TX1000 2/2000 REV C Page 1
FEATURES
Harmonic Correction to EN61000-3-2
Wide Range Input of 90-264VAC
FCC / CISPR 22 Class A EMI Filtering
T ypical P ower Factor of 0.99
Active Current Sharing
Self-Cooled 5”x 4.88”x 12” Chassis
70-80% Efficiency
Optional ORing Diode
UL, CSA, and VDE compliant
CE Marked
EN61000-4 Immunity AGENCY APPROVALS
Internet: http://www.cdpowerelectronics.com
Power Electronics Division, United States
3400 E Britannia Drive, Tucson, Arizona 85706
Phone: 800.547.2537 Fax: 520.770.9369
Power Electronics Division, Europe
C&D Technologies (Power Electronics) Ltd.
132 Shannon Industrial Estate, Shannon, Co. Clare, Ireland
Tel: +353.61.474.133 Fax:+353.61.474.141
TX1000
1000 WATT
AC/DC POWER SUPPLY
Product Data Sheet
DESCRIPTION
The TX1000 Series of single-output, 1kW power
supplies are fully f eatured for usage worldwide. With
active Power Factor Correction (PFC) to EN61000-3-
2, wide-range input of 90-264VAC, EMI compliance to
FCC and CISPR 22, “CE” Mark, and immunity to
EN61000-4, the TX1000 series is ready for global
deployment. Standard features include remote sense
compensation, output voltage adjustment, active
current sharing, remote inhibit, power fail warning, DC
OK signal, and thermal shutdown. A complete array
of output voltages from 2.5 to 48VDC is available. The
self-cooled 5” x 4.88” x 12” chassis provides industry-
standard modularity that permits optimum flexibility in
installation. An optional ORing diode is offered on all
models greater than 5VDC models.
TX1000 2/2000 REV C
Page 2
Input Specifications
Parameters Conditions Min Typ Max Units
Operating Range 47-63Hz 90 264 VAC
Input Current Nominal line, full load 12 A
Inrush Current 120VAC, 250C, cold star t 80 Apk
240VAC, 250C, cold start 16 0 Apk
Efficiency Nominal line, full load 70 75 80 %
Holdup Full load 20 msec
Power Factor (1) Full load 0.99
Notes: (1) Harmonic currents meet EN61000-3-2
Output Voltages and Maximum Rated Loads
Model Output Voltage Output Current
TX10005AASLPLNH 5. 0 200A
TX10005BASLPLNH(1) 12.0 84A
TX10005CASLPLNH(1) 15.0 67A
TX10005DASLPLNH(1) 18.0 56A
TX10005EASLPLNH(1) 24.0 42A
TX10005FASLPLNH(1) 28.0 36A
TX10005GASLPLNH(1) 36.0 28A
TX10005HASLPLNH(1) 48.0 21A
TX10005JASLPLNH(1) 20.0 50A
TXD10005KASLPLNH(1) 3.3 182A
TXD10005LASLPLNH(1) 2.5 200A
Notes: (1) Model specified without optional ORing diode; to specify the diode option, replace the letter “N” with the letter “D”, no O-Ring diode on 5V models.
Output Specifications
Parameter Conditions Min Typ Max Units
Output Power All environmental and line conditions 1000 Watts
Voltage Adjustment Range Relative to nominal output voltage +5 %
Output Regulation Line and load (each) +0.2 %
Minimum Load 0 Amps
PARD Measured at output ter minals, 20MHz 1 % pk-pk
Temperature Coefficient 00 to 500C+0.2 %/0C
Environmental Specifications
Parameter Conditions Min Typ Max Units
Ambient Temperature Output de-rated linearly to 50% of
(Operating) rated capacity between 500C and 700C 0 +70 0C
Ambient Temperature Non-operating -50 +85 0C
Altitude (Operating) -200 +10,000 Feet
Altitude (Non-operating) -200 +50,000 Feet
Shock Per MIL-STD-810D, Method 516.3, Procedure II, in each axis, including NTSA drop test
Vibration Per MIL-STD-810D, Method 514.3, Procedure II, in each axis, including NTSA drop test
Cooling The TX1000 is provided with an internal cooling fan.
