Amphenol /Matrix
MIL-C-26482, Series 2 Connectors
12-071-1
Amphenol
® ®
inside front cover
This page is blank
1
This catalog covers the Amphenol ®/Matrix ® MIL-C-
26482, Series 2 Connectors. These connectors are
bayonet coupling type, and they feature crimp contacts
that are rear insertable and rear releasable. They can
be ordered through Amphenol, by military or equiva-
lent proprietary part numbers.
The Matrix ® connectors covered in this catalog
broaden the miniature cylindrical family offered by
Amphenol, so that now users have the broadest range
of product available to them. Additional miniature cylin-
dricals are covered in the Amphenol catalog, 12-070,
which is available upon request. The 12-070 Amphe-
nol® catalog covers a large variety of miniature cylindri-
cals including the following:
MIL-C-26482, Series 1 - bayonet coupling connec-
tors with solder contacts
MIL-C-26482, Series 1 - bayonet coupling connec-
tors with front release crimp contacts
Other proprietary crimp and solder types including
hermetics and connectors with printed circuit board
contacts, as well as other shell styles, alternative
connector finishes and additional contact options
Additional miniature cylindricals that have double
stub threaded coupling rather than bayonet coupling
See page 15 for more information on these additional
miniature cylindrical connector products.
Also, ask for these Amphenol Product Catalogs:
Amphenol Industrial Connector Brochure, SL-381,
for an overview of the industrial family of connec-
tors.
Amphenol Brochure SL-100, which provides an
overview of all products, military and industrial,
offered through Amphenol Aerospace.
Should more information be required concerning the
connectors covered in this publication, or if special
application needs arise, please contact:
Amphenol Corporation
Amphenol Aerospace
40-60 Delaware Avenue
Sidney, New York 13838-1395
Telephone 607-563-5011
Fax: 607-563-5157
Web site: www.Amphenol-Aerospace.com
TABLE OF CONTENTS
Amphenol ®/Matrix ® MIL-C-26482, Series 2
Connectors
Introduction, Table of Contents . . . . . . . . . . . . . . . . . .1
General Description, Features and Benefits. . . . . . . .2
Class Descriptions, Performance Specifications . . . .3
Shell Styles, Dimensional Data:
Wall Mounting Receptacle, Narrow Flange . . . . . .4
Wall Mounting Receptacle, Wide Flange . . . . . . . .5
Cable Connecting Receptacle,. . . . . . . . . . . . . . . .6
Jam Nut Receptacle. . . . . . . . . . . . . . . . . . . . . . . .7
Straight Plug,
Straight Plug with RFI Grounding Fingers . . . . . . .8
Insert Arrangement Chart,
Insert Alternate Positions . . . . . . . . . . . . . . . . . . . . . .9
Insert Arrangement Patterns . . . . . . . . . . . . . . . 10-12
Contact Information, Sealing Plugs,
Crimping and Insertion/Removal Tools . . . . . . . . . . .13
How to Order . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14
Additional MIL-C-26482/Miniature Cylindrical
Connectors offered by Amphenol . . . . . . . . . . . . . . .15
Sales Office Listing
Amphenol Aerospace is a Certified ISO 9001 Manufacturer.
2
MS3470
wall mounting receptacle
with narrow flange
MS3472
wall mounting receptacle
with wide flange
MS3471
cable connecting receptacle
MS3474
jam nut receptacle
MS3476
straight plug
MS3475
plug with RFI grounding
fingers
Amphenol broadens their Miniature Cylindrical Family of
Connectors with the addition of the Matrix® Product line
of MIL-C-26482, Series 2 connectors.
This series provides a bayonet coupling connector with crimp
rear insertable, rear releasable contacts.
