeds that of any other
hand held cleaver currently
on the market. The detailed
scale markings indicate
proper cleave lengths for
popular Tyco Electronics
field installable fiber optic
connectors and mechanical
splices in addition to the
standard numerical markings
for other applications
including fusion splicing.
The included belt pouch
and neck lanyard ensure
that the cleaver is always
within reach.
Applications
Affordable precision cleav-
ing solution for:
■Field installable mechani-
cal splice connectors
■Fusion splicing
■Mechanical splicing
■Bare fiber adapters
Product Dimensions
Length — 74 mm [2.913 in.]
Width — 65.5 mm [2.578 in.]
Thickness — 33.5 mm [1.318 in.]
Weight — 136 g [0.30 lb.]
Note: All part numbers are RoHS compliant.
89
Catalog 1307895 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 11-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 31-73-624-6639
Tooling (Continued)
Fiber Optic Products Catalog
Connectors/Adapters/
Tooling & Accessories
1
LIGHTCRIMP Termination
Tool Kits
Product Facts
■Includes all tools needed for
installing the listed type
LIGHTCRIMP no epoxy/
polish connectors
■Convenient carrying case
■Includes consumables for
installing 60 LIGHTCRIMP
connectors
■For additional
LIGHTCRIMP
terminations, order
additional polishing films
228433-9, 228433-8,
228433-7 and 228433-5
(page 93)
■Note: photo is
representative of kits —
contents may vary by Part
Number
Description Microscope (if listed) Part Number
LIGHTCRIMP SC Termination Kit — 503706-1
Premium Microscope 503706-2
— 503330-1
LIGHTCRIMP ST Termination Kit Premium Microscope 503330-3
Mini Tool Kit — 492322-1
— 503957-1
LIGHTCRIMP SC and ST Termination Kit Premium Microscope 503957-2
Mini Tool Kit — 492543-1
LIGHTCRIMP Cleave Tool
Part Number 503705-1
Product Facts
■Used in both SC and ST
LIGHTCRIMP Connector
terminations
■Included in the Deluxe and
LIGHTCRIMP Tool Kits
Note: All part numbers are RoHS compliant.
90
Catalog 1307895 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 11-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 31-73-624-6639
Tooling (Continued)
Fiber Optic Products Catalog
Epoxy/Polish Connector
Termination Tool Kits
Product Facts
■Includes all tools necessary
to install the listed epoxy/
polish connectors
■For LC terminations, also
order Part Number
1754603-1
■Tool kits include:
■Pro-Crimper II Hand Tool
and crimping dies
■Polishing bushings
■Polishing film (also sold
separately, page 93)
■Cable and fiber strippers
■Scissors
■Scribe tool
■Includes polishing films to
install » 60 epoxy/polish
connectors
■Epoxy is sold separately
(see page 92)
■Does not include curing
oven or microscope
■Convenient carrying case
Pro-Installer Epoxy/Polish
Connector Termination
Tool Kits
Product Facts
■Includes all tools necessary
to install SC, ST, and FC
Connectors
■For LC terminations, also
order Part Number
1754462-1
■Tool kits include:
■Pro-Crimper II Hand Tool
and crimping dies
■Polishing bushings
■Polishing film (also sold
separately, page 93)
■Cable and fiber strippers
■Scissors
■Scribe tool
■Includes polishing films to
install 60 epoxy/polish
connectors
■Epoxy is sold separately
(see page 92)
■Kits available with curing
oven and microscope or
without
■Convenient carrying case
■Photo is representative of
kits — contents vary by
Part Number
Professional Installer Kit
Description Part Number
With 110 V Curing Oven and Microscope 501258-7
With 220 V Curing Oven and Microscope 501258-8
Without Curing Oven or Microscope 501258-9
Description Part Number
SC and FC 503746-7
ST 503746-1
FSMA 503746-2
FSD 503746-6
Note: All part numbers are RoHS compliant.
