© 2001 California Micro Devices Corp. All rights reserved.
5/21/2001 1
TX
CALIFORNIA MICRO DEVICES
215 Topaz Street, Milpitas, California 95035 Tel: (408) 263-3214 Fax: (408) 263-7846 www.calmicro.com
x
%
±x
snoitacificepSlacirtcelE
retemaraP s
noitidnoC
RCT C
C
˚521otC˚55–C˚/mpp052aM
egatloVgnitarepO ˚521otC˚55–cdV001xaM
)rotsiserrep(gnitaRrewoP )C˚051@orezotylraeniletareD(C˚07@ wm052xaM
kcohSlamrehTF
F
202-DTS-LIM701dohteM @
%5.0± ∆Rx
%x
x
∆R
∆R
%
R
aM
erusopxEerutarepmeThgiHtneibmAC˚051@srH00152.0± ∆
aM
ecnatsiseRerutsioM202-DTS-LIM601dohteM5.0±aM
efiL )rh0001/C˚521(F202-DTS-LIM801dohteM5.0±aM
esioN K052otpuF202-DTS-LIM803dohteM Ω
≥K052 Ω
Bd52–
Bd02–
xaM
ecnatsiseRnoitalusnI C
˚52@01X1
21
ΩniM
Back-Contact Thin Film Resistor Series
California Micro Devices TX Series back contact 20 mil
resistor chips offer the superior properties of Tantalum
Nitride material in a single-bond design. Conductive
epoxy or eutectic die-attachment to an active substrate
C1350800
area eliminates the need for a second wire bond. TX
Series chips are available in resistance values up to one
meg ohm and in tolerances to one percent.
Bonding Area
Laser Code Area
Formats
Die Size: 20±3 mils square
Bonding Pads: 4x4 mils typical
10ΩΩ
ΩΩ
Ω to 470ΩΩ
ΩΩ
Ω
470ΩΩ
ΩΩ
Ω to 1MEG ΩΩ
ΩΩ
Ω
seulaV
01morF ΩgeM1ot Ω.rotsiserhcaerof
gnigakcaP
.dradnatssimumixamspihc004fosyarterauqshcniowT
setoN
.rehtonaoteulavenomorfyravyamnrettaprotsiseR.1
Notes: 1. This document supercedes all previous specifications.
2. Specifications are subject to change without notice or obligation.
* Best tolerance for < 25 Ω is + 5%
snoitacificepSlacinahceM
etartsbuSkcihtslim2±01nociliS
reyaLnoitalosI0iS 2nim,kcihtÅ000,01
gnikcaB)lanoitpodlog(deppaL
daPronoitazilateMnim,kcihtÅ000,01munimulA
)lanoitpodlogÅ000,51(
noitangiseDrebmuNtraP
XT2086F RCTdaPdnoB
seireSeulaV*ecnareloT=A/mpp05± °CmunimulA=retteLoN
erastigid3tsriF
.eulavtnacifingis
stneserpertigidtsaL
.sorezforebmun
lamicedsetacidniR
.tniop
%1±=F=H/mpp001± °CdloG=G
%2±=G=retteLoN/mpp052± °C
%5±=J
%01±=K
%02±=M