DESIGN CHARACTERISTICS
Medium size, environmentally resistant connector
Recommended operating voltage to 1,000 VAC (RMS)
at sea level
Quick positive coupling assured by 3 point bayonet
coupling system
Visual confirmation of complete coupling
Eliminates mismating by the use of five key/keyway design
Insertion and removal of contacts from the rear of the con-
nector assures no damage to the front that might affect the
sealing characteristics
Utilizes same standard qualified rear-release type plastic
tool for contact insertion and removal
Contacts are qualified to MIL-C-39029 requirements – BIN
coded (three color bands), and are crimped with standard
crimp tools per MIL-C-22520
Grommets are constructed of tear-resistant elastomer and
experience no degradation when exposed to a broad range
of fluids
Sealing over a range of wire diameters is assured by a tri-
ple webbed grommet at the rear of the connector
Closed entry socket side of the insert is designed with a
lead-in chamfer and a hard face that will accept a pin con-
tact bent within pre-established limits
Elastomer interfacial seal on the pin side has raised barri-
ers around each pin which displace into the socket chamfer
when mated, providing a positive moisture seal
CUSTOMER OPTIONS
Shell styles within this family include:
Wall mount with either a narrow or a wide flange, jam nut
single hole mount, and cable connecting receptacles,
along with standard plugs or plugs with RFI grounding fin-
gers, in shell sizes 8 to 24
MS and Proprietary versions available
Accommodation of contact sizes 20, 16 and 12
34 insert arrangement patterns available, accommodating
from a minimum of 3 to a maximum of 55 circuits
Alternate positioning available
Various finishes are available (for information on non-cad-
mium zinc alloy plating, consult Amphenol, Sidney, NY)
Amphenol /Matrix Miniature Cylindrical
MIL-C-26482, Series 2 Connectors
® ®
3
Amphenol /Matrix Miniature Cylindrical
MIL-C-26482, Series 2 Connectors
class descriptions, performance specifications
® ®
CLASS DESCRIPTIONS
* Ref. MIL-C-26482
Military
MIL-C-26482, Series 2
Amphenol/Matrix
Proprietary MB1 Series Description
Class L Class R Aluminum shell, electroless nickel finish, fluid resistant
Class E Inactive, superceded by Class L*
Class R Inactive, superceded by Class L*
Class A Class A Aluminum shell, black non-conductive anodized finish, fluid
resistant
Class G Stainless steel shell, passivated, fluid resistant
Class W Class W Aluminum shell, olive drab cadmium plated, corrosion/fluid
resistant
PERFORMANCE SPECIFICATIONS
** Service Rating is comparable to MS rating A. Miniature connectors rated Service Rating I will provide a minimum flashover
voltage at sea level of 2,000 volts AC (RMS). Service Rating II is comparable to MS Service Rating D, and will provide a
minimum flashover voltage of 2,800 volts AC (RMS) at sea level.
Please note that the electrical data given is not an establishment of electrical safety factors. This is left entirely in the
designer’s hands, as he can best determine which peak voltage, switching surges, transients, etc. can be expected in a
particular circuit.
SERVICE RATINGS**
Service
Rating
Recommended
Operating AC Voltage
at Sea Level
Test Voltage AC (RMS), 60 cps
Sea Level 50,000 ft. 70,000 ft. 110,000 ft.
I 600 1,500 500 375 200
II 1,000 2,300 750 500 200
OPERATING TEMPERATURE RANGE
–65°C (–85°F) to 200°C (392°F)
ENVIRONMENTAL SEAL
Wired, mated connectors with the specified accessory
attached will meet the altitude immersion test specified in
MIL-C-26482.
DURABILITY
Minimum of 500 mating cycles.
SHOCK AND VIBRATION REQUIREMENTS
When tested as follows, the connector shall sustain no
physical damage, or electrical discontinuity exceeding
one microsecond.
SHOCK:
Pulse of an approximate half sine wave of 300g magnitude
with duration of 3 milliseconds applied in three axes.
VIBRATION:
Sixteen hours of random vibration having a range of 50 to
2,000 Hz with a 41.7G peak level.
4
Receptacle Shell, Wall Mount with Narrow Flange,
Bayonet Coupling
Military No. MS3470
Amphenol/Matrix No. MB10
To complete order number see how to order, page 14.
Shell
Size
A
Max.
B
±.005
C Dia.
±.003
D Dia.
Max. E
F
±.016
H
Accessory Thread
Class 2A
T
±.005
8 .828 .594 .471 .305 .462/.431 .062 .5000-20 UNF .120
10 .954 .719 .588 .405 .462/.431 .062 .6250-24 UNEF .120
12 1.047 .812 .748 .531 .462/.431 .062 .7500-20 UNEF .120
14 1.141 .906 .873 .665 .462/.431 .062 .8750-20 UNEF .120
16 1.234 .969 .998 .790 .462/.431 .062 1.0000-20 UNEF .120
18 1.328 1.062 1.123 .869 .462/.431 .062 1.0625-18 UNEF .120
20 1.453 1.156 1.248 .994 .587/.556 .094 1.1875-18 UNEF .120
22 1.578 1.250 1.373 1.119 .587/.556 .094 1.3125-18 UNEF .120
24 1.703 1.375 1.498 1.244 .620/.589 .094 1.4375-18 UNEF .147
Miniature Cylindrical MIL-C-26482, Series 2
MS3470
wall mounting receptacle with narrow flange
5
Receptacle Shell, Wall Mount with Wide Flange,
Bayonet Coupling
Military No. MS3472
Amphenol/Matrix No. MB11
To complete order number see how to order, page 14.
