PS2913-1-F3-AX - RENESAS TECHNOLOGY

R08DS0113EJ0200 Rev.2.00 Page 1 of 12

Jan 21, 2016

The mark <R> shows major revised points.

The revised points can be easily searched by copying an "<R>" in the PDF file and specifying it in the "Find what:" field.

PIN CONNECTION

(Top View)

1. Anode

2. Cathode

3. Emitter

4. Collector

Data Sheet

PS2913-1

SINGLE Tr. OUTPUT, HIGH COLLECTOR TO EMITTER VOLTAGE

4-PIN ULTRA SMALL FLAT-LEAD

PHOTOCOUPLER

DESCRIPTION

The PS2913-1 is an optically coupled isolator containing a GaAs light emitting diode and an NPN silicon

phototransistor in one package for high density mounting applications.

An ultra small flat-lead package has been provided which realizes a reduction in mounting area of about 30% compared

with the PS28xx series.

FEATURES

 Ultra small flat-lead package (4.6 (L)  2.5 (W)  2.1 (H) mm)

 High collector to emitter voltage (VCEO = 120 V)

 High isolati on vol t a ge (BV = 2 500 Vr.m .s.)

 Ordering number of taping product: PS2913-1-F3: 3 500 pcs/reel

 Safety standards

 UL approved: UL1577, Singl e prot ect i o n

 BSI approved: BS EN 62368-1, Supplementary insulation

 VDE approved: DIN EN 60747-5-5 (Option)

APPLICATIONS

 DC/DC converter

 Modem/PC card

R08DS0113EJ0200

Rev.2.00

Jan 21, 2016

<R>

PS2913-1e

R08DS0113EJ0200 Rev.2.00 Page 2 of 12

Jan 21, 2016

PACKAGE DIMENSIONS (UNIT: mm)

5.0±0.2

0.15+0.1

–0.05

1.27

2.1 MAX.

0.4±0.1

2.5±0.3

4.6±0.2

0.2±0.1

4.1 MIN.

MARKING EXAMPLE

Assembly lot

Week assembled

No. 1 pin

mark

(Nicked

corner)

Company initial

(Engraved R)

601

*1 Bar : Pb-Free

Year Assembled

(Last 1 Digit)

Ni/Pd/Au PLATING

Last number of

type No. : 13

PHOTOCOUPLER CONSTRUCTION

Parameter MIN.

Air Distance 4 mm

Creepage Distance 4 mm

Isolation Distance 0.4 mm

PS2913-1e

R08DS0113EJ0200 Rev.2.00 Page 3 of 12

Jan 21, 2016

ORDERING INFORMATION

Part Number Order Number Solder Plating

Specification Packing Style Safety Standard

Approval Application

Part

Number*1

PS2913-1 PS2913-1-AX Pb-Free 50 pcs (Tape 50 pcs cut) Standard products PS2913-1

PS2913-1-F3 PS2913-1-F3-

AX (Ni/Pd/Au) Embossed Tape 3 500

pcs/reel (UL, BSI approved)

PS2913-1-V PS2913-1-V-AX 50 pcs (Tape 50 pcs cut) UL, BSI approved

DIN EN 60747-5-5

PS2913-1-V-F3 PS2913-1-V-F3-

AX Embossed Tape 3 500

pcs/reel (VDE 0884-5)

approved (Option)

Note: *1. For the application of the Safet y Standard, following part number should be used.

ABSOLUTE MAXIMUM RATINGS (TA = 25C, unless otherwise specified)

Parameter Symbol Ratings Unit

Diode Forward Current IF 50 mA

Forward Current Derating



IF/C 0.5 mA/C

Peak Forward Current *1 IFP 0.5 A

Power Dissipation PD 60 mW

Reverse Voltage VR 6 V

Detector Collector to Emitter Voltage VCEO 120 V

Emitter to Collector Voltage VECO 6 V

Collector Current IC 30 mA

Power Dissipation Derating



PC/C 1.2 mW/C

Power Dissipation PC 120 mW

Isolation Voltage *2 BV 2 500 Vr.m.s.

