TIP41, TIP41A, TIP41B, TIP41C NPN SILICON POWER TRANSISTORS Copyright (c) 1997, Power Innovations Limited, UK DECEMBER 1970 - REVISED MARCH 1997 Designed for Complementary Use with the TIP42 Series TO-220 PACKAGE (TOP VIEW) 65 W at 25C Case Temperature 6 A Continuous Collector Current B 1 10 A Peak Collector Current C 2 Customer-Specified Selections Available E 3 Pin 2 is in electrical contact with the mounting base. MDTRACA absolute maximum ratings at 25C case temperature (unless otherwise noted) RATING SYMBOL TIP41 Collector-base voltage (IE = 0) Collector-emitter voltage (IB = 0) TIP41A TIP41B VALUE VCBO 100 120 TIP41C 140 TIP41 40 TIP41A TIP41B UNIT 80 VCEO TIP41C 60 80 V V 100 V EBO 5 V IC 6 A ICM 10 A IB 3 A Continuous device dissipation at (or below) 25C case temperature (see Note 2) Ptot 65 W Continuous device dissipation at (or below) 25C free air temperature (see Note 3) Ptot 2 W 1/2LIC 2 62.5 mJ Tj -65 to +150 C Tstg -65 to +150 C TL 250 C Emitter-base voltage Continuous collector current Peak collector current (see Note 1) Continuous base current Unclamped inductive load energy (see Note 4) Operating junction temperature range Storage temperature range Lead temperature 3.2 mm from case for 10 seconds NOTES: 1. 2. 3. 4. This value applies for tp 0.3 ms, duty cycle 10%. Derate linearly to 150C case temperature at the rate of 0.52 W/C. Derate linearly to 150C free air temperature at the rate of 16 mW/C. This rating is based on the capability of the transistor to operate safely in a circuit of: L = 20 mH, IB(on) = 0.4 A, R BE = 100 , VBE(off) = 0, RS = 0.1 , VCC = 20 V. PRODUCT INFORMATION Information is current as of publication date. Products conform to specifications in accordance with the terms of Power Innovations standard warranty. Production processing does not necessarily include testing of all parameters. 1 TIP41, TIP41A, TIP41B, TIP41C NPN SILICON POWER TRANSISTORS DECEMBER 1970 - REVISED MARCH 1997 electrical characteristics at 25C case temperature PARAMETER V (BR)CEO ICES ICEO IEBO hFE VCE(sat) VBE hfe |hfe| TEST CONDITIONS Collector-emitter breakdown voltage IC = 30 mA MIN IB = 0 (see Note 5) TIP41 40 TIP41A 60 TIP41B 80 TIP41C 100 TYP MAX V VCE = 80 V VBE = 0 TIP41 0.4 Collector-emitter V CE = 100 V V BE = 0 TIP41A 0.4 cut-off current V CE = 120 V V BE = 0 TIP41B 0.4 V CE = 140 V V BE = 0 TIP41C 0.4 Collector cut-off VCE = 30 V IB = 0 TIP41/41A 0.7 current V CE = 60 V IB = 0 TIP41B/41C 0.7 VEB = IC = 0 Emitter cut-off current 5V UNIT 1 mA mA mA Forward current VCE = 4V IC = 0.3 A transfer ratio V CE = 4V IC = 3A 0.6 A IC = 6A (see Notes 5 and 6) 1.5 V 4V IC = 6A (see Notes 5 and 6) 2 V Collector-emitter saturation voltage Base-emitter IB = VCE = voltage Small signal forward current transfer ratio Small signal forward current transfer ratio (see Notes 5 and 6) 30 15 VCE = 10 V IC = 0.5 A f = 1 kHz 20 VCE = 10 V IC = 0.5 A f = 1 MHz 3 75 NOTES: 5. These parameters must be measured using pulse techniques, tp = 300 s, duty cycle 2%. 6. These parameters must be measured using voltage-sensing contacts, separate from the current carrying contacts. thermal characteristics MAX UNIT RJC Junction to case thermal resistance PARAMETER MIN TYP 1.92 C/W RJA Junction to free air thermal resistance 62.5 C/W MAX UNIT resistive-load-switching characteristics at 25C case temperature PARAMETER MIN ton Turn-on time IC = 6 A IB(on) = 0.6 A IB(off) = -0.6 A toff Turn-off time V BE(off) = -4 V RL = 5 tp = 20 s, dc 2% Voltage and current values shown are nominal; exact values vary slightly with transistor parameters. PRODUCT 2 TEST CONDITIONS INFORMATION TYP 0.6 s 1 s TIP41, TIP41A, TIP41B, TIP41C NPN SILICON POWER TRANSISTORS DECEMBER 1970 - REVISED MARCH 1997 