Shell
Size
A
Max.
B
±.005
C Dia.
±.003
D Dia.
Max. E
F
±.016
H Thread
Class 2A
8 1.065 .734 .471 .305 .493/.462 .062 .5000-20 UNF
10 1.141 .812 .588 .405 .493/.462 .062 .6250-24 UNEF
12 1.266 .938 .748 .531 .493/.462 .062 .7500-20 UNEF
14 1.360 1.031 .873 .665 .493/.462 .062 .8750-20 UNEF
16 1.453 1.125 .998 .790 .493/.462 .062 1.0000-20 UNEF
18 1.532 1.203 1.123 .869 .493/.462 .062 1.0625-18 UNEF
20 1.688 1.297 1.248 .994 .587/.556 .094 1.1875-18 UNEF
22 1.766 1.375 1.373 1.119 .587/.556 .094 1.3125-18 UNEF
24 1.891 1.500 1.498 1.244 .620/.589 .094 1.4375-18 UNEF
Miniature Cylindrical MIL-C-26482, Series 2
MS3472
wall mounting receptacle with wide flange
6
Receptacle Shell, Cable Connecting,
Bayonet Coupling
Military No. MS3471
Amphenol/Matrix No. MB13
To complete order number see how to order, page 14.
Shell
Size
A
Max.
B Dia.
±.020
C Dia.
±.003
D Dia.
Max. E
F
±.016
H Thread
Class 2A
8 .828 .938 .471 .305 .462/.431 .062 .5000-20 UNF
10 .954 1.062 .588 .405 .462/.431 .062 .6250-24 UNEF
12 1.047 1.156 .748 .531 .462/.431 .062 .7500-20 UNEF
14 1.141 1.250 .873 .665 .462/.431 .062 .8750-20 UNEF
16 1.234 1.344 .998 .790 .462/.431 .062 1.0000-20 UNEF
18 1.328 1.438 1.123 .869 .462/.431 .062 1.0625-18 UNEF
20 1.453 1.562 1.248 .994 .587/.556 .094 1.1875-18 UNEF
22 1.578 1.688 1.373 1.119 .587/.556 .094 1.3125-18 UNEF
24 1.703 1.812 1.498 1.244 .620/.589 .094 1.4375-18 UNEF
Miniature Cylindrical MIL-C-26482, Series 2
MS3471
cable connecting receptacle
7
Receptacle Shell, Jam Nut Mount,
Bayonet Coupling
Military No. MS3474
Amphenol/Matrix No. MB14
To complete order number see how to order, page 14.
Shell
Size
A
Max.
B
±.005
C Dia.
±.003
D Dia.
Max. E F
H
Accessory Thread
Class 2A
J
Mounting Thread
Class 2A
K
Max.
8 .954 .525 .471 .305 .707/.658 .113/.086 .5000-20 UNF .5625-24 UNEF .767
10 1.078 .650 .588 .405 .707/.658 .113/.086 .6250-24 UNF .6875-24 UNEF .892
12 1.266 .813 .748 .531 .707/.658 .113/.086 .7500-20 UNEF .8750-20 UNEF 1.079
14 1.391 .937 .873 .665 .707/.658 .113/.086 .8750-20 UNEF 1.0000-20 UNEF 1.205
16 1.516 1.061 .998 .790 .707/.658 .113/.086 1.0000-20 UNEF 1.1250-18 UNEF 1.329
18 1.641 1.186 1.123 .869 .707/.658 .113/.086 1.0625-18 UNEF 1.2500-18 UNEF 1.455
20 1.828 1.311 1.248 .994 .772/.721 .148/.096 1.1875-18 UNEF 1.3750-18 UNEF 1.579
22 1.954 1.436 1.373 1.119 .772/.721 .148/.096 1.3125-18 UNEF 1.5000-18 UNEF 1.705
24 2.078 1.561 1.498 1.244 .772/.721 .148/.096 1.4375-18 UNEF 1.6250-18 UNEF 1.829
Miniature Cylindrical MIL-C-26482, Series 2
MS3474
jam nut receptacle
8
Plug Shell,
Bayonet Coupling
Military No. MS3476
Amphenol/Matrix No. MB16
Plug Shell, RFI Grounding,
Bayonet Coupling
Military No. MS3475
Amphenol/Matrix No. MB18
To complete order number see how to order, page 14.
