SF2036E * Low Insertion Loss L-Band SAW Filter * 3.0 X 3.0 mm Surface-Mount Case * Complies with Directive 2002/95/EC (RoHS) 1880 MHz SAW Filter Pb Absolute Maximum Ratings Rating Value Units +10 dBm Maximum Incident Power in Passband DC Voltage on any Non-ground Terminal 5 V Operable Temperature Range -45 to +125 C Specification Temperature Range -30 to +85 C Storage Temperature Range in Tape and Reel -40 to +85 C Maximum Soldering Profile, 5 Cycles Maximum 265 C for 10 s SM3030-6 Electrical Characteristics Characteristic Sym Center Frequency Insertion Loss, 1850 to 1910 MHz Amplitude Ripple, 1850 to 1910 MHz Attenuation Referenced to 0 dB: DC to 1660 MHz 1660 to 1721 MHz 1721 to 1800 MHz 1930 to 1990 MHz 2000 to 2040 MHz 2040 to 2480 MHz 3700 to 3820 MHz Input/Output Return Loss, 1850 to 1910 MHz Source Impedance Load Impedance Case Style Lid Symbolization, Y=year, WW=week, S=shif Notes Min fC IL 20 30 20 7 25 31 25 7.4 ZS ZL Typ Max Units 1880 2.45 1.2 4.0 2.5 MHz dB dBP-P 32 35 37 19 37 38 35 13 50 50 SM3030-6 3 x 3 mm Nominal Footprint 510 YWWS dB dB dB dB dB dB dB dB Electrical Connections Connection Input Terminals 2 Output 5 Ground All others CAUTION: Electrostatic Sensitive Device. Observe precautions for handling. NOTES: 1. 2. 3. 4. 5. 6. Unless noted otherwise, all specifications apply over the operating temperature range with filter soldered to the specified demonstration board with impedance matching to 50 and measured with 50 network analyzer. Unless noted otherwise, all frequency specifications are referenced to the nominal center frequency, fc. Rejection is measured as attenuation below the minimum IL point in the passband. Rejection in final user application is dependent on PCB layout and external impedance matching design. See Application Note No. 42 for details. The design, manufacturing process, and specifications of this filter are subject to change. US and international patents may apply. Murata, stylized Murata logo, and Murata N.A., Inc. are registered trademarks of Murata Manufacturing Co., Ltd. Copyright (c) Murata Manufacturing Co., Ltd. All rights reserved. March 2014 SF2036E (R) 6/6/17 Page 1 of 5 www.murata.com Copyright (c) Murata Manufacturing Co., Ltd. All rights reserved. March 2014 SF2036E (R) 6/6/17 Page 2 of 5 www.murata.com Copyright (c) Murata Manufacturing Co., Ltd. All rights reserved. March 2014 SF2036E (R) 6/6/17 Page 3 of 5 www.murata.com SM3030-6 Case 6-Terminal Ceramic Surface-Mount Case 3.0 X 3.0 mm Nominal Footprint Case and PCB Footprint Dimensions Dimension A B C D E F G H I J K L M N O K L N K N mm Nom 3.00 3.00 1.25 0.90 2.80 1.60 0.85 1.50 0.60 1.30 3.20 1.70 1.05 0.81 0.38 Min 2.87 2.87 1.12 0.77 2.67 1.47 0.72 1.37 0.47 1.17 Max 3.13 3.13 1.38 1.03 2.93 1.73 0.98 1.63 0.73 1.43 Inches Nom 0.118 0.118 0.049 0.035 0.110 0.063 0.033 0.059 0.024 0.051 0.126 0.067 0.041 0.032 0.015 Min 0.113 0.113 0.044 0.030 0.105 0.058 0.028 0.054 0.019 0.046 Max 0.123 0.123 0.054 0.040 0.115 0.068 0.038 0.064 0.029 0.056 Case Materials O Materials N M M PCB Footprint Top View Solder Pad Plating 0.3 to 1.0 m Gold over 1.27 to 8.89 m Nickel Lid Plating 2.0 to 3.0 m Nickel Body Al2O3 Ceramic Pb Free Top View Bottom View B G C 1 6 A 2 5 3 4 E D Copyright (c) Murata Manufacturing Co., Ltd. All rights reserved. March 2014 SF2036E (R) 6/6/17 Page 4 of 5 F H 6 1 5 2 4 3 I J www.murata.com 100 REF. "B" REF. Tape and Reel Specifications "B" Nominal Size Inches millimeters 7 178 13 330 Quantity Per Reel 500 3000 See Detail "A" 13. 0 12.0 20 .2 2.0 COMPONENT ORIENTATION and DIMENSIONS Carrier Tape Dimensions Ao 3.35 mm Bo 3.35 mm Ko 1.4 mm Pitch 8.0 mm W 12.0 mm PIN #1 USER DIRECTION OF FEED Copyright (c) Murata Manufacturing Co., Ltd. All rights reserved. March 2014 SF2036E (R) 6/6/17 Page 5 of 5 www.murata.com