• 221 West Industry Court • Deer Park, NY 11729-4681 • Phone: (631) 586-7600 • Fax: (631) 242-9798
• http://www.sensitron.com • E-Mail: sales@sensitron.com
SUPER FLUX LED – P4 (piranha type), Wide Angle
DATA SHEET 3561 REV .
Absolute Maximum Rating: (Ta= 25oC)
Symbol Description Max Unit
PDPower dissipation 140 mW
VRReverse voltage 5 V
IFForward current 70 mA
Topr Operating temperature range -30oC to 100oC
Tstg Storage temperature range -35oC to 100oC
Lead soldering temperature ≤ 260oC for 3 seconds
Electro-optical Characteristic: (Ta =25 °
°°
°C)
Chip Wave-
length
IF
(Forward
Current)
Vf (volt)
@
20mA
Iv (mcd)
@
20mA
Φ
ΦΦ
ΦV
(mlm)
at IF
Viewing
Angle
2θ
θθ
θ1/2
Part No.
Material Color nm mA Typ. Typ. Typ. Degree
LTP400-BHC-1 GaInN Green 470 30 3.3 900 1200 40
LTP400-GHC-2 GaInN Green 525 30 3.7 3200 1500 40
LTP400-WHC-1 GaInN White -- 30 3.3 1600 1200 70
LTP400-YTC-1 GaAlInP Yellow 592 70 2.0 1000 2400 70
LTP400-YTC-2 TS GaAlInP Yellow 592 70 2.0 1600 2800 70
LTP400-RTC-1 GaAlInP Red 626 50 2.0 700 2500 70
LTP400-RTC-2 TS GaAlInP Red 626 70 2.4 1500 5000 70
Features
• High current operation and high flux output
• Low thermal resistance and low profile
• Wide viewing angle
Description
The P4 (piranha type) is a clear lensed 7.6mm x 7.6mm square four-leaded package. This low
profile design improves power dissipation and allows higher operating currents. Ideal applications
for this product include emergency lighting, channel letters, interior/exterior automotive and truck
lighting, strip lighting, outdoor signage and general illumination.
LTP400-RTC-x LTP400-YTC-x
LTP400-BHC-1 LTP400-WHC-1
LTP400-GHC-2
DISCLAIMER:
1- The information given herein, including the specifications and dimensions, is subject to change without prior not ice to
improve product characteristics. Before ordering, purchasers are advised to contact the Sensitron Semiconductor sales
department for the latest version of the datasheet(s).
2- In cases where extremely high reliability is required (such as use in nuclear power control, aerospace and aviation,
traffic equipment, medical equipment , and safety equipment) , safety should be ensured by using semiconductor devices
that feature assured safety or by means of users’ fail-safe precautions or other arrangement .
3- In no event shall Sensitron Semiconductor be liable for any damages that may result from an accident or any other
cause during operation of the user’s units according to the datasheet(s). Sensitron Semiconductor assumes no
responsibility for any intellectual property claims or any other problems that may result from applications of information,
products or circuits described in the datasheets.
4- In no event shall Sensitron Semiconductor be liable for any failure in a semiconductor device or any secondary damage
resulting from use at a value exceeding the absolute maximum rating.
5- No license is granted by the datasheet(s) under any patents or other rights of any third party or Sensitron
Semiconductor.
6- The datasheet(s) may not be reproduced or duplicated, in any form, in whole or part, without the expressed written
permission of Sensitron Semiconductor.
7- The products (technologies) described in the datasheet(s) are not to be provided to any party whose purpose in their
application will hinder maintenance of international peace and safety nor are they to be applied to that purpose by their
direct purchasers or any third party. When exporting these products (technologies), the necessary procedures are to be
taken in accordance with related laws and regulations.
• 221 West Industry Court • Deer Park, NY 11729-4681 • Phone: (631) 586-7600 • Fax: (631) 242-9798
• http://www.sensitron.com • E-Mail: sales@sensitron.com