Shell
Size
A Dia.
Max.
B Dia.
Max.
H
Accessory Thread
Class 2A
8 .782 .305 .5000-20 UNF
10 .926 .405 .6250-24 UNEF
12 1.043 .531 .7500-20 UNEF
14 1.183 .665 .8750-20 UNEF
16 1.305 .790 1.0000-20 UNEF
18 1.391 .869 1.0625-18 UNEF
20 1.531 .994 1.1875-18 UNEF
22 1.656 1.119 1.3125-18 UNEF
24 1.777 1.244 1.4375-18 UNEF
Miniature Cylindrical MIL-C-26482, Series 2
MS3476 straight plug
MS3475 straight plug with RFI grounding fingers
9
Miniature Cylindrical MIL-C-26482, Series 2
insert arrangements, insert alternate positioning
INSERT ARRANGEMENTS
Insert
Arrangement
Service
Rating
Total
Contacts
Contact Size
12 16 20
8-33 I 3 3
8-98 I 3 3
10-6 I 6 6
12-3 II 3 3
12-8 I 8 8
12-10 I 10 10
14-4 I 4 4
14-5 I 5 5
14-9 I 9 4 5
14-12 I 12 4 8
14-15 I 15 1 14
14-18 I 18 18
14-19 I 19 19
16-8 II 8 8
16-23 I 23 1 22
16-26 I 26 26
18-8 I 8 8
18-11 II 11 11
18-30 I 30 1 29
18-32 I 32 32
20-16 II 16 16
20-24 I 24 24
20-39 I 39 2 37
20-41 I 41 41
22-12 I 12 12
22-19 I 19 19
22-21 II 21 21
22-32 I 32 32
22-41 I 41 14 27
22-55 I 55 55
22-95 I 32 6 26
24-19 II 19 19
24-31 I 31 31
24-61 I 61 61
Insert
Arrangement
Degrees
WX Y Z
8-33 90
8-98 ––––
10-6 90
12-3 180
12-8 90 112 203 292
12-10 60 155 270 295
14-4 45
14-5 40 92 184 273
14-9 15 90 180 270
14-12 43 90
14-15 17 110 155 234
14-18 15 90 180 270
14-19 30 165 315
16-8 54 152 180 331
16-23 158 270
16-26 60 275 338
18-8 180–––
18-11 62 119 241 340
18-30 18 193 285 350
18-32 85 138 222 265
20-16 238 318 333 347
20-24 70 145 215 290
20-39 63 144 252 333
20-41 45 126 225
22-12 ––––
22-19 15 90 225 308
22-21 16 135 175 349
22-32 72 145 215 288
22-41 39 135 264
22-55 30 142 226 314
22-95 26 180 266
24-19 30 165 315
24-31 90 225 255
24-61 90 180 270 324
INSERT ALTERNATE POSITIONING
To avoid cross-plugging problems in applications requiring the use of
more than one connector of the same size and arrangement, alter-
nate rotations are available as indicated in the chart below.
As shown in the diagram, the front face of the pin insert is rotated
within the shell in a clockwise direction from the normal shell key.
The socket insert would be rotated counter-clockwise the same
number of degrees in respect to the normal shell key.
Position W Position X Position Y Position Z
View looking into front face of pin insert or rear of socket insert.
