Conductive Polymer Aluminum Solid Capacitors Surface Mount Type Series : SVPG Features Low profile (Height 4.5 mm max.) ESR (8 m to 30 m) RoHS compliance, Halogen free Low Specifications Size code Category temperature range Rated voltage range Rated capacitance range Capacitance tolerance Leakage current Dissipation factor (tan d) Endurance Damp heat (Steady State) B45 C8 -55 C to +105 C C10 16 V.DC to 25 V.DC 15 F to 47 F 16 V.DC 270 F 20 % (120 Hz / + 20 C) Please see the attached characteristics list Please see the attached characteristics list +105 C, 5000 h, rated voltage applied Capacitance change Within 20 % of the initial value tan d < 150 % of the initial limit DC leakage current Within the initial limit +60 C, 90 % to 95 %, 1000 h, No-applied voltage Capacitance change Within 20 % of the initial value tan d < 150 % of the initial limit DC leakage current Within the initial limit (after voltage processing) Marking Dimensions (not to scale) 0.2 max. W H fD Polarity marking (-) Lot. No. Series + L R. Capacitance Size code fD0.5 R. Voltage B45 C8 C10 5.0 6.3 6.3 C P - L +0.1 -0.4 4.4 7.9 9.9 R W0.2 H0.2 C0.2 5.3 6.6 6.6 5.3 6.6 6.6 6.0 7.3 7.3 Unit : mm R P0.2 0.6 to 0.8 0.6 to 0.8 0.6 to 0.8 1.4 2.1 2.1 Externals of figure are the reference. Characteristics list Rated Rated Series voltage capacitance (V.DC) (F) Case size (mm) 47 16 SVPG 20 25 270 33 15 NEW fD L 5.0 6.3 6.3 5.0 5.0 4.4 7.9 9.9 4.4 4.4 Size code B45 C8 C10 B45 Specifications Ripple 1 ESR 2 current tan d 3 (m max.) (mAr.m.s.) 3200 25 0.12 5080 10 0.12 5800 8 0.12 3000 27 0.12 2800 30 0.12 4 LC (A) 150 864 864 132 75 Standard (Reel size : f380) Min. Packaging Q'ty Part number (pcs) 16SVPG47M 2500 16SVPG270MX 900 16SVPG270M 500 20SVPG33M 2500 25SVPG15M 2500 1 Ripple current (100 kHz/ +105 C ), 2 ESR (100 kHz to 300 kHz/+20 C) 3 tan d (120 Hz/+20 C) 4 After 2 minutes Please refer to each page in this catarog for "Reflow conditions" and "Taping specifications". Frequency correction factor for ripple current Frequency Coefficient 120 Hz < f < 1 kHz 0.05 1 kHz < f < 10 kHz 0.3 10 kHz < f < 100 kHz 0.7 100 kHz < f < 500 kHz 1 Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 02 Nov. 2017 Guidelines and precautions regarding the technical information and use of our products described in this online catalog. If you want to use our products described in this online catalog for applications requiring special qualities or reliability, or for applications where the failure or malfunction of the products may directly jeopardize human life or potentially cause personal injury (e.g. aircraft and aerospace equipment, traffic and transportation equipment, combustion equipment, medical equipment, accident prevention, anti-crime equipment, and/or safety equipment), it is necessary to verify whether the specifications of our products fit to such applications. Please ensure that you will ask and check with our inquiry desk as to whether the specifications of our products fit to such applications use before you use our products. The quality and performance of our products as described in this online catalog only apply to our products when used in isolation. Therefore, please ensure you evaluate and verify our products under the specific circumstances in which our products are assembled in your own products and in which our products will actually be used. If you use our products in equipment that requires a high degree of reliability, regardless of the application, it is recommended that you set up protection circuits and redundancy circuits in order to ensure safety of your equipment. The products and product specifications described in this online catalog are subject to change for improvement without prior notice. Therefore, please be sure to request and confirm the latest product specifications which explain the specifications of our products in detail, before you finalize the design of your applications, purchase, or use our products. The technical information in this online catalog provides examples of our products' typical operations and application circuits. We do not guarantee the non-infringement of third party's intellectual property rights and we do not grant any license, right, or interest in our intellectual property. If any of our products, product specifications and/or technical information in this online catalog is to be exported or provided to non-residents, the laws and regulations of the exporting country, especially with regard to security and export control, shall be observed. <Regarding the Certificate of Compliance with the EU RoHS Directive/REACH Regulations> The switchover date for compliance with the RoHS Directive/REACH Regulations varies depending on the part number or series of our products. When you use the inventory of our products for which it is unclear whether those products are compliant with the RoHS Directive/REACH Regulation, please select "Sales Inquiry" in the website inquiry form and contact us. We do not take any responsibility for the use of our products outside the scope of the specifications, descriptions, guidelines and precautions described in this online catalog. 01-Apr-19