R.46 X2 CLASS (EN132400) - MKP Series METALLIZED POLYPROPYLENE FILM CAPACITOR SELF-HEALING PROPERTIES Typical applications: interference suppression and across-the-line applications. Suitable for use in situations where failure of the capacitor would not lead to danger of electric shock. PRODUCT CODE: R46 Loose Fig.1 d 0 0.05 05 Insulated flexible leads 0.5mm2 Insulated rigid leads Taped Fig.2 p 15* 22.5p27.5 p = 37.5 0.6 0.8 1 *Except for box 10x16x18 having d = 0.80.05mm All dimensions are in mm. GENERAL TECHNICAL DATA TEST METHOD AND PERFORMANCE Dielectric: polypropylene film. Damp heat, steady state: Plates: metal layer deposited by evaporation under vacuum. Winding: non-inductive type. Leads: tinned wire. Protection: plastic case, epoxy resin filled. Box material is solvent resistant and flame retardant according to UL94 V0. Marking : Manufacturer's logo, series, capacitance, tolerance, rated voltage, capacitor class, dielectric code, climatic category, passive flammability category, manufacturing date code, approvals, manufacturing plant. Climatic category: 40/110/56 IEC 60068-1 Operating temperature range: -40 to +110_C Related documents: IEC 60384-14 2nd edition '93; EN 132400. ELECTRICAL CHARACTERISTICS Rated voltage (VR): 275Vac; 50/60Hz Capacitance range: 0.01mF to 4.7mF Capacitance values: E6 series (IEC 60063 Norm). Capacitance tolerances (measured at 1 kHz): 10% (K); 20% (M). Dissipation factor (DF): tgx10-4 at +25_C 5_C: 10 (6)* at 1kHz * Typical value Insulation resistance: Temperature: Relative humidity (RH): Test duration: +40_C2_C 93% 2% 56 days Test conditions 2nd Temperature: Relative humidity (RH): Test duration: +60_C2_C 95% 2% 500 hours Performance Dielectric strength: no dielectric breakdown or flashover at 4.3xVR (d.c.)/1 min Capacitance change |C/C|: 5% Insulation resistance: 50% of initial limit. Endurance: Test conditions Temperature: Test duration: Voltage applied: +110_C2_C 1000 h 1.25xVR +1000Vac 0.1 s/h Performance Dielectric strength: no dielectric breakdown or flashover at 4.3xVR (d.c.)/1 min Capacitance change |C/C|: 10% Insulation resistance: 50% of initial limit. Resistance to soldering heat: Test conditions Solder bath temperature: +260_C5_C Dipping time (with heat screen):10 s1 s Performance Test conditions Temperature: Voltage charge time: Voltage charge: Test conditions 1st +25_C5_C 1 min 100 Vdc Capacitance change |C/C|: 2% Winding scheme Performance 1x105 M (5x105 M )* for C0.33mF 30000 s (150000 s )* for C>0.33mF * Typical value single sided metallized polypropylene film Test voltage between terminations (on all pieces): 1500Vac for 1 s + 2200Vdc for 1 s at +25_C5_C ARCOTRONICS ITALIA SpA Tel. +39051 939111 November 23, 2001 Fax +39051 939479 E--MAIL: trading@arcotronics.com R.46 X2 CLASS (EN132400) - MKP Series METALLIZED POLYPROPYLENE FILM CAPACITOR SELF-HEALING PROPERTIES APPROVALS (All dimensions are in mm) 0.010 mF 0.015 mF B 5.0 5.0 H 11.0 11.0 L 13.0 13.0 p 10.0 10.0 0.6 0.6 Max dv/dt at 390Vdc (V/ ms) 500 500 0.022 mF 0.033 mF 0.047 mF 0.068 mF 0.010 mF 0.015 mF 0.022 mF 0.033 mF 0.047 mF 0.068 mF 0.10 mF 0.10 mF 0.15 mF 0.15 mF 0.22 mF 0.22 mF 0.33 mF 0.47 mF 0.15 mF 0.22 mF 0.33 mF 0.47 mF 0.47 mF 0.68 mF 0.68 mF 1.0 mF 0.47 mF 0.68 mF 0.68 mF 1.0 mF 1.5 mF 1.5 mF 2.2 mF 2.2 mF 3.3 mF 3.3 mF 4.7 mF 2.2 mF 3.3 mF 4.7 mF 5.0 5.0 6.0 6.