Copyright © Murata Manufacturing Co., Ltd. All rights reserved. March 2014
SF2036E (R) 6/6/17 Page 1 of 5 www.murata.com
1. Unless noted otherwise, all specifications apply over the operating temperature range with filter soldered to the specified demonstration board with impedance
matching to 50 and measured with 50 network analyzer.
2. Unless noted otherwise, all frequency specifications are referenced to the nominal center frequency, fc.
3. Rejection is measured as attenuation below the minimum IL point in the passband. Rejection in final user application is dependent on PCB layout and external
impedance matching design. See Application Note No. 42 for details.
4. The design, manufacturing process, and specifications of this filter are subject to change.
5. US and international patents may apply.
6. Murata, stylized Murata logo, and Murata N.A., Inc. are registered trademarks of Murata Manufacturing Co., Ltd.
Electrical Characteristics
Electrical Connections
Characteristic Sym Notes Min Typ Max Units
Center Frequency fC1880 MHz
Insertion Loss, 1850 to 1910 MHz IL 2.45 4.0 dB
Amplitude Ripple, 1850 to 1910 MHz 1.2 2.5 dBP-P
Attenuation Referenced to 0 dB:
DC to 1660 MHz 20 32 dB
1660 to 1721 MHz 30 35 dB
1721 to 1800 MHz 20 37 dB
1930 to 1990 MHz 719 dB
2000 to 2040 MHz 25 37 dB
2040 to 2480 MHz 31 38 dB
3700 to 3820 MHz 25 35 dB
Input/Output Return Loss, 1850 to 1910 MHz 7.4 13 dB
Source Impedance ZS50
Load Impedance ZL50
Case Style SM3030-6 3 x 3 mm Nominal Footprint
Lid Symbolization, Y=year, WW=week, S=shif 510 YWWS
Connection Terminals
Input 2
Output 5
Ground All others
• Low Insertion Loss L-Band SAW Filter
• 3.0 X 3.0 mm Surface-Mount Case
• Complies with Directive 2002/95/EC (RoHS)
Absolute Maximum Ratings
Rating Value Units
Maximum Incident Power in Passband +10 dBm
DC Voltage on any Non-ground Terminal 5 V
Operable Temperature Range -45 to +125 °C
Specification Temperature Range -30 to +85 °C
Storage Temperature Range in Tape and Reel -40 to +85 °C
Maximum Soldering Profile, 5 Cycles Maximum 265 °C for 10 s
1880 MHz
SAW Filter
SF2036E
SM3030-6
CAUTION: Electrostatic Sensitive Device. Observe precautions for handling.
NOTES:
Pb
Copyright © Murata Manufacturing Co., Ltd. All rights reserved. March 2014
SF2036E (R) 6/6/17 Page 2 of 5 www.murata.com
Copyright © Murata Manufacturing Co., Ltd. All rights reserved. March 2014
SF2036E (R) 6/6/17 Page 3 of 5 www.murata.com
Copyright © Murata Manufacturing Co., Ltd. All rights reserved. March 2014
SF2036E (R) 6/6/17 Page 4 of 5 www.murata.com
K
K
O
MM
N
N
N
L
6-Terminal Ceramic Surface-Mount Case
3.0 X 3.0 mm Nominal Footprint
SM3030-6 Case
Top View Bottom View
Case and PCB Footprint Dimensions
Case Materials
Dimension mm Inches
Min Nom Max Min Nom Max
A2.87 3.00 3.13 0.113 0.118 0.123
B2.87 3.00 3.13 0.113 0.118 0.123
C1.12 1.25 1.38 0.044 0.049 0.054
D0.77 0.90 1.03 0.030 0.035 0.040
E2.67 2.80 2.93 0.105 0.110 0.115
F1.47 1.60 1.73 0.058 0.063 0.068
G0.72 0.85 0.98 0.028 0.033 0.038
H1.37 1.50 1.63 0.054 0.059 0.064
I0.47 0.60 0.73 0.019 0.024 0.029
J1.17 1.30 1.43 0.046 0.051 0.056
K3.20 0.126
L1.70 0.067
M1.05 0.041
N0.81 0.032
O0.38 0.015
Materials
Solder Pad
Plating 0.3 to 1.0 µm Gold over 1.27 to 8.89 µm Nickel
Lid Plating 2.0 to 3.0 µm Nickel
Body Al2O3 Ceramic
Pb Free
PCB Footprint Top View
1
2
3
6
5
4
1
2
3
6
5
4
A
BC
DJ
EF
GH
I
Copyright © Murata Manufacturing Co., Ltd. All rights reserved. March 2014
SF2036E (R) 6/6/17 Page 5 of 5 www.murata.com
Tape and Reel Specifications
“B”
Nominal Size Quantity Per Reel
Inches millimeters
7 178 500
13 330 3000
USER DIRECTION OF FEED
COMPONENT ORIENTATION and DIMENSIONS
Carrier Tape Dimensions
Ao 3.35 mm
Bo 3.35 mm
Ko 1.4 mm
Pitch 8.0 mm
W 12.0 mm
PIN #1
See Detail "A"
13.0
20.2
2.0
12.0
100 REF.
"B" REF.
