reserved Schutzvermerk nach DIN 34 beachten Copyright 07.04.2000 @) Bernstein [ [Ti2-SUIZ Hw Ro13.5 Technical data sheet Bernstein AG Postfach 1164 D-32437 Porto Westfalica 608.8171.016| Seeace CEQ >| fie Positive opening fH + th operation according to DIN EN 60947-5-1 IEC 947-5-1 10.5) 6N - 21, ? | [ 13T> 14 I Tt 21 ne 22 > 1 } t 7N je 27 __ | Switching Switching diagram symbo | Tolerance: operating point +0.25mm; actuating force +10% Land when using an at Mechanical features Enclosure: Cover: Actuator: Ambient air temperature: Contact type: Mechanical life: Switch frequency: Mounting: Connection type: Conductor cross-section: Cable entry size: Weight: Electrical features Max. voltage: Max. enduring current: Max. inrush current: Utilization categorie: Standards: Protection class (IP-Code): CSA/UL: Short circuit protection: Approach possibilities By loosening 4 screws it is possible to turn the actuator through 90 so that 4 approach possibilities can be achieved. Remarks The moving parts should be oiled periodically. The planned protection cl Copies are least equivalent cable gland. PBT, glass fibre reinforced PA6.6, black Lever with roller (thermoplast) -30C up to +80C 1 NC-contact, 1 NO-contact (Zb) 3x10 switch operations max. 100/min 2xM4 or 2xMS fixed positioning for safety applications 4 screw connections (M3.5) single core 0.5-1.5mm? / litz wire with connector sleeve 0.5-1.5mm? 1 x Pg9 approx. 0,05kg 250 V AC | th 10A according to IEC 947-5-1 AC 15,A300 240V/3A, 120V/6A / DC 13,Q300 250V/0.27A, 125V/0.55A according to EN 60947-1; EN 60947-5-1 IP65 according to EN 60529; DIN VDE 0470 11 10A 300V AC, A300 Fuse 6A gL ass (|IP-Code) is valid only at closed cover not retreated in case of alternations