Total Power Dissipation PT 160 mW

Operating Ambient Temperature TA 55 to +100 C

Storage Temperature Tstg 55 to +150 C

Notes: *1. PW = 100



s, Duty Cycle = 1%

*2. AC voltage for 1 minute at TA = 25C, RH = 60% bet ween in put and output.

Pins 1-2 shorted together, 3-4 shorted together.

<R>

PS2913-1e

R08DS0113EJ0200 Rev.2.00 Page 4 of 12

Jan 21, 2016

ELECTRICAL CHARACTERISTICS (TA = 25C)

Parameter Symbol Conditions MIN. TYP. MAX. Unit

Diode Forward Voltage VF I

F = 1 mA 0.9 1.1 1.3 V

Reverse Current IR V

R = 5 V 5



Terminal Capacitance Ct V = 0 V, f = 1 MHz 15 pF

Transistor Collector to Emitter Dark

Current ICEO I

F = 0 mA, VCE = 120V 100 nA

Coupled Current Transfer Ratio

(IC/IF) *1 CTR IF = 1 mA, VCE = 5 V 50 100 200 %

Collector Saturation

Voltage VCE(SAT) IF = 1 mA, IC = 0.2 mA 0.13 0.3 V

Isolation Resistance RI-O V

I-O = 1 kVDC 1011 

Isolation Capacitance CI-O V = 0 V, f = 1 MHz 0.4 pF

Rise Time *2 tr V

CC = 5 V, IC = 2 mA, RL = 100  10



Fall Time *2 tf

Turn-on Time *2 ton V

CC = 5 V, IF = 1 mA, RL = 5 k 80



Storage Time *2 ts 5

Turn-off Time *2 toff 50

Notes: *1. CTR rank

N : 50 to 200 (%)

K : 100 to 200 (%)

L : 75 to 150 (%)

M : 50 to 100 (%)

*2. Test circuit for switching time

Input

Output

90%

10%

OUT

Pulse Input

In monitor

PW = 100

Duty cycle = 1/10

PS2913-1e

R08DS0113EJ0200 Rev.2.00 Page 5 of 12

Jan 21, 2016

TYPICAL CHARACTERISTICS (TA = 25C, unless otherwise specified)

Ambient Temperature T

(°C)

Maximum Forward Current I

(mA)

MAXIMUM FORWARD CURRENT vs.

AMBIENT TEMPERATURE

Ambient Temperature T

(°C)

Transistor Power Dissipation P

(mW)

TRANSISTOR POWER DISSIPATION

vs. AMBIENT TEMPERATURE

Forw ard V oltage V

(V)

Forward Current I

(mA)

FORWARD CURRENT vs.

FOR W ARD VOLTAGE

Collector to Emitter Voltage V

(V)

Collector Current I

(mA)

COLLECTOR CURRENT vs.

COLLECT OR T O EMITTER V OLTAGE

Ambient Temperature T

(°C)

Collector to Emitter Dark Current I

CEO

(nA)

COLLECTOR TO EMITTER DARK

CURRENT vs. AMBIENT TEMPERATURE

Collector Saturation Voltage VCE(sat) (V)

Collector Current I

(mA)

COLLECTOR CURRENT vs.

COLLECTOR SATURATION VOLTAGE

025 50 75 100

0.5 mA/°C

140

100

120

25 50 75 100 12

100

0.1

0.01

0.0 0.5 1.0 1.5 2.0

0°C

–25°C

–50°C

+60°C

+25°C

= +100°C

50 000

0.1

500

5 000

10 000

1 000

100

0.5

–60 0 40 80–40 –20 20 60 100

= 40 V

24 V

10 V

6842010

21 mA

0.5 mA

12 I

= 5 mA

2 mA

CTR = 100%

0.1

0.0 0.2 0.4 0.6 0.8 1

1 mA

= 0.5 mA

2 mA

5 mA

CTR = 100%

Remark The graphs indicate nominal characteristics.

