MINIATURE RELAY 1 POLE--1 to 2 A (FOR SIGNAL SWITCHING) FBR211 SERIES RoHS compliant n FEATURES l l l l l l l l DI 2 A maximum carrying current Capable of 2 A maximum continuous carrying current in the contact Superior reliability gold-overlay contacts P type: Gold-overlay silver-palladium contacts International terminal pitch of one inch grid terminal layout High sensitivity, low power dissipation types also available Standard types: 0.45 W (A or B type) High sensitivity types: 0.2 W (C or E type) Conforms to FCC 68.302 (high dielectric strength type) UL recognized (File number E63615) CSA recognized (File number LR64026) RoHS compliant since date code: 0433A Please see page 5 for more information SC ON n ORDERING INFORMATION [Example] FBR211 S A (a) (b) (c) D012 (d) TI U - P (e) (f ) NU 2 (g) (-CSA) (h) ED (a) Series Name (b) Enclosure FBR211 (c) Coil Power and Schematics A: Standard A type (nominal power 450 mW type) B: Standard B type C: High sensitivity C type (nominal power 200 mW type) E: High sensitivity E type S: Flux free type N: Plastic sealed type } } (1 (d) Nominal Voltage (Example) D003: 3 VDC D012: 12 VDC (refer to the COIL DATA CHART) (e) UL Marking on Cover Nil : No UL marking U : UL marking (f ) Contact Material P : Gold-overlay silver-palladium M : Gold-overlay silver (g) Special Type Nil : Standard 2 : High dielectric strength type (h) CSA Marking Nil : Standard -CSA : UL + CSA marking (valid when (e) is U) 99 8) Note: The designation name is stamped on the top of the relay case as follows: (Example) Designation ordered: FBR211SAD005-P Stamp: 211SAD005-P 1 FBR211 SERIES n COIL DATA CHART 1. STANDARD (A or B type) MODEL Nominal Nominal Coil current Must Must Maximum Nominal Coil A type B type resistance (at nominal operate release allowable temperature power voltage (10%) voltage) voltage voltage voltage rise Flux free Plastic sealed Flux free Plastic sealed approx. FBR211SAD001-n FBR211NAD001-n FBR211SBD001-n FBR211NBD001-n 1.5 VDC 5 300 mA FBR211SAD003-n FBR211NAD003-n FBR211SBD003-n FBR211NBD003-n 3 VDC 20 150 mA DI FBR211SAD005-n FBR211NAD005-n FBR211SBD005-n FBR211NBD005-n 5 VDC 56 89 mA 70% max. 10% min. 150% of Approx. Approx. FBR211SAD006-n FBR211NAD006-n FBR211SBD006-n FBR211NBD006-n 6 VDC 80 75 mA of nominal of nominal nominal 450 mW 45 deg voltage voltage voltage (at nominal (at nominal FBR211SAD009-n FBR211NAD009-n FBR211SBD009-n FBR211NBD009-n 9 VDC 180 50 mA voltage) voltage) SC ON FBR211SAD012-n FBR211NAD012-n FBR211SBD012-n FBR211NBD012-n 12 VDC 320 38 mA FBR211SAD024-n FBR211NAD024-n FBR211SBD024-n FBR211NBD024-n 24 VDC 1,280 19 mA Note: All values in the table are measured at 20C. 2. HIGH SENSITIVITY (C or E type) MODEL Nominal Nominal Coil current Must Must Maximum Nominal Coil C type E type resistance (at nominal operate release allowable temperature voltage power (10%) voltage) voltage voltage voltage rise Flux free Plastic sealed Flux free Plastic sealed approx. FBR211SCD001-n FBR211NCD001-n FBR211SED001-n FBR211NED001-n FBR211SCD003-n FBR211NCD003-n FBR211SED003-n FBR211NED003-n TI 1.5 VDC 3 VDC 12 125 mA NU 45 67 mA FBR211SCD005-n FBR211NCD005-n FBR211SED005-n FBR211NED005-n 5 VDC 120 42 mA 70% max. 10% min. 225% of Approx. Approx. FBR211SCD006-n FBR211NCD006-n FBR211SED006-n FBR211NED006-n 6 VDC 180 33 mA of nominal of nominal nominal 200 mW 25 deg voltage voltage voltage (at nominal (at nominal FBR211SCD009-n FBR211NCD009-n FBR211SED009-n FBR211NED009-n 9 VDC 400 23 mA voltage) voltage) FBR211SCD012-n FBR211NCD012-n FBR211SED012-n FBR211NED012-n FBR211SCD024-n FBR211NCD024-n FBR211SED024-n FBR211NED024-n Note: All values in the table are measured at 20C. 12 VDC 24 VDC 700 17 mA 2,800 9 mA ED (1 99 8) 2 FBR211 SERIES n SPECIFICATIONS Item Contact Standard (A or B type) High sensitive (C or E type) Arrangement 1 form C (SPDT) Material Gold-overlay silver-palladium / gold-overlay silver Resistance (initial) Maximum 100 m (at 0.1 A 6 VDC) DI Coil Rating (resistive) 0.5 A 120 VAC or 1 A 28 VDC Maximum Carrying Current 2A Maximum Switching Power 60 VA or 28 W SC ON Max. Switching Voltage*1 Maximum Switching Current Minimum Switching (reference) load*2 220 VAC or 150 VDC 1.25 A (AC) or 2 A (DC) Plastic sealed 1 mA, 1V Flux free 1 mA, 5V Nominal Power (at 20C) Approximately 450 mW Operate Power (at 20C) Approximately 315 mW maximum Approximately 140 mW maximum Operating Temperature -25C to +55C (no frost) -25C to +75C (no frost) Operating Humidity Time Value Life Operate (at nominal voltage) Release (at nominal voltage) Mechanical Electrical (Refer to the REFERENCE DATA) Other Vibration Resistance Shock Resistance Weight TI Approximately 200 mW 45 to 85%RH Maximum 5 ms Maximum 5 ms NU 5 x 106 operations minimum 3 x 105 operations minimum (at 1 A/ 28 VDC resistive load) 1 x 105 operations minimum (at 2 A/ 12 VDC resistive load) 1 x 105 operations minimum (at 0.5 A/120 VDC resistive load) ED 10 to 55 Hz (double amplitude of 1.5 mm) Misoperation 100 m/s2 (111 ms) Endurance 1,000 m/s2 (111 ms) Approximately 4 g 60 m/s2 (111 ms) *1 If the switching voltage exceeds the rated contact voltage, reduce the current. The current values vary according to the type of load. *2 Values when switching a resistive load at normal room temperature and humidity and in a clean environment. The minimum switching load varies with the switching frequency and operation environment. n INSULATION (1 99 Item Standard (A or B) Isolation (initial) Minimum 100 M (at 500VDC) Dielectric Strength 500VAC 1 min. (standard) 1,500VAC 1 min. (high isolation coil and contact) n SAFETY STANDARDS 8) High sensitive (C or E) Type Compliance Contact rating UL UL 110 E63615 CSA C22.2 No. 14 LR 40304, LR 46016 Flammability: UL 94-V0 (plastics) 0.5A, 120VAC (resistive) 1A, 28VDC (resistive) 3 FBR211 SERIES CHARACTERISTIC DATA 110 100 90 Operating voltage range 140 130 120 Must ltage te vo opera 110 100 90 Operating temperature (C) Coil temperature rise (C) 70 (at 20C) Contact load current (A) 60 50 40 30 20 0.2 0.4 0.6 0.3 0.1 ( AC contact rating) ( 20 30 DC contact rating) NU 50 FBR211 n = 100 Operate Release 30 60 40 10 20 30 40 50 60 70 80 10 5 Nominal voltage multiplying factor (%) 1 2 3 4 5 Time (ms) 6 7 28 V DC resistive load 120 V AC resistive load 0 0.5 1.0 1.5 2.0 Contact load current (A) Distribution of contact resistance 80 FBR211 n = 100 40 (1 99 0 0 0.8 12 V DC resistive load 20 0 0 0.6 60 20 0 0.4 Coil power (W) 50 20 10 e Life curve ED Distribution (%) 80 40 tim 100 1 120 Distribution of operate and release time 100 Distribution (%) Distribution (%) 50 0.2 (x104) 200 DC resistive load Contact load current (A) Operate Release te 2 0 AC resistive load 10 0.8 Distribution of operate and release voltage era Operating temperature (C) TI 0.5 n REFERENCE DATA FBR211 n = 100 te v opera 1.0 Coil power (W) 60 Must Maximum switching capacity Standard (0.45 W type) High sensitive (0.2 W type) Op 3 1 e oltag -10 0 10 20 30 40 50 60 70 80 Coil temperature rise data Not including bounce time 4 Release time 80 70 -10 0 10 20 30 40 50 60 70 80 (Data) assumes that the maximum allowable temperature of E type insulation coil is 115C Operating voltage range SC ON 80 70 Operate and release time data 5 Time (msec) DI e ag olt il v co le ab ow all 140 130 120 160 150 Nominal voltage multiplying factor (%) (Data) assumes that the maximum allowable temperature of E type insulation coil is 115C Range of operation temperature and voltage (high sensitive 0.2 W type) ge volta coil able llow ma imu Max 160 150 um xim Ma Nominal voltage multiplying factor (%) Range of operation temperature and voltage (Standard 0.45 W type) Service life (operations) n 8 