91
Catalog 1307895 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 11-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 31-73-624-6639
Tooling (Continued)
Fiber Optic Products Catalog
Connectors/Adapters/
Tooling & Accessories
1
Cable Stripper
Part Number 1375317-1 Product Facts
■Cyclops Stripper ideal for
stripping twisted pair (UTP
and STP) and fiber optic
cables up to 10.92 [0.43]
diameter
Note: All part numbers are RoHS compliant.
Sapphire-Tipped Scribe
Tool and Accessories
Product Facts
■Long-lasting sapphire blade
■Pen-type casing
■Used to install all Epoxy/
Polish Connectors
■Included in Epoxy/Polish
Tool Kits
Description Part Number
Sapphire-tipped Scribe Tool 504064-1
Replacement Blades 504290-1
92
Catalog 1307895 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 11-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 31-73-624-6639
Tooling (Continued)
Fiber Optic Products Catalog
Note: All part numbers are RoHS compliant.
TRA-CON Epoxies
Part Number 1918652-1
HYSOL Epoxy-Tubes
Part Number 502418-1
Product Facts
■For use with SC, LC, ST,
FSD, FC, and FSMA
Connectors
■Two-part epoxy in two tubes
■Heat-cured epoxy
■Terminates » 400
connectors
■One set of two (2) tubes per
part number
■Pot life = 30 minutes
■Cures in 30 minutes at
100° C
Product Facts
■For use with SC and LC
Connectors
■Pre-measured two-part
packets for consistent
results
■Long pot life once mixed
■Heat-cured epoxy
■Supplied in 4-gram packets
■Cures in 15 minutes at
115° C
EPO-TEK 353ND Epoxy
Part Number 504035-1
Description Part Number
LC Polishing Puck — Metal 1754074-1
LC Cable Preparation Template 1588756-1
LC Hand Tool and Die Set 1588176-1
LC 1.25 mm Ferrule Microscope Adapter 1278997-1
LC Oven Block Assembly 1457628-1
LC Adaptive Kit — Anaerobic Epoxy Style 1754603-1
LC Adaptive Kit — Heat Cure 1754462-1
Epoxy/Polish LC
Termination Accessories
Product Facts
■Supplement epoxy/polish
tool kits on page 90 with
these components to
terminate LC Epoxy/Polish
Connectors
■Different polishing films are
required for LC polishing
(see table on page 85 and
films on page 93)
Product Facts
■For use with SC, LC, and
ST Connectors
■Pre-measured two-part
packets for consistent
results
■Can be heat-cured or cured
at ambient temperature
■Supplied in 2-gram packets
■Each packet terminates »
250 connectors
■25 packets per pack
■Pot life = 30 minutes
■Cures in:
■24 hours @ 25° C
■2 hours @ 65° C
■10 minutes @ 110° C
QC Quick Cure Adhesive
Product Facts
■One-part adhesive
eliminates the hassle and
mess of mixing
■Applies easily and cures
in minutes without heat or
UV light
■Works with standard
multimode epoxy-style
connectors without
performance degradation
■Faster procedure for time-
saving productivity and
lower installed costs
■Not for use with singlemode
terminations
Tube Typical Connector Part Number
Size Terminations Per Tube*
3 grams 100 492508-1
*Your individual termination techniques will affect the number of terminations
per tube.