PS2913-1e

R08DS0113EJ0200 Rev.2.00 Page 6 of 12

Jan 21, 2016

FREQUENCY RESPONSE

Frequency f (kHz)

Normalized Gain Gv

Forward Current I

(mA)

Current Transfer Ratio CTR (%)

CURRENT TRANSFER RATIO vs.

FORWARD CURRENT

Normalized to 1.0

at T

= 25°C,

= 1 mA, V

= 5 V

Ambient Temperature T

(°C)

Normalized Current Transfer Ratio CTR

NORMALIZED CURRENT TRANSFER

RATIO vs. AMBIENT TEMPERATURE

Switching Time t ( s)



Load Resistance R

()

SWITCHING TIME vs.

LOAD RESISTANCE

1.2

1.4

–50

1.0

0.8

0.6

0.4

0.2

0.0 –25 025

50 75 100 0.1 110 10

100

150

200

250

300

100

1 000

10 000

= 5 V,

n = 3

1k 10k 100 k 1 000 k

Sample A

1.2

0.4

0.0

0.8

0.6

0.2

1.0

= 1 k

510 

300 

100 

1100.5 50 1005

= 1 mA,

= 5 V,

CTR = 120%

off

Remark The graphs indicate nominal characteristics.

PS2913-1e

R08DS0113EJ0200 Rev.2.00 Page 7 of 12

Jan 21, 2016

TAPING SPECIFICATIONS (UNIT: mm)

PS2913-1-F3

1.55±0.05

4.0±0.1

2.0±0.05

4.0±0.1

1.75±0.1

2.9 MAX.

0.3

2.9±0.1 2.4±0.1

1.5

+0.1

–0

5.3±0.1

5.5±0.05

12.0±0.2

Tape Direction

Outline and Dimensions (Tape)

Outline and Dimensions (Reel)

Packing: 3 500 pcs/reel

330±2.0

100±1.0

2.0±0.5

21.0±0.8

2.0±0.5

13.5±1.0

13.0±0.2

RRRR

PS2913-1e

R08DS0113EJ0200 Rev.2.00 Page 8 of 12

Jan 21, 2016

RECOMMENDED MOUNT PAD DIMENSIONS (UNIT: mm)

4.14

(0.35)

4.7

5.7

1.27

0.8

0.6

24-R0.1

( ) : Reference value

Remark This drawing is consid ered to meet air and outer creepage distance 4.0 mm minimum. Al l dimensions in

this figure must be evaluated before use.

PS2913-1e

R08DS0113EJ0200 Rev.2.00 Page 9 of 12

Jan 21, 2016

NOTES ON HANDLING

1. Recommended soldering conditions

(1) Infrared reflow soldering

• Peak reflow temperature 260C or below (package surface temperature)

• Time of peak reflow temperature 10 seconds or less

• Time of temperature higher than 220C 60 seconds or less

• Time to preheat temperature from 120 to 180C 12030 s

• Number of reflows Three or less

• Flux Rosin flux containing small amount of chlorine (The flux

with a maximum chlorine content of 0.2 Wt% or less is

recommended.)

220˚C

Package Surface Temperature T (˚C)

Time (s)

(heating)

to 10 s

to 60 s

260˚C MAX.

Recommended Temperature Profile of Infrared Reflow

120±30 s

(preheating)

180˚C

120˚C

(2) Wave soldering

• Temperature 260C or below (molten solder temperature)

• Time 10 seconds or less

• Preheating conditions 120C or below (package surface temperature)

• Nu mber of times One (Allowed to be dipped in solder including plastic mold portion.)

• Flux Rosin flux containing small amount of chlorine (The flux with a maximum

chlorine content of 0.2 Wt% or less is recommended.)

(3) Soldering by Soldering Iron

• Peak Temperature (lead part temperature) 350C or below

• Time (each pin) 3 seconds or less

• Flux Rosin flux containing small amount of chlorine (The flux with a

maximum chlorine content of 0.2 Wt% or less is recommen ded.)