10
front face of pin insert or rear face of socket insert illustrated
Miniature Cylindrical MIL-C-26482, Series 2
contact arrangements
Insert Arrangement 8-33 8-98 10-06 12-03 12-08 12-10
Service Rating I I I II I I
Number of Contacts 3 3 6 3 8 10
Contact Size 20 20 20 16 20 20
Insert Arrangement 14-04 14-05 14-09 14-12 14-15
Service Rating I II I I I
Number of Contacts 4 5 5 4 8 4 14 1
Contact Size 12 16 20 12 20 16 20 16
Insert Arrangement 14-18 14-19 16-08 16-23 16-26
Service Rating I I II I I
Number of Contacts 18 19 8 22 1 26
Contact Size 20 20 16 20 16 20
CONTACT LEGEND 20 16 12
11
front face of pin insert or rear face of socket insert illustrated
Miniature Cylindrical MIL-C-26482, Series 2
contact arrangements
Insert Arrangement 18-08 18-11 18-30 18-32
Service Rating I II I I
Number of Contacts 8 11 29 1 32
Contact Size 12 16 20 16 20
Insert Arrangement 20-16 20-24 20-39 20-41
Service Rating II I I I
Number of Contacts 16 24 37 2 41
Contact Size 16 20 20 16 20
Insert Arrangement 22-12 22-19 22-21
Service Rating I I II
Number of Contacts 12 19 21
Contact Size 12 12 16
CONTACT LEGEND 20 16 12
12
front face of pin insert or rear face of socket insert illustrated
Miniature Cylindrical MIL-C-26482, Series 2
contact arrangements
Insert Arrangement 22-32 22-41 22-55
Service Rating I I I
Number of Contacts 32 27 14 55
Contact Size 20 20 16 20
Insert Arrangement 22-95 24-19 24-31
Service Rating I II I
Number of Contacts 26 6 19 31
Contact Size 20 12 12 16
Insert Arrangement 24-61
Service Rating I
Number of Contacts 61
Contact Size 20
CONTACT LEGEND 20 16 12
13
Miniature Cylindrical MIL-C-26482, Series 2
contact information, sealing plugs,
crimping and insertion/removal tools
MIL-C-26482, SERIES 2
CRIMP CONTACTS
Contact
Size
Wire Range Socket Contacts Pin Contacts
AWG mm2
Military
Part Number
Amphenol/Matrix
Part Number
Military
Part Number
Amphenol/Matrix
Part Number
20 24-20 0.2-0.6 M39029/5-115 M5100-001-0020L M39029/4-110 M5000-054-0020L
16 20-16 0.5-1.4 M39029/5-116 M5100-001-0016L M39029/4-111 M5000-054-0016L
12 14-12 2-3 M39029/5-118 M5100-001-0012L M39029/4-113 M5000-054-0012L
* Organize individual circuits to maintain heat rise within
operating temperature requirements.
CONTACT CURRENT RATING AND RETENTION
Contact
Size*
DC Test
Amperage
Contact Retention
Axial Load
lb. N
20 7.5 15 66.7
16 13.0 25 111.2
12 23.0 30 133.4
SEALING PLUGS
Contact
Size
Sealing Plugs
Military
Part Number
Amphenol/Matrix
Part Number
20 MS27488-20 10-405996-020
16 MS27488-16 10-405996-016
12 MS27488-12 10-405996-012
Note: Each connector is furnished with contacts. One spare for inserts requiring
1 to 26 of each contact, two spares for inserts with more than 26
contacts, and a minimum of one sealing plug up to 15% of the number
of contacts.
CRIMPING TOOLS
Contact
Size
Wire Range Finished Wire Dia. Range Crimping Tool
Part Number
Turret or Positioner
Part NumberAWG mm2Inch mm
20 24-20 0.2-0.6 .040-.083 1.02-2.11 M22520/1-01 or
M22520/2-01
M22520/1-02 or
M22520/2-02
16 20-16 0.5-1.4 .053-.103 1.34-2.62 M22520/1-01 M22520/1-02
12 14-12 2-3 .097-.158 2.46-4.01 M22520/1-01 M22520/1-02
INSERTION/REMOVAL TOOLS
Contact
Size Color Code
Military
Part Number
Amphenol/Matrix
Part Number
20 Red/White M81969/14-11 10-538988-020
16 Blue/White M81969/14-03 10-538988-016
12 Yellow/White M81969/14-04 10-538988-012
14
HOW TO ORDER BY MILITARY PART NUMBER
MIL-C-26482 SERIES 2 CONNECTORS
MS 3470 W12 10 P W
1 2 34567
1. Connector Type
MS designates Military Standard
2. Connector Style
3470 wall mounting receptacle with narrow flange
3472 wall mounting receptacle with wide flange
3471 cable connecting receptacle
3474 jam nut receptacle
3476 straight plug
3475 straight plug with RFI grounding fingers
3. Service Class
L aluminum shell, electroless nickel finish, fluid
resistant insert
A aluminum shell, black anodized finish, non-conduc-
tive fluid resistant insert
W aluminum shell, olive drab cadmium plated, fluid
resistant insert
Note: For stainless steel shell, passivated, order by Amphenol®/Matrix®
proprietary Class G.
Class L inactivates older classes E and R (Ref. MIL-C-26482)
4., 5. Shell size and insert arrangement - See chart on page 9
and pattern drawings that follow.