93
Catalog 1307895 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 11-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 31-73-624-6639
Tooling (Continued)
Fiber Optic Products Catalog
Connectors/Adapters/
Tooling & Accessories
1
Description Part Number
110 VAC 502134-1
220 VAC 502134-2
Adapter Block for 502222-1
8 Duplex Connectors
Adapter Block for 502129-1
24 Single Connectors
Block Assembly for
1.6, 2.0 & 2.4 mm 1457528-1
SC and FC (metal crimp body)
and LC Connectors
Epoxy Curing Oven
Product Facts
■Reduces time required to
cure epoxy
■Provides a uniform,
controlled curing
environment
■Used for all epoxy/polish
connectors
■Comes equipped to cure up
to four Duplex Connectors
and 12 Simplex Connectors
at once
■Optional blocks
reconfigure to 8 Duplex or
24 Simplex Connectors
■Variable temperature
control (60°C to 125°C)
■Includes thermometer and
cable support bracket
■Two voltage options
■Curing sleeves on page 98
Epoxy Applicator Syringe
Part Number 501473-3
Product Facts
■3 cc capacity
Part Number
Description FSMA Multimode Singlemode FC FSD/RSD SC LIGHTCRIMP XTC LC
ST ST
Hand Polishing Film:
15 µm4——————228433-9 —
9 mm —————— —1374484-13
5 µm4228433-8 228433-8 228433-8 228433-8 228433-8 228433-8 228433-8 228433-8
1 µm4228433-7 228433-7 — — 228433-7 — 228433-7 —
Fine Diamond Film1—————— —503887-1
0.3 µm4228433-5 228433-5 228433-5 228433-5 228433-5 228433-5 228433-5 228433-5
Final Polish Film1— — 502748-2 502748-2 — 502748-2 — —
Consumables Kit2502306-1 502306-1 502306-2 502306-2 502306-1 502306-2 — 502306-4
1Pack of 5.
2Contains all consumable supplies for at least 100 connectors.
3Pack of 15.
4Pack of 100.
Polishing Films
Product Facts
■Used to install LIGHTCRIMP
and epoxy/polish connectors
Note: All part numbers are RoHS compliant.
Product Dimensions
Length — 18.5 cm [7.283 in]
Width — 2.2 cm [0.866 in]
Thickness — 2.2 cm [0.866 in]
Weight (w/battery) — 150 g [0.33 lb]
94
Catalog 1307895 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 11-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 31-73-624-6639
Tooling (Continued)
Fiber Optic Products Catalog
Hand Held Visual Fault
Locator (VFL)
Product Facts
■650 nm (visible) Class 2
1.0 mW max Diode Laser
■Continuous and flashing
(2-3 Hz pulsed) modes
■Rugged rubber shell and
body design modeled after a
popular military connector
■Lanyard attached dust cover
■Standard 2.5 mm adapter for
SC, ST, and FC connectors
■Optional 1.25 mm adapter
for LC and MU connectors.
■Unique design allows
adapter to permanently
reside on VFL so it is not
misplaced allowing user to
choose 1.25 mm or 2.5 mm
■Uses 1 “AA” style battery
for >30 hours of continuous
use
■Soft-sided belt case for
convenience and storage
Description Part Number
Hand Held Visual Fault Locator 1828352-1
1.25 mm Adapter for Hand Held VFL 1828353-1
Includes Part Numbers 1828352-1 and 1828353-1 1828352-2
Note: All part numbers are RoHS compliant.
The Tyco Electronics Hand
Held Visual Fault Locator
(VFL) is a rugged and
affordable solution for identi-
fying breaks and bending
in optical fibers and cabling.
Its powerful, red (650 nm)
laser provides the ability to
locate damaged, broken, or
tightly bent fibers that cause
undesirable attenuation in
your system.
The jacket of the cable will
glow red at the location of
the fault. The FLASH button
allows the user to toggle
between continuous or
pulsed mode. The compact,
rugged, and balanced
design is based upon a
popular harsh environment
fiber optic connector. The
single “AA” style battery is
good for >30 hours of con-
tinuous use and the soft-
sided protective case with
belt loop provides a con-
venient and protective
means of storage.