(a) Soldering of leads should be made at the point 1.5 to 2.0 mm from the root of the lead

(4) Cautions

• Fluxes

Avoid removing the residual flux with freon-based and chlorine-based cleaning solven t.

PS2913-1e

R08DS0113EJ0200 Rev.2.00 Page 10 of 12

Jan 21, 2016

2. Cautions Regarding Noise

Be aware that when voltage is applied suddenly between the photocoupler’s input and output or between collector-

emitters at startup, the output transistor may enter the on state, even if the voltage is within the absolute maximum

ratings.

3. Measurement conditions of current tran sfer ratios (CTR), which differ according to photocoupler

Check the setting values before use, since the forward current conditions at CTR measurement differ according to

product.

When using products other than at the specified forward current, the characteristics curves may differ from the

standard curves due to CTR value variations or the like. Therefore, check the characteristics under the actual

operating conditions and thoroughly take variations or the like into consideration before use.

USAGE CAUTIONS

1. Protect against static electricity when handling.

2. Avoid storage at a high temperature and high humidity.

PS2913-1e

R08DS0113EJ0200 Rev.2.00 Page 11 of 12

Jan 21, 2016

SPECIFICATION OF VDE MARKS LICENSE DOCUMENT

Parameter Symbol Spec. Unit

Climatic test class (IEC 60068-1/DIN EN 60068-1) 55/100/21

Dielectric strength

maximum operating isolati on voltage

Test voltage (partial discharge test, procedure a for type test and

random test)

Upr = 1.6  UIORM, Pd  5 pC

UIORM

Upr

570

912

Vpeak

Test voltage (partial discharge test, procedure b for all devic es)

Upr = 1.875  UIORM, Pd  5 pC Upr 1 068 Vpeak

Highest permissible overvoltage UTR 4 000 Vpeak

Degree of pollution (DIN EN 60664-1 VDE0 110 Part 1) 2

Comparative tracking index (IEC 601 12/DIN EN 60112 (VDE 0303

Part 11)) CTI 175

Material group (DIN EN 60664-1 VDE0110 Part 1) III a

Storage temperature range Tstg –55 to +150 C

Operating temperature range TA –55 to +100 C

Isolation resistance, minimum value

VIO = 500 V dc at TA = 25C

VIO = 500 V dc at TA MAX. at least 100C

Ris MIN.

1012

1011



Safety maximum ratings (maximum permissible in case of fault, see

thermal derating curve)

Package temperature

Current (input current IF, Psi = 0)

Power (output or total power dissipation)

Isolation resistance

VIO = 500 V dc at TA = Tsi

Tsi

Isi

Psi

Ris MIN.

150

300

500

109

C



PS2913-1e

R08DS0113EJ0200 Rev.2.00 Page 12 of 12

Jan 21, 2016

Caution GaAs Products This product uses gallium arsenide (GaAs).

GaAs vapor and powder are hazardous to human health if inhaled or ingested, so please observe

the following points.

• Follow related laws and ordinances when disposing of the product. If there are no applicable laws

and/or ordinances, dispose of the product as recommended below.

1. Commission a disposal company able to (with a license to) collect, transport and dispose of

materials that contain arsenic and other such industrial waste materials.

2. Exclude the product from general industrial waste and household garbage, and ensure that the

product is controlled (as industrial waste subject to special control) up until final disposal.

• Do not burn, destroy, cut, crush, or chemically dissolve the product.

• Do not lick the product or in any way allow it to enter the mouth.

All trademarks and registered trademarks are t he property of their respective owners.