6. Contact Types
P designates pin
S designates socket
A designates less pins
B designates less sockets
Note: Use A & B only when other than a full complement of power con-
tacts is to be installed.
7. Insert Rotation
“W”, “X”, “Y”, “Z” designate that insert is rotated in its shell
from normal position. No letter required for normal (no
rotation) position. See page 9 for description of alternate
positions.
MIL-C-26482, Series 2
how to order
HOW TO ORDER BY PROPRIETARY PART NUMBER
MIL-C-26482 SERIES 2 CONNECTORS
MB1 0 W 12 10 P W ***
12345678
1. Connector Type
MB1 designates Amphenol®/Matrix® Bayonet Coupling
Connector
2. Connector Style
0 wall mounting receptacle with narrow flange
1 wall mounting receptacle with wide flange
3 cable connecting receptacle
4 jam nut receptacle
6 straight plug
8 straight plug with RFI grounding fingers
3. Service Class
A aluminum shell, black anodize finish, non-conduc-
tive, fluid resistant insert
R aluminum shell, electroless nickel finish, fluid
resistant insert
G stainless steel shell, passivated, fluid resistant
insert
W aluminum shell, cadmium plated, olive drab finish,
fluid resistant insert
4., 5. Shell size and insert arrangement - See chart on page 9
and pattern drawings that follow.
6. Contact Types
P designates pin
S designates socket
7. Insert Rotation
“W”, “X”, “Y”, “Z” designate that insert is rotated in its shell
from normal position. No letter required for normal (no
rotation) position. See page 9 for description of alternate
positions.
8. Modification Number
Consult Amphenol, Sidney, NY for information.
For ordering information on accessories, such as protection
caps and backshell hardware, contact Amphenol, Sidney, NY.
15
Miniature Cylindrical
Proprietary/MIL-C-26482, Series 1 & 2
Connectors
There are several additional connector series within
the Amphenol® MIL-C-26482 and similar types fam-
ily. Each series offers varying design characteristics
and customer options to meet cost considerations
and to provide users with the most design flexibility
possible.
The additional series within the Amphenol Miniature Cylindrical
Family of Connectors are shown in detail in Amphenol catalog
12-070, which can be supplied upon request. Briefly these addi-
tional products are described as follows:
PT, SP, MS/PT
Proprietary/MIL-C-26482, Series 1
These are bayonet type with solder contacts. Both the insert
and main joint gasket are molded from resilient neoprene.
This provides excellent moisture sealing at the gasket and
superior electrical isolation of the contact in the inserts.
Socket contacts are closed entry design. Printed circuit
board contacts are also available in this series.
The SP is a modification of the PT providing special shells
with a wide mounting flange for back panel mounting. The
SP also has a durable non-conductive hard anodic “Alumi-
lite” coating which provides abrasion and corrosion protec-
tion.
There are 8 shell styles in the PT, SP and MS/PT series, and
shell sizes are 6-24. The PT solder is UL recognized. Her-
metics are also available.
PT-SE, SP-SE, MS/PT-SE
Proprietary/MIL-C-26482, Series 1
These are a derivative of the PT line, bayonet type. However,
they incorporate crimp contacts that are rear insertable, front
releasable. An MS approved spring tower retention system
holds the contacts in place.
PT-CE, SP-CE
Proprietary crimp type
Another derivative of the PT line, bayonet type. These also
have crimp contacts that are rear insertable, front releasable,
but the contacts are held in place by a nylon wafer retention
system. The voidless one-piece insert and grommet assem-
bly provide continuous dielectric separation between con-
tacts.
PC, PC-SE, PC-CE
Proprietary solder and crimp type
The PC series within the Amphenol® miniature cylindrical
family is threaded coupling, rather than bayonet coupling.
The threads are double-stubbed so they can not be cross
threaded.
The PC is offered with solder contacts. The PC-SE has
crimp contacts in a spring tower retention system, while the
PC-CE has crimp contacts in a nylon wafer retention system.
Hermetics are available
All miniature cylindricals are intermateable and intermountable
with each other except for the threaded coupling PC Series.
For further information ask for catalog 12-070. Consult Amphe-
nol, Sidney, NY for any assistance on these products or for any
specific application needs.
Additional Miniature Cylindrical Connectors
offered by Amphenol
Mouser Electronics
Related Product Links
654-M81969/14-11 - Amphenol M81969/14-11
Mouser Electronics
Authorized Distributor
Click to View Pricing, Inventory, Delivery & Lifecycle Information:
Anderson Power Products:
M81969/14-11