Applications
Affordable VFL Solution for:
■Identifying breaks, bends,
and other damage in
optical fibers
■Tracing fiber paths
■Identifying termination
errors
■Continuity testing
95
Catalog 1307895 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 11-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 31-73-624-6639
Fiber Optic Products Catalog
Connectors/Adapters/
Tooling & Accessories
1
Tooling (Continued)
Hand Held Microscope
Product Facts
■High quality glass optics
■200X magnification
■Optimal visual examination
of terminated ends
■500um field of view
■Dual illumination
■Coaxial for inspecting
polish quality
■Oblique for general
conditions
■Pre-centered, threaded
adapter mount provides
easy focusing and changing
of connectors
■Field and laboratory
examination for multimode
and singlemode fibers
■Portable
■Integral infrared filter for
safety
■Do NOT use any
microscope to view active
fiber signals
■Disposable, Type LR44
batteries
■Long-life LED
(approximately 100,000
hours of operation)
■Each Kit includes:
■10-power objective
microscope with an
impact resistant
ergonomic rubber shell
and high quality glass
optics
■20-power eyepiece
■Padded carrying case
with an integrated belt
loop and internal adapter
storage pocket
■Neck lanyard with safety
breakaway feature
■Universal 2.5 mm ferrule
adapter (for SC, ST
and FC)
■Other adapters available
are:
■Universal 1.25 mm
(adapts LC and MU)
■MT-RJ
■MPO
■MPO APC
■MPX
■MPX APC
Description Part Number
Hand Held Microscope 1754767-1
1.25 mm Universal LC and MU 1754765-1
2.5 mm Universal SC, ST and FC 1754766-1
SC APC 1828833-1
MT-RJ 1754768-1
Adapters MPO 1828836-1
MPO APC 1828837-1
LIGHTRAY MPX Connectors 1828834-1
LIGHTRAY MPX APC Connectors 1828835-1
FSMA 1985040-1*
* Coupling adapter Part Number 1985041-1 required.
DANGER: Active fibers should never be viewed through a microscope.
Note: All part numbers are RoHS compliant.
Tyco Electronics’ hand held
microscope incorporates
high quality glass optics
and dual illumination light-
ing for unsurpassed 200X
magnification. With a
500 µm Field of View (FOV)
and both coaxial and
oblique illuminations, this
microscope will meet the
proposed TIA/IEC hand held
microscope specification
for a polish quality scope
(coaxial) and general
conditions scope (oblique)
in one compact unit.
The built in IR-laser
attenuation filter will provide
protection from accidental
exposure to active fibers,
although intentional and
prolonged viewing of active
fibers is not recommended.
The ergonomic, impact
resistant shell provides
a rugged feel, and the
included padded belt case
and neck lanyard ensure
that the microscope is
always within reach.
Applications
Affordable inspection
device for:
■Polish inspection
■General conditions
(debris) inspection
■Cleave quality inspection
■Verifying core size
Product Dimensions
Length — 186.9 mm [7.359 in.]
Width — 51.6 mm [2.030 in.]
Height — 31.5 mm [1.240 in.]
Weight — 317.5 g [0.70 lb.]
96
Catalog 1307895 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 11-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 31-73-624-6639
Fiber Optic Products Catalog
Tooling (Continued)
MTP/MPO IBC Cleaner
Part Number 1918809-1
Product Facts
■Cleans male or female
MTP/MPO connectors
■Pre-washed cleaning cloth
is lint and debris free
■Each cleaner is capable of
more than 400 cleanings
■Can be used for bulkhead
and unmated MTP/MPO
cleaning
■Protective dust cover
doubles as an adapter cap
for cleaning unmated
connectors
■FOCIS 5-Type MTP/MPO
interface compliant
■Removes dust and oil
contamination
■Ideal solution for cleaning
parallel optics transceivers
MTP is a trademark of US Conec Ltd.
The MTP/MPO IBC
(In Bulkhead Cleaner) dry
cloth cleaner offered by
Tyco Electronics utilizes a
densely woven micro-fiber
cloth that cleans male (with
pins) or female MTP/MPO
connectors while in adapters,
bulkheads, faceplates, or
in unmated form with the
unique adapter/dust cover.
The unique cleaning cloth
also reduces static charge
making it one of the most
advanced cleaning systems
available for bulkhead opti-
cal connector cleaning.
Applications
For effective cleaning of:
■Male and female
MTP/MPO connectors
inside mating adapters
■Unmated male and female
MTP/MPO connectors
using included adapter
■Parallel optics
transceivers
■Networking gear includ-
ing switches and routers
■Factory or field connectors
Product Dimensions
Length — 184.2 mm [7.25 in.]
Width — 56.5 mm [2.22 in.]
