Product Data Sheet 1000 WATT AC/DC POWER SUPPLY TX1000 DESCRIPTION FEATURES The TX1000 Series of single-output, 1kW power supplies are fully featured for usage worldwide. With active Power Factor Correction (PFC) to EN61000-32, wide-range input of 90-264VAC, EMI compliance to FCC and CISPR 22, "CE" Mark, and immunity to EN61000-4, the TX1000 series is ready for global deployment. Standard features include remote sense compensation, output voltage adjustment, active current sharing, remote inhibit, power fail warning, DC OK signal, and thermal shutdown. A complete array of output voltages from 2.5 to 48VDC is available. The self-cooled 5" x 4.88" x 12" chassis provides industrystandard modularity that permits optimum flexibility in installation. An optional ORing diode is offered on all models greater than 5VDC models. Harmonic Correction to EN61000-3-2 Wide Range Input of 90-264VAC FCC / CISPR 22 Class A EMI Filtering Typical Power Factor of 0.99 Active Current Sharing Self-Cooled 5"x 4.88"x 12" Chassis 70-80% Efficiency Optional ORing Diode UL, CSA, and VDE compliant CE Marked EN61000-4 Immunity AGENCY APPROVALS Internet: http://www.cdpowerelectronics.com Power Electronics Division, United States 3400 E Britannia Drive, Tucson, Arizona 85706 Phone: 800.547.2537 Fax: 520.770.9369 TX1000 2/2000 REV C Power Electronics Division, Europe C&D Technologies (Power Electronics) Ltd. 132 Shannon Industrial Estate, Shannon, Co. Clare, Ireland Tel: +353.61.474.133 Fax:+353.61.474.141 Page 1 Input Specifications Parameters Conditions Operating Range 47-63Hz Min Typ 90 Max Units 264 VAC Input Current Nominal line, full load 12 A Inrush Current 120VAC, 25 0C, cold start 80 Apk 0 240VAC, 25 C, cold start Efficiency Holdup Power Factor (1) 160 Nominal line, full load 70 Full load 20 75 80 Apk % msec Full load 0.99 Notes: (1) Harmonic currents meet EN61000-3-2 Output Voltages and Maximum Rated Loads Model Output Voltage TX10005AASLPLNH Output Current 5.0 200A (1) 12.0 84A TX10005CASLPLNH(1) 15.0 67A (1) 18.0 56A TX10005EASLPLNH(1) 24.0 42A (1) TX10005BASLPLNH TX10005DASLPLNH TX10005FASLPLNH 28.0 36A TX10005GASLPLNH(1) 36.0 28A (1) 48.0 21A 20.0 50A (1) 3.3 182A TXD10005LASLPLNH(1) 2.5 200A TX10005HASLPLNH TX10005JASLPLNH(1) TXD10005KASLPLNH Notes: (1) Model specified without optional ORing diode; to specify the diode option, replace the letter "N" with the letter "D", no O-Ring diode on 5V models. Output Specifications Parameter Conditions Output Power All environmental and line conditions Voltage Adjustment Range Relative to nominal output voltage Output Regulation Line and load (each) Minimum Load Min Typ Max 1000 +5 Measured at output terminals, 20MHz Temperature Coefficient 00 to 500C Watts % +0.2 0 PARD Units % Amps 1 % pk-pk %/0C +0.2 Environmental Specifications Parameter Conditions Ambient Temperature Output de-rated linearly to 50% of (Operating) rated capacity between 500C and 700C Ambient Temperature Altitude (Operating) Altitude (Non-operating) Non-operating Min 0 Typ Max Units +70 0 C +85 0 -200 +10,000 Feet -200 +50,000 Feet -50 C Shock Per MIL-STD-810D, Method 516.3, Procedure II, in each axis, including NTSA drop test Vibration Per MIL-STD-810D, Method 514.3, Procedure II, in each axis, including NTSA drop test Cooling The TX1000 is provided with an internal cooling fan. Page 2 TX1000 2/2000 REV C Product Features Features Characteristic Remote Sense 500mV compensation Active Current Sharing Single Wire; 5% tolerance if outputs are over 25% of rated load ORing Diode Optional on all models (not available on 5V model) OVP 125% of nominal (+7.5%) Thermal Shutdown Automatic Restart DC OK Signal Logic "1" when output is within +3% of nominal Power Fail Warning Signal Transition to Logic "0" at least 5msec before loss of output regulation Remote Inhibit Logic "0" applied will inhibit output (referenced to -Sense terminal) Product Compliances Approval Characteristic UL and cUL UL1950, 3rd Edition VDE EN60950 FCC Class A requirements for conducted emissions (1) CISPR 22 Class A requirements for conducted emissions EN61000-4-2 Electrostatic Discharge, Level 4 EN61000-4-4 Electrical Fast Transients, Level 3 EN61000-4-5 Input Surge Immunity, Level 3 EN61000-3-2 Harmonic Currents, Class A CE Mark Low Voltage Directive rd Notes: (1) UL1950, 3 Edition incorporates the requirements of CSA 1950. Ordering Information Model Designation TX1000 BASE MODEL Chassis: "5" = 5" x 4.88" x 12"; "M" = modified Output Voltage: See Chart below Input Filter: "A" designates Class A EMI filter Fan: "S" designates Standard Fan Remote Inhibit: "L" designates that Logic "0" applied inhibits output "P" designates Active Input Power Factor Correction with widerange input voltage of 90-264 VAC Power Fail Warning: "L" designates transition to Logic "0" upon loss of AC Output ORing diode: "N" = None; "D" = Diode Option DC OK: "H" designates that Logic "1" indicates a DC OK condition OUTPUT VOLTAGES A = 5V G = 36V B = 12V H = 48V C = 15V J = 20V D = 18V K = 3.3V E = 24V L = 2.5V F = 28V The information provided herein is believed to be reliable; however, C&D TECHNOLOGIES assumes no responsibility for inaccuracies or omissions. C&D TECHNOLOGIES assumes no responsibility for the use of this information, and all use of such information shall be entirely at the user's own risk. Prices and specifications are subject to change without notice. No patent rights or licenses to any of the circuits described herein are implied or granted to any third party. C&D TECHNOLOGIES does not authorize or warrant any C&D TECHNOLOGIES product for use in life support devices/systems or in aircraft control applications. TX1000 2/2000 REV C Page 3 12.00 .19 MAX TX1000 2/2000 REV C 2 10 J1 J1 Pin No. 9 1 2 3 1 4 5 Function Remote Inhibit DC OK N/C N/C Power Fail Pin Function No. 10 N/C 9 - Sense 8 N/C 7 + Sense 6 Current Share MECHANICAL .60 5.00 1/4 - 20 UNC-2A HEX HEAD SCREW 2 PLACES .315 TYP AIR FLOW 4.88 +.000 -.170 1.00 1.85 1.60 1.95 3.45 V ADJ 3.000 TB1 6-32 UNF-2A PHILSLOT TORQUE TO 9 INCH/LBS MAX. 3 PLACES J1 CONNECTOR J1 AMP NO. 87579-2 OR EQUIVALENT 1.22 8-32UNC-2B .25 MAX. SCREW PENETRATION 4 PLACES 6.375 FUNCTION REMOTE INHIBIT DC OK N/C N/C POWER FAIL CURRENT SHARE + SENSE N/C _ SENSE N/C Page 4 1.00 PIN 1 PIN NO. 1 2 3 4 5 6 7 8 9 10