TYPICAL CHARACTERISTICS TYPICAL DC CURRENT GAIN vs COLLECTOR CURRENT COLLECTOR-EMITTER SATURATION VOLTAGE vs BASE CURRENT TCS633AD hFE - DC Current Gain VCE = 4 V TC = 25C tp = 300 s, duty cycle < 2% 100 10 1*0 0*01 0*1 1*0 IC = 300 mA IC = 1 A IC = 3 A IC = 6 A 1*0 0*1 0*01 0*001 10 TCS633AE 10 VCE(sat) - Collector-Emitter Saturation Voltage - V 1000 IC - Collector Current - A 0*01 0*1 1*0 10 IB - Base Current - A Figure 1. Figure 2. BASE-EMITTER VOLTAGE vs COLLECTOR CURRENT 1*2 TCS633AF VBE - Base-Emitter Voltage - V VCE = 4 V TC = 25C 1*1 1*0 0*9 0*8 0*7 0*6 0*1 1*0 10 IC - Collector Current - A Figure 3. PRODUCT INFORMATION 3 TIP41, TIP41A, TIP41B, TIP41C NPN SILICON POWER TRANSISTORS DECEMBER 1970 - REVISED MARCH 1997 MAXIMUM SAFE OPERATING REGIONS MAXIMUM FORWARD-BIAS SAFE OPERATING AREA IC - Collector Current - A 100 SAS633AB tp = 300 s, d = 0.1 = 10% tp = 1 ms, d = 0.1 = 10% tp = 10 ms, d = 0.1 = 10% DC Operation 10 1*0 0*1 TIP41 TIP41A TIP41B TIP41C 0*01 1*0 10 100 1000 VCE - Collector-Emitter Voltage - V Figure 4. THERMAL INFORMATION MAXIMUM POWER DISSIPATION vs CASE TEMPERATURE TIS633AB Ptot - Maximum Power Dissipation - W 80 70 60 50 40 30 20 10 0 0 25 50 75 100 TC - Case Temperature - C Figure 5. PRODUCT 4 INFORMATION 125 150 TIP41, TIP41A, TIP41B, TIP41C NPN SILICON POWER TRANSISTORS DECEMBER 1970 - REVISED MARCH 1997 MECHANICAL DATA TO-220 3-pin plastic flange-mount package This single-in-line package consists of a circuit mounted on a lead frame and encapsulated within a plastic compound. The compound will withstand soldering temperature with no deformation, and circuit performance characteristics will remain stable when operated in high humidity conditions. Leads require no additional cleaning or processing when used in soldered assembly. TO220 4,70 4,20 o 10,4 10,0 3,96 3,71 1,32 1,23 2,95 2,54 see Note B 6,6 6,0 15,90 14,55 see Note C 6,1 3,5 1,70 1,07 0,97 0,61 1 2 14,1 12,7 3 2,74 2,34 5,28 4,88 VERSION 1 0,64 0,41 2,90 2,40 VERSION 2 ALL LINEAR DIMENSIONS IN MILLIMETERS NOTES: A. The centre pin is in electrical contact with the mounting tab. B. Mounting tab corner profile according to package version. C. Typical fixing hole centre stand off height according to package version. Version 1, 18.0 mm. Version 2, 17.6 mm. PRODUCT INFORMATION 5 TIP41, TIP41A, TIP41B, TIP41C NPN SILICON POWER TRANSISTORS DECEMBER 1970 - REVISED MARCH 1997 IMPORTANT NOTICE Power Innovations Limited (PI) reserves the right to make changes to its products or to discontinue any semiconductor product or service without notice, and advises its customers to verify, before placing orders, that the information being relied on is current. PI warrants performance of its semiconductor products to the specifications applicable at the time of sale in accordance with PI's standard warranty. Testing and other quality control techniques are utilized to the extent PI deems necessary to support this warranty. Specific testing of all parameters of each device is not necessarily performed, except as mandated by government requirements. PI accepts no liability for applications assistance, customer product design, software performance, or infringement of patents or services described herein. Nor is any license, either express or implied, granted under any patent right, copyright, design right, or other intellectual property right of PI covering or relating to any combination, machine, or process in which such semiconductor products or services might be or are used. PI SEMICONDUCTOR PRODUCTS ARE NOT DESIGNED, INTENDED, AUTHORIZED, OR WARRANTED TO BE SUITABLE FOR USE IN LIFE-SUPPORT APPLICATIONS, DEVICES OR SYSTEMS. Copyright (c) 1997, Power Innovations Limited PRODUCT 6 INFORMATION