Theproductsinthiscatalogarenotrecommendedfornewdesign R F C o m p o n e n t s January 2016 Multilayer Low Pass Filter (2in1) For 824-915MHz / 1710-1910MHz DEA161910LT-9031A1 1.6x0.8mm [EIA 0603]* * Dimensions Code JIS[EIA] Theproductsinthiscatalogarenotrecommendedfornewdesign RF Components Multilayer Low Pass Filter (2in1) Conformity to RoHS Directive For 824-915MHz / 1710-1910MHz DEA161910LT-9031A1 SHAPES AND DIMENSIONS [Top view] 1.600.10 0.600.10 (5) (4) (1) (2) (3) Marking 0.800.10 (6) [Bottom view] 0.250.10 0.150.10 0.550.10 0.100.10 Terminal functions 1 High Band Input port 2 GND 3 Low Band Input port 4 Low Band Output port 5 GND 6 High Band Output port Dimensions in mm 0.300.10 RECOMMENDED LAND PATTERN EVALUATION BOARD High Band Input port High Band Output port Low Band Output port Dimensions in mm 0.90 THRU HOLE Metal Pattern (Cu) Filter LAND PATTERN 0.63 0.05 0.25 Low Band Input port 0.35 0.30 0.60 0.30 Dimensions in mm Line width to be designed to match 50: characteristic impedance, depending on PCB material and thickness. RoHS Directive Compliant Product: See the following for more details related to RoHS Directive compliant products. http://product.tdk.com/en/environment/rohs/ * All specifications are subject to change without notice. * Before using these products, be sure to request the delivery specifications. 20160107 / rf_lpf_dea161910lt-9031a1_en.fm Theproductsinthiscatalogarenotrecommendedfornewdesign RF Components DEA161910LT-9031A1 ELECTRICAL CHARACTERISTICS LOW-BAND Item Insertion Loss (dB) Return Loss (dB) Attenuation (dB) Frequency Range (MHz) Min. Typ. Max. 824 to 915 824 to 915 824 to 915 1648 to 1830 2472 to 2745 3296 to 3660 4120 to 4575 4944 to 6405 6500 to 12750 -- -- 10.03 30 25 20 13 7 3 0.47 -- 29.2 40.8 34.8 28.3 19.5 15.0 6.7 50 (Nominal) 0.60 0.80 (-40 to +85C) -- -- -- -- -- -- -- Frequency Range (MHz) Min. Typ. Max. 1710 to 1910 1710 to 1910 1710 to 1910 3420 to 3820 5130 to 5730 6840 to 9550 10260 to 12750 -- -- 10.03 30 20 7 3 0.43 -- 17.0 40.3 26.1 12.0 8.3 50 (Nominal) 0.60 0.80 (-40 to +85C) -- -- -- -- -- Characteristic Impedance (:) Ta: +255C HIGH-BAND Item Insertion Loss (dB) Return Loss (dB) Attenuation (dB) Characteristic Impedance (:) Ta: +255C TEMPERATURE RANGE Operating temperature C -40 to +85 Storage temperature C -40 to +85 * All specifications are subject to change without notice. * Before using these products, be sure to request the delivery specifications. 20160107 / rf_lpf_dea161910lt-9031a1_en.fm Theproductsinthiscatalogarenotrecommendedfornewdesign RF Components DEA161910LT-9031A1 FREQUENCY CHARACTERISTICS HIGH-BAND Insertion Loss 0.0 0.0 0.5 0.5 1.0 1.0 Insertion Loss(dB) Insertion Loss(dB) LOW-BAND Insertion Loss 1.5 2.0 2.5 600 700 800 900 1000 Frequency(MHz) 1100 1200 1300 3.0 1400 1400 Return Loss 0 10 10 20 30 40 50 500 1800 2000 2200 2400 Frequency(MHz) 2600 2800 3000 1800 2000 2200 2400 Frequency(MHz) 2600 2800 3000 20 30 40 600 700 800 900 1000 Frequency(MHz) 1100 1200 1300 50 1400 1400 Attenuation 1600 Attenuation 0 10 10 20 20 Attenuation(dB) 0 30 40 30 40 50 50 60 1600 Return Loss 0 Return Loss(dB) Return Loss(dB) 2.0 2.5 3.0 500 Attenuation(dB) 1.5 0 2000 4000 6000 8000 Frequency(MHz) 10000 12000 14000 60 0 2000 4000 6000 8000 Frequency(MHz) 10000 12000 14000 * All specifications are subject to change without notice. * Before using these products, be sure to request the delivery specifications. 20160107 / rf_lpf_dea161910lt-9031a1_en.fm Theproductsinthiscatalogarenotrecommendedfornewdesign RF Components RECOMMENDED REFLOW PROFILE Preheating Soldering Peak T4 T: Temperature 3C/sec or lower 6C/sec or lower T3 T2 T3 t3 T1 t1 t2 t: Time Preheating Temp. T1 150C T2 200C Time t1 60 to 120sec Soldering Critical zone (T3 to T4) Temp. Time T3 t2 217C 60 to 120sec t3 : Time within 5C of actual peak temperature The maximum number of reflow is 3. * All specifications are subject to change without notice. * Before using these products, be sure to request the delivery specifications. Peak Temp. T4 240 to 260C Time t3 30sec max. Theproductsinthiscatalogarenotrecommendedfornewdesign RF Components REMINDERS FOR USING THESE PRODUCTS Before using these products, be sure to request the delivery specifications. SAFETY REMINDERS Please pay sufficient attention to the warnings for safe designing when using these products. REMINDERS The products listed on this catalog are intended for use in general electronic equipment (AV equipment, telecommunications equipment, home appliances, amusement equipment, computer equipment, personal equipment, office equipment, measurement equipment, industrial robots) under a normal operation and use condition. The products are not designed or warranted to meet the requirements of the applications listed below, whose performance and/or quality require a more stringent level of safety or reliability, or whose failure, malfunction or trouble could cause serious damage to society, person or property. Please understand that we are not responsible for any damage or liability caused by use of the products in any of the applications below or for any other use exceeding the range or conditions set forth in this catalog. (1) Aerospace/Aviation equipment (2) Transportation equipment (cars, electric trains, ships, etc.) (3) Medical equipment (4) Power-generation control equipment (5) Atomic energy-related equipment (6) Seabed equipment (7) Transportation control equipment (8) Public information-processing equipment (9) Military equipment (10) Electric heating apparatus, burning equipment (11) Disaster prevention/crime prevention equipment (12) Safety equipment (13) Other applications that are not considered general-purpose applications When using this product in general-purpose applications, you are kindly requested to take into consideration securing protection circuit/ equipment or providing backup circuits, etc., to ensure higher safety. * All specifications are subject to change without notice. * Before using these products, be sure to request the delivery specifications. 20160107 / rf_lpf_dea161910lt-9031a1_en.fm