TX1000 2/2000 REV C Page 3
The information provided herein is believed to be reliable; however, C&D TECHNOLOGIES assumes no responsibility for inaccuracies or omissions. C&D TECHNOLOGIES assumes
no responsibility for the use of this information, and all use of such information shall be entirely at the user’s own risk. Prices and specifications are subject to change without notice.
No patent rights or licenses to any of the circuits described herein are implied or granted to any third party. C&D TECHNOLOGIES does not authorize or warrant any C&D TECHNOLOGIES
product for use in life support devices/systems or in aircraft control applications.
Product Features
Features Characteristic
Remote Sense 500mV compensation
Active Current Shar ing Single Wire; 5% tolerance if outputs are over 25% of rated load
ORing Diode Optional on all models (not available on 5V model)
OVP 125% of nominal (+7.5%)
Thermal Shutdown Automatic Restart
DC OK Signal Logic “1” when output is within +3% of nominal
Power Fail Warning Signal Transition to Logic “0” at least 5msec before loss of output regulation
Remote Inhibit Logic “0” applied will inhibit output (referenced to –Sense terminal)
Product Compliances
Approval Characteristic
UL and cUL UL1950, 3rd Edition (1)
VDE EN60950
FCC Class A requirements for conducted emissions
CISPR 22 Class A requirements for conducted emissions
EN61000-4-2 Electrostatic Discharge, Level 4
EN61000-4-4 Electr ical Fast Transients, Level 3
EN61000-4-5 Input Surge Immunity, Level 3
EN61000-3-2 Har monic Currents, Class A
CE Mark Low Voltage Directive
Notes: (1) UL1950, 3rd Edition incorporates the requirements of CSA 1950.
TX1000
Ordering Information
Model Designation
BASE MODEL
Chassis: “5” = 5” x 4.88” x 12”; “M” = modified
Output Voltage: See Char t below
Input Filter: “A” designates Class A EMI filter
Fan: “S” designates Standard Fan
Remote Inhibit: “L” designates that Logic “0” applied inhibits output
“P” designates Active Input Power Factor Correction with widerange input voltage of 90-264 VAC
Power Fail Warning: “L” designates transition to Logic “0” upon loss of AC
Output ORing diode: “N” = None; “D” = Diode Option
DC OK: “H” designates that Logic “1” indicates a DC OK condition
OUTPUT VOLTAGES
A = 5V G = 36V
B = 12V H = 48V
C = 15V J = 20V
D = 18V K = 3.3V
E = 24V L = 2.5V
F = 28V
TX1000 2/2000 REV C
Page 4
AIR FLOW
J1
J1
Pin Function Pin Function
No. No.
1 Remote Inhibit 10 N/C
2 DC OK 9 - Sense
3 N/C 8 N/C
4 N/C 7 + Sense
5 Power Fail 6 Current Share
.60
12.00
.19 MAX
4.88 +.000
-.170
10 9
21
3.000
1.00
8-32UNC-2B
.25 MAX. SCREW PENETRATION
4 PLACES
1.22
V ADJ
J1
PIN 1
5.00
.315
TYP
1.85
1.95 3.45 TB1
6-32 UNF-2A PHILSLO T
TORQUE TO 9 INCH/LBS MAX.
3 PLACES
1.00
1.60
1/4 - 20 UNC-2A
HEX HEAD SCREW
2 PLACES
6.375
MECHANICAL
J1 CONNECTOR
AMP NO . 87579-2 OR EQ UIVALENT
PIN FUNCTION
NO.
1 REMOTE INHIBIT
2 DC OK
3 N/C
4 N/C
5 POWER FAIL
6 CURRENT SHARE
7 + SENSE
8 N/C
9_ SENSE
10 N/C
