332T-Series - ABB Semiconductors

SS-2-6 T-109

Specifications 330T Series Pneumatic Gauge and

Differential Pressure Transmitters

n n 2 Year Warranty

n n ±0.35% accuracy

n n Low air consumption

n n Field-proven instrument

n n Common secondary construction

n n Unitized relay with push-to-clean orifice

n n Light-weight

n n Non-interacting span and zero

This is a force-balanced instrument transmitting 3 to

15 psig (20 to 100 kPa) signals proportional to

gauge or differential pressure.

These transmitters offer precise measurement,

reliable performance, and easy installation and

maintenance.

PERFORMANCE SPECIFICATIONS

Output

20 to 100 kPa (3 to 15 psi)

Air Supply

140 - 155 kPa (20 - 22 psig) recommended

125 kPa (18 psig) minimum

175 kPa (25 psig) maximum

Warning: Use of a supply gas other than air can create a

hazardous environment because o small amount of gas

continuously vents to atmosphere.

Air Consumption

0.34m3/hr (0.2 scfm)

Zero Elevation and Suppression

Elevation and suppression spring furnished on all models

Gauge (F): Max. Elevation Max. Suppression

Catalog No. kPa psig kPa psig

332T -101.3 -14.7 970 140

333T -101.3 -14.7 4800 700

Differential (D): Max. Elevation Max. Suppression

Catalog No. kPa psig kPa psig

332T -700 -100 970 140

333T -3500 -500 4800 700

Upper Range Limit

Catalog No. kPa psig

332T 1000 150

333T 5200 750

(20 kPa) Zero (3 psig Output)

Max. Elevation Max. Suppression

Catalog No. kPa psig kPa psig

334T -100 -14.7 19 600 2800

335T -100 -14.7 36 000 5400

336T -100 -14.7 126 000 18,000

Upper Range Limit 15 psig (100 kPa) Output

Catalog No. kPa psig

334T 14 000 2000

335T 40 000 6000

336T 140 000 20,000

Vacuum Service Full Vacuum

Maximum Overrange Pressure

332T 1400 kPa (200 psig)

333T 7000 kPa (1000 psig)

334T 28 000 kPa (4000 psig)

335T 40 000 kPa (6000 psig)

336T 140 000 kPa (20,000 psig)

Maximum Static Pressure

332TD 14 000 kPa (2000 psig)

333TD 14 000 kPa (2000 psig)

Operating Temperature

Secondary -40° to 82°C (-40° to 180°F)

Primary -40° to 177°C (-40° to 350°F)

Storage Temperature

-68° to 82°C (-90° to 180°F)

Accuracy

Calibration capability better than ±0.35% of Zero-based span.

Includes conformity, hysteresis, and repeatability.

Transmitters factory-calibrated better than 0.35% of span.

(Note: 335T above 3000 psi and 336T above 15,000 psi

spans are ± 1% accuracy.)

Repeatability

0.1% to 0.2% of span depending on model selected.

Mounting Position

Universal; however, rezeroing may be required with some

orientations.

ABB Instrumentation

SS-2-6 T-110

PHYSICAL SPECIFICATIONS

Air Supply and Output Connections

1/4 internal NPT

Weight

332T and 333T - 2.7kg (6 lb)

334T, 335T, and 336T - 1.8 kg (4 lb)

Process Connections

332. 333T 1/2 in. internal NPT

334T. 335T. 336T 1/4 in. internal NPT

Gasket

Teflon1 Silicate - ceramic filled

Housing

Corrosion-resistant, die-cast aluminum with baked enamel

finish; fiberglass cover optional.

Mounting Bracket

Carbon steel universal mount for pipe mounting 30mm to

50mm (1 1/4 to 2 in.) or surface mounting.

NACE (National Association of Corrosion Engineers)

Interpretation of NACE Specification MR 01-75, latest revision, is

that it applies only to process-wetted parts. Therefore, only the

diaphragm, flanges and fittings, and adapters conform to this

specification when the NACE form of transmitter is ordered. Bolts

are not included since they are not process-wetted in normal

usage.