C - 1

Revision History PS2913-1 Data Sheet

Rev. Date Description

Page Summary

3.00 May , 2006  First edition issued

1.00 Nov 29, 2013 Throughout Renesas format is applied to this data sheet.

p.1 Modification of FEATURES

p.2 Modification of PACKAGE DIMENSIONS

Modification of MARKING EXAMPLE

p.3 Modification of ORDERING INFORMATION

p.4 Modification of ELECT RICAL CHARACTERISTICS

p.6 Modification of T Y PICAL CHARACTERISTICS

p.7 Modification of TAPING SPECIFICATIONS

p.9 Modification of NOT E S ON HANDLING

p.11 Addition of SPECIFICATION OF VDE MARKS LICENSE DOCUMENT

2.00 Jan 21, 2016 p.1 Update of F EATURES - Safety standards

p.3 Modification of ORDERING INFORMATION

Notice

1. Descriptions of circuits, software and other related information in this document are provided only to illustrate the operation of semiconductor products and application examples. You are fully responsible for

the incorporation of these circuits, software, and information in the design of your equipment. Renesas Electronics assumes no responsibility for any losses incurred by you or third parties arising from the

use of these circuits, software, or information.

2. Renesas Electronics has used reasonable care in preparing the information included in this document, but Renesas Electronics does not warrant that such information is error free. Renesas Electronics

assumes no liability whatsoever for any damages incurred by you resulting from errors in or omissions from the information included herein.

3. Renesas Electronics does not assume any liability for infringement of patents, copyrights, or other intellectual property rights of third parties by or arising from the use of Renesas Electronics products or

technical information described in this document. No license, express, implied or otherwise, is granted hereby under any patents, copyrights or other intellectual property rights of Renesas Electronics or

others.

4. You should not alter, modify, copy, or otherwise misappropriate any Renesas Electronics product, whether in whole or in part. Renesas Electronics assumes no responsibility for any losses incurred by you or

third parties arising from such alteration, modification, copy or otherwise misappropriation of Renesas Electronics product.

5. Renesas Electronics products are classified according to the following two quality grades: "Standard" and "High Quality". The recommended applications for each Renesas Electronics product depends on

the product's quality grade, as indicated below.

"Standard": Computers; office equipment; communications equipment; test and measurement equipment; audio and visual equipment; home electronic appliances; machine tools; personal electronic

equipment; and industrial robots etc.

"High Quality": Transportation equipment (automobiles, trains, ships, etc.); traffic control systems; anti-disaster systems; anti-crime systems; and safety equipment etc.

Renesas Electronics products are neither intended nor authorized for use in products or systems that may pose a direct threat to human life or bodily injury (artificial life support devices or systems, surgical

implantations etc.), or may cause serious property damages (nuclear reactor control systems, military equipment etc.). You must check the quality grade of each Renesas Electronics product before using it

in a particular application. You may not use any Renesas Electronics product for any application for which it is not intended. Renesas Electronics shall not be in any way liable for any damages or losses

incurred by you or third parties arising from the use of any Renesas Electronics product for which the product is not intended by Renesas Electronics.

6. You should use the Renesas Electronics products described in this document within the range specified by Renesas Electronics, especially with respect to the maximum rating, operating supply voltage

range, movement power voltage range, heat radiation characteristics, installation and other product characteristics. Renesas Electronics shall have no liability for malfunctions or damages arising out of the

use of Renesas Electronics products beyond such specified ranges.

7. Although Renesas Electronics endeavors to improve the quality and reliability of its products, semiconductor products have specific characteristics such as the occurrence of failure at a certain rate and

malfunctions under certain use conditions. Further, Renesas Electronics products are not subject to radiation resistance design. Please be sure to implement safety measures to guard them against the

possibility of physical injury, and injury or damage caused by fire in the event of the failure of a Renesas Electronics product, such as safety design for hardware and software including but not limited to

redundancy, fire control and malfunction prevention, appropriate treatment for aging degradation or any other appropriate measures. Because the evaluation of microcomputer software alone is very difficult,

please evaluate the safety of the final products or systems manufactured by you.

8. Please contact a Renesas Electronics sales office for details as to environmental matters such as the environmental compatibility of each Renesas Electronics product. Please use Renesas Electronics

products in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances, including without limitation, the EU RoHS Directive. Renesas Electronics assumes

no liability for damages or losses occurring as a result of your noncompliance with applicable laws and regulations.