0 10 20 30 40 50 60 70 Contact resistance (m) 8) 80 4 FBR211 SERIES n DIMENSIONS 1. STANDARD (Flux free type) Dimensions 10.1+0.5 0.3 3.2 10.5+0.5 DI Schematics (BOTTOM VIEW) (A type or C type) 15.1+0.5 SC ON 7.62 (1.24) 0.6 0.35 (1.2) 10.16 (2.04) (1.9) 10.16 TI 3. PC BOARD MOUNTING HOLE LAYOUT 3.2 10.7+0.5 7.62 2.54 7.62 10.16 2.54 1 5 6 12 8 7 12 8 7 (B type or E type) 1 5 6 1 5 6 12 8 7 12 8 7 NU PC board mounting hole layout (BOTTOM VIEW) 6-o1.0 6 (A type or C type) 16.5+0.5 0.6 5 Schematics (BOTTOM VIEW) Dimensions 0.3 1 2.54 2. N-TYPE (Plastic sealed type) 11.7 +0.5 (B type or E type) ED (1 Unit: mm 99 8) 5 FBR211 SERIES RoHS Compliance and Lead Free Relay Information 1. General Information Relays produced after the specific date code that is indicated on each data sheet are lead-free now. Most of our signal and power relays are lead-free. Please refer to Lead-Free Status Info. (http://www.fujitsu.com/us/downloads/MICRO/fcai/relays/lead-free-letter.pdf) l Lead free solder paste currently used in relays is Sn-3.0Ag-0.5Cu. l All signal and most power relays also comply with RoHS. Please refer to individual data sheets. Relays that are RoHS compliant do not contain the 5 hazardous materials that are restricted by RoHS directive (lead, mercury, chromium IV, PBB, PBDE). l It has been verified that using lead-free relays in leaded assembly process will not cause any problems (compatible). l "LF" is marked on each outer and inner carton. (No marking on individual relays). l To avoid leaded relays (for lead-free sample, etc.) please consult with area sales office. l We will ship leaded relays as long as the leaded relay inventory exists. Note: Cadmium was exempted from RoHS on October 21, 2005. (Amendment to Directive 2002/95/EC) l DI SC ON TI 2. Recommended Lead Free Solder Profile l Recommended solder paste Sn-3.0Ag-0.5Cu. Reflow Solder condition Flow Solder condition: Pre-heating: Soldering: maximum 120C dip within 5 sec. at 260C soler bath Solder by Soldering Iron: Soldering Iron Temperature: maximum 360C Duration: maximum 3 sec. NU ED (1 99 We highly recommend that you confirm your actual solder conditions 3. Moisture Sensitivity l Moisture Sensitivity Level standard is not applicable to electromechanical realys. 4. Tin Whisker l 8) Dipped SnAgCu solder is known as low risk tin whisker. No considerable length whisker was found by our in house test. 6 FBR211 SERIES Fujitsu Components International Headquarter Offices Japan Fujitsu Component Limited Gotanda-Chuo Building 3-5, Higashigotanda 2-chome, Shinagawa-ku Tokyo 141, Japan Tel: (81-3) 5449-7010 Fax: (81-3) 5449-2626 Email: promothq@ft.ed.fujitsu.com Web: www.fcl.fujitsu.com Europe Fujitsu Components Europe B.V. Diamantlaan 25 2132 WV Hoofddorp Netherlands Tel: (31-23) 5560910 Fax: (31-23) 5560950 Email: info@fceu.fujitsu.com Web: emea.fujitsu.com/components/ North and South America Fujitsu Components America, Inc. 250 E. Caribbean Drive Sunnyvale, CA 94089 U.S.A. Tel: (1-408) 745-4900 Fax: (1-408) 745-4970 Email: components@us.fujitsu.com Web: http://www.fujitsu.com/us/services/edevices/components/ Asia Pacific Fujitsu Components Asia Ltd. 102E Pasir Panjang Road #01-01 Citilink Warehouse Complex Singapore 118529 Tel: (65) 6375-8560 Fax: (65) 6273-3021 Email: fcal@fcal.fujitsu.com Web: http://www.fujitsu.com/sg/services/micro/components/ DI SC ON (c)2008 Fujitsu Components America, Inc. All rights reserved. All trademarks or registered trademarks are the property of their respective owners. TI Fujitsu Components America or its affiliates do not warrant that the content of datasheet is error free. In a continuing effort to improve our products Fujitsu Components America, Inc. or its affiliates reserve the right to change specifications/datasheets without prior notice. Rev. January 18, 2008. NU ED (1 99 8) 7