Thickness — 22 mm [0.866 in.]
Adapter Length — 19.5 mm [0.759 in.]
OPTIPOP R Reel Cleaner
Product Facts
■Static attraction is
minimized
■Ultra clean micro-fiber cloth
captures debris and other
contamination
■Robust cloth does not fray
or leave fibrous material
behind
■Reduces the number of field
and test issues caused by
contaminated end faces
■High-end cost effective
cleaning solution
The OPTIPOP R dry cloth
cassette cleaners offered
by Tyco Electronics utilize a
densely woven micro-fiber
cloth that cleans fiber optic
connector tips while reduc-
ing static charge. This
makes them one of the most
advanced cleaning systems
available for optical connec-
tor cleaning.
Applications
A variety of reel cleaner
configurations allow for use
on the major optical con-
nector types including FC,
SC, ST, LC, MU, ODVA con-
forming, MT-RJ, and MPO.
Product Dimensions
Length — 127 mm [5.00 in.]
Width — 83 mm [3.26 in.]
Thickness — 48 mm [1.89 in.]
Weight — 150 g [0.33 lb.]
OPTIPOP is a trademark of
NTT Advanced Technology Corporation.
Description Part Number
MPO w/pins reel cleaner 1918802-1
One slot reel cleaner; 1.25 mm, 2.5 mm, MT No Pins 1918803-1
MT-RJ plug w/pins reel cleaner 1918804-1
Two slot reel cleaner; 1.25 mm and 2.5 mm 1918805-1
Reel cleaner refill (six per pack) 1918806-1
Reel Cleaner Refill (Six per Pack)
Part Number 1918806-1
Note: All part numbers are RoHS compliant.
97
Catalog 1307895 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 11-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 31-73-624-6639
Fiber Optic Products Catalog
Connectors/Adapters/
Tooling & Accessories
1
Tooling (Continued)
OPTIPOP C Card Cleaner
Product Facts
■Static attraction is
minimized
■Ultra clean micro-fiber cloth
captures debris and other
contamination
■Robust cloth does not fray
or leave fibrous material
behind
■Reduces the number of field
and test issues caused by
contaminated end faces
■Compact size The compact OPTIPOP C
dry cloth card cleaner
offered by Tyco Electronics
utilizes a densely woven
micro-fiber cloth that cleans
fiber optic connector tips
while reducing static charge.
This makes it one of the
most advanced cleaning
systems available for optical
connector cleaning.
Applications
The card cleaner can be
used on major optical con-
nector types including FC,
SC, ST, LC, MU, LC, ODVA,
MT-RJ*, and MPO*.
*Without guide pins installed.
Product Dimensions
Length — 120 mm [4.72 in.]
Width — 57 mm [2.24 in.]
Thickness — 16 mm [0.63 in.]
Weight — 60 g [0.13 lb.]
OPTIPOP is a trademark of
NTT Advanced Technology Corporation.
Description Part Number
Fiber connector card cleaner 1918810-1
Card cleaner refill (ten per pack) 1918811-1
Card Cleaner Refill (Ten per Pack)
Part Number 1918811-1
NEOCLEAN Stick Cleaner
Product Facts
■Perforated handle for
customizing length and
angle
■Ultra clean micro-fiber cloth
captures debris and other
contamination while
minimizing static attraction
■Robust cloth does not fray
or leave fibrous material
behind
■Reduces the number of field
and test issues caused by
contaminated end faces
■Convenient packaging
The NEOCLEAN dry cloth
stick cleaners offered by
Tyco Electronics utilize a
densely woven micro-fiber
cloth that cleans fiber optic
connector tips while reduc-
ing static charge. This
makes them one of the most
advanced cleaning systems
available for bulkhead opti-
cal connector cleaning.
Applications
The stick cleaners can be
used on major single fiber
optical connector types
inside bulkhead adapters
including FC, SC, ST, LC,
MU, LC ODVA, and MT-RJ
Jacks in addition to trans-
ceivers and lenses.
NEOCLEAN is a trademark of
NTT Advanced Technology Corporation.