All accessories may be ordered with NACE form of transmitter

except SIS-172.

1Trademark of E. I. du Pont de Nemours & Co., Inc.

DIMENSIONS (332TD, 333TD)

DIMENSIONS (334T, 335TF, 336TF)

Catalog No.

334TF, 335T

5-9/16

5/8

336TF

6-15/32

11/16

SS-2-6 T-111

ORDERING INFORMATION

330T SERIES PNEUMATIC GAUGE AND DIFFERENTIAL PRESSURE TRANSMITTER

1.Select one character or set of characters from each category and specify complete catalog number as per sample below.

2.Specify tagging if required. Tagging information can be provided on the exterior stainless steel plate

3.Specify calibration in psi or kPa.

Code No. Description

BASE NUMBER - 1st thru 4th characters

332T Span adjustable from 70 to 700 kPa (10 to 100 psi)

333T Span adjustable from 350 to 3500 kPa (50 to 500 psi)

334T Span adjustable from 1400 to 14 000 kPa (200 to 2000 psi)

335T Span adjustable from 4000 to 40 000 kPa (600 to 6000 psi)

336T 00882 only Span adjustable from 14 000 to 140 000 kPa (2000 to 20 000 psi)

ACTUATION - 5th character

DDifferential pressure (two inputs). For 332TD and 333TD only.

FGauge pressure (one input)

PROCESS WETTED MATERIAL - 6th thru 8th characters

000 NACE form: Hastelloy C1/316L SST for 332T (D, F) and 333T (D, F) only.

Hastelloy C diaphragm, 17-4 pH SST body, Type 321 SST trim for 334TF and 335TF only.

See NACE note for forms available

002 316 SST - for 332T (D, F), 333T (D, F), 334TF, and 335TF only

003 Hastelloy C - for 332TF or 333TF only

008 Type 17-4 pH SST - for 336T only

PROCESS CONNECTION MATERIAL - 9th character

2316 SST; 332T (D, F), 333T (D, F), 334TF, 335TF only

3Hastelloy C - for 332TF and 333TF only

8Type 17-4 pH SST - for 334TF, 335TF, 336TF only

PROCESS CONNECTION - 10th character

11/2 in. internal NPT - for 332T (D, F) and 333T (D, F) only

21/4 in. internal NPT - for 334TF, 335TF, and 336TF only

333TF00221 SAMPLE CATALOG NUMBER

ACCESSORIES

Add after catalog number. Example: 333TF00221(103)

(103)- (111) Air Sets refer to Price Sheet 7-1B.

(283)-(287) Air Sets

NOTE: NACE forms available are:

332TF00021 or 031

332TD00021

333TF00021 or 031

333TD00021

334TF00082

335TF00082

(146) Mounting Bracket - Universal type, carbon steel. Includes U-bolts for 30 to 50 mm (1-1/4 to 2 in.) pipe or

surface mounting

(277) Fiberglass reinforced cover and epoxy-coated subbase

(278) Fiberglass reinforced cover only

SIS-172 Oxygen Service: cleaning, calibration, and packaging to ABB Instrumentation Standards

(Not available on 334T, 335T, 336T or any NACE forms)

SIS-174 Safety blowout disc on secondary

SIS-177 Case purge

45P1098H Metal Identification Plate (316 sst tagging)

1Trademark of Haynes International, Inc.

SS-2-6 T-112

The Company’s policy is one of continuous product

improvement and the right is reserved to modify

specifications contained herein without notice.

SS-2-6 96.11

ABB Kent-Taylor Ltd. ABB Instrumentation Inc. ABB Kent-Taylor SpA

St. Neots Cambs. P.O. Box 20550 22016 Lenno

England, PE19 3EU Rochester, New York 14602-0550 Como, Italy

Tel: (01480) 475321 Tel: (716) 292-6050 Tel: (0344) 58111

Fax: (01480) 217948 Fax: (716) 273-6207 Fax: (0344) 56278