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 6.0 6.0 7.5 7.5 8.5 10.0 11.0 6.0 6.0 7.0 8.5 10.0 10.0 11.0 13.0 9.0 9.0 10.0 11.0 13.0 15.0 14.0 18.0 18.0 22.0 22.0 13.0 16.0 19.0 11.0 11.0 12.0 12.0 11.0 11.0 11.0 11.0 11.0 11.0 11.0 12.0 12.0 13.5 13.5 14.5 16.0 19.0 15.0 15.0 16.0 17.0 18.5 18.5 20.0 22.0 17.0 17.0 20.0 20.0 22.0 24.5 28.0 33.0 33.0 37.0 37.0 24.0 28.5 32.0 13.0 13.0 13.0 13.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0 26.5 26.5 26.5 26.5 26.5 26.5 26.5 26.5 32.0 32.0 32.0 32.0 32.0 32.0 32.0 32.0 32.0 32.0 32.0 41.5 41.5 41.5 10.0 10.0 10.0 10.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 22.5 22.5 22.5 22.5 22.5 22.5 22.5 22.5 27.5 27.5 27.5 27.5 27.5 27.5 27.5 27.5 27.5 27.5 27.5 37.5 37.5 37.5 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 1.0 1.0 1.0 500 500 500 500 400 400 400 400 400 400 400 400 400 400 400 400 400 400 200 200 200 200 200 200 200 200 150 150 150 150 150 150 150 150 150 150 150 100 100 100 d 275 Vac Rated Cap. ((*)) Part Number R46.KF. 2100.- -.M1. R46.KF. 2150.- -.M1. R46.KF. 2220.- -.M1. R46.KF. 2330.- -.M1. R46.KF. 2470.- -.M1. R46.KF. 2680.- -.M1. R46.KI. 2100.- -.01. R46.KI. 2150.- -.01. R46.KI. 2220.- -.01. R46.KI. 2330.- -.01. R46.KI. 2470.- -.01. R46.KI. 2680.- -.01. R46.KI. 3100.- -.M1.M R46.KI. 3100.- -.01. R46.KI. 3150.- -.M2.M R46.KI. 3150.- -.M1. R46.KI. 3220.- -.M2.M R46.KI. 3220.- -.M1. R46.KI. 3330.- -.M1. R46.KI. 3470.- -.M1. R46.KN. 3150.- -.01. R46.KN. 3220.- -.M1. R46.KN. 3330.- -.M1. R46.KN. 3470.- -.M1. R46.KN. 3470.- -.01. R46.KN. 3680.- -.M2. R46.KN. 3680.- -.M1. R46.KN. 4100.- -.M1. R46.KR. 3470.- -.01. R46.KR. 3680.- -.M1. R46.KR. 3680.- -.01. R46.KR. 4100.- -.M1. R46.KR. 4150.- -.M1. R46.KR. 4150.- -.01. R46.KR. 4220.- -.M1. R46.KR. 4220.- -.01. R46.KR. 4330.- -.M2. R46.KR. 4330.- -.M1. R46.KR. 4470.- -.M1. R46.KW.4220.- -.M1. R46.KW.4330.- -.M1. R46.KW.4470.- -.M1. - Mechanical version and packaging (Table 1) Tolerance: K (10%); M (20%) (*) ENEC-IMQ EN132400 CB Class X2 CSA C22.2 N_1 (up to 1mF) Across-the-line File No. LR 83890 UL 1414 (up to 1mF) Across-the-line File No.E97797 UL 1283 (310 Vac) Electromagnetic Interference Filters File No.E85238 File No. V4413 File No. IT-1524 CCEE IEC60384-14 Class X2 File No.CH0045034-2000 CSA and UL 1414 for 250Vac only. Approved according to EN 132400 (IEC 60384-14 2nd edition 1993 plus Amendment A1: 1995). According to IEC 60065. (*) ENEC mark has replaced all the following European National marks: TYPICAL GRAPHS (*) E12 series available up to 5.6mF upon request Z = f (f) (lead length 2 mm). Typical values. Table 1 Standard packaging style Lead length Taping style Ordering code Z [ ] 1000 P2 (mm) Fig. (No.) Pitch (mm) (Digit 10 to 11) AMMO--PACK AMMO--PACK 12.70 19.05 1 2 10.0/15.0 22.5 DQ DQ REEL 355mm 12.70 1 10.0/15.0 CK REEL 500mm 19.05 2 22.5/27.5 CK (mm) Loose, short leads Loose, long leads 100 10 1 04 +2 25 --1/+2 00 50 0 .1 Loose, insulated rigid leads 30 +5 51 0 .0 1 Loose, insulated flexible leads 1505 52 0 .0 0 1 0 .0 1 F 1 F p . 2 7 .5 4 .7 F p .3 7 .5 0 .1 Note: Ammo-pack is the preferred packaging for taped version. 1 0 .3 3 F p .2 2 .5 0.0 1 F p .1 0 0 .1 F p. 15 10 100 F [M H z ] November 23, 2001 ARCOTRONICS ITALIA SpA Tel. +39051 939111 Fax +39051 939479 E--MAIL: trading@arcotronics.com