2.5 mm
1.25 mm
Product Dimensions
Part Number 1918807-1
2.5 mm Stick Cleaner
Overall Length — 151.2 mm [5.95 in.]
Tip Diameter — 1.25 mm [0.049 in.]
Handle Diameter — 2.65 mm
[0.104 in.]
Tip Length — 12.6 mm [0.496 in.]
Part Number 1918808-1
1.25 mm Stick Cleaner
Overall Length — 151.2 mm [5.95 in.]
Tip Diameter — 2.5 mm [0.098 in.]
Handle Diameter — 2.65 mm
[0.104 in.]
Tip Length — 20.0 mm [0.787 in.]
Note: All part numbers are RoHS compliant.
98
Catalog 1307895 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 11-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 31-73-624-6639
Fiber Optic Products Catalog
Tooling (Continued)
PRO-CRIMPER III Hand Tool
Part Number
Connector Cable Jacket Hand Tool Hand Tool Die Set
Diameter (mm) w/ Die Set Only Only
FSMA 3.0 58551-1 58532-1 58552-1
(hex die)
ST Ceramic 3.0 58433-4 58532-1 58424-1
ST Stainless Steel 3.0 58433-4 58532-1 58424-1
ST Polymer Composite 3.0 58433-4 58532-1 58424-1
ST Ceramic Used with Loose Tube 3.8 — 58532-1 503890-1
ST Stainless Steel (504XXX series only) 3.0 58551-1 58532-1 58552-1
SC/FC (Polymer crimp body) 3.0 503911-1 58532-1 503910-1
2.4 & 3.0 492026-1 58532-1 492025-1
SC, FC (Metal crimp body) 1.6-2.0, 2.4 1588176-1 58532-1 1588175-1
SC/FC (Metal crimp body) 3.0 — 58532-1 492131-1
FSD - Ceramic DUALAN & LDD 58519-1 58532-1 58510-1
FSD - Polymer DUALAN & LDD 58519-1 58532-1 58510-1
FSD/MC - Ceramic DUALAN & LDD 58519-1 58532-1 58510-1
FSD Breakout Kit DUALAN & Protection Kit 58519-1 58532-1 58510-1
LIGHTCRIMP Plus and LIGHTCRIMP ST 3.0 492623-1 58532-2 492622-1
LIGHTCRIMP Plus and LIGHTCRIMP SC 3.0 492782-1 58532-2 492783-1
LIGHTCRIMP Plus LC 1.6 – 2.0 1754137-1 58532-2 1754136-1
MT-RJ Plug 1.8 1278632-1 58532-1 1278627-1
LC 3.0, 2-4, 1.6-2.0 1588176-1 58532-1 1588175-1
Polishing Bushing, Curing Sleeves and Strip Card Kits
Part Number
Connector Cable Jacket Polishing Curing Strip
Diameter (mm) Bushing Sleeves/Pieces Card Kit
FSMA 3.0 228025-1 502249-1 (12 pcs.) 501818-1
ST
Ceramic, Stainless Steel3.0 503337-1 (Metal) 502259-1 (12 pcs.) 501818-1
503304-1 (Black Polymer)
Polymer Composite 3.0 503304-2 (Beige Polymer) 502259-1 (12 pcs.) 501818-1
FC 3.0 504862-1 502862-2 (6 pcs.) 1754636-1
SC 3.0 502631-1 (Black Polymer) 502656-1 (1 pc.) 1754636-1
LC 1754074-1 (Metal) 1457630-X1(12 pcs.) 1588756-1
1918196-1 (Black Polymer)
FSD - Ceramic & Polymer DUALAN & LDD 501795-1* 502023-1** 501818-1
* Curing Assembly Kit with polishing bushing.
** Curing Assembly Kit without polishing bushing.
1-1 LC 900 µm
-2 LC jacketed cable
Note: All part numbers are RoHS compliant.
Hand Tools
PRO-CRIMPER III Hand Tool
Instruction Sheet 408-4020
http://www.tycoelectronics.com/documents