9. Renesas Electronics products and technology may not be used for or incorporated into any products or systems whose manufacture, use, or sale is prohibited under any applicable domestic or foreign laws or

regulations. You should not use Renesas Electronics products or technology described in this document for any purpose relating to military applications or use by the military, including but not limited to the

development of weapons of mass destruction. When exporting the Renesas Electronics products or technology described in this document, you should comply with the applicable export control laws and

regulations and follow the procedures required by such laws and regulations.

10. It is the responsibility of the buyer or distributor of Renesas Electronics products, who distributes, disposes of, or otherwise places the product with a third party, to notify such third party in advance of the

contents and conditions set forth in this document, Renesas Electronics assumes no responsibility for any losses incurred by you or third parties as a result of unauthorized use of Renesas Electronics

products.

11. This document may not be reproduced or duplicated in any form, in whole or in part, without prior written consent of Renesas Electronics.

12. Please contact a Renesas Electronics sales office if you have any questions regarding the information contained in this document or Renesas Electronics products, or if you have any other inquiries.

(Note 1) "Renesas Electronics" as used in this document means Renesas Electronics Corporation and also includes its majority-owned subsidiaries.

(Note 2) "Renesas Electronics product(s)" means any product developed or manufactured by or for Renesas Electronics.

http://www.renesas.com

Refer to "http://www.renesas.com/" for the latest and detailed information.

California Eastern Laboratories, Inc.

4590 Patrick Henry Drive, Santa Clara, California 95054-1817, U.S.A.

Tel: +1-408-919-2500, Fax: +1-408-988-0279

Renesas Electronics Europe Limited

Dukes Meadow, Millboard Road, Bourne End, Buckinghamshire, SL8 5FH, U.K

Tel: +44-1628-585-100, Fax: +44-1628-585-900

Renesas Electronics Europe GmbH

Arcadiastrasse 10, 40472 Düsseldorf, Germany

Tel: +49-211-6503-0, Fax: +49-211-6503-1327

Renesas Electronics (China) Co., Ltd.

Room 1709, Quantum Plaza, No.27 ZhiChunLu Haidian District, Beijing 100191, P.R.China

Tel: +86-10-8235-1155, Fax: +86-10-8235-7679

Renesas Electronics (Shanghai) Co., Ltd.

Unit 301, Tower A, Central Towers, 555 Langao Road, Putuo District, Shanghai, P. R. China 200333

Tel: +86-21-2226-0888, Fax: +86-21-2226-0999

Renesas Electronics Hong Kong Limited

Unit 1601-1611, 16/F., Tower 2, Grand Century Place, 193 Prince Edward Road West, Mongkok, Kowloon, Hong Kong

Tel: +852-2265-6688, Fax: +852 2886-9022

Renesas Electronics Taiwan Co., Ltd.

13F, No. 363, Fu Shing North Road, Taipei 10543, Taiwan

Tel: +886-2-8175-9600, Fax: +886 2-8175-9670

Renesas Electronics Singapore Pte. Ltd.

80 Bendemeer Road, Unit #06-02 Hyflux Innovation Centre, Singapore 339949

Tel: +65-6213-0200, Fax: +65-6213-0300

Renesas Electronics Malaysia Sdn.Bhd.

Unit 1207, Block B, Menara Amcorp, Amcorp Trade Centre, No. 18, Jln Persiaran Barat, 46050 Petaling Jaya, Selangor Darul Ehsan, Malaysia

Tel: +60-3-7955-9390, Fax: +60-3-7955-9510

Renesas Electronics India Pvt. Ltd.

No.777C, 100 Feet Road, HAL II Stage, Indiranagar, Bangalore, India

Tel: +91-80-67208700, Fax: +91-80-67208777

Renesas Electronics Korea Co., Ltd.

12F., 234 Teheran-ro, Gangnam-Gu, Seoul, 135-080, Korea

Tel: +82-2-558-3737, Fax: +82-2-558-5141

SALES OFFICES

Colophon 5.0