GT5-1PP-HU(A) - Hirose Electric

Coaxial cable connection of Antennas, Sensors, and Communication Trunk Lines

Termination of coaxial cables in automotive, medical and instrumentation applications

utilizes a single motion to crimp the center conductor, shield and outer insulation.

GT5 Series

— Connectors for coaxial cables —

Several types and configurations: In-line, board mounted, combinations of

coaxial cable with signal/power, Multi-position and color/ keying variations.

Features

USCAR Standard titled "Square Outer Conductor (SAE/USCAR-19)" excludes Water Proof type (GT5W)

Cost efficient termination

Highly efficient and reliable single motion "Twin Crimp TM " termination allows high volume production with

semi-automatic equipment.

Space-saving Design

Lock-release latching system

Shock / vibration resistant electrical connections

Verification of the full contact insertion

Color and polarizing variations

Excellent High Frequency Performance

Refer to V.S.W.R. data on the following pages.

Applications

In-car communication, car sensors (temperature, pressure), automotive audio systems, GPS antenna systems,

RACS antenna audio/video antenna systems, CRT displays, medical and measuring instrumentation, variety of

communication equipment, office automation equipment, LAN systems.

*"Twin Crimp"is a registered trade mark of Hirose Electric.

SAE/USCAR-19

BTest Data (Using 1.5D-2V Type cable)

High Frequency Characteristics (V.S.W.R.)

BTermination sequence

Note: Typical data using fully assemblied and connected GT5-1S-HU and the GT5-1PP-HU.

2. Crimp the cable to the terminal.

4. Fully insert the retainer.3. Insert the terminal in the housing until is fully locked.

1. Strip the cable.

Terminals for coaxial shielded cable

F Connector Terminals

GT5-30/0.7-1.5SCF

GT5-2428/1.6-2.5SCF

GT5-30/1.6-2.9SCF

GT5-2428/1.6-2.9SCF

GT5-2022/1.6-2.9SCF

GT5-2022/F2.7-3.5SCF

GT5-2022/F3.3-3.8SCF

GT5-30/3.3-5SCF

GT5-2428/F3.3-5SCF

GT5-2022/F3.3-5SCF

GT5-30/F4-5SCF

GT5-2428/F4-5SCF

GT5-2022/F4-5SCF

755-0065-1

755-0078-3

755-0022-9

755-0002-1

755-0071-4

755-0077-0

755-0054-5

755-0016-6

755-0012-5

755-0034-8

755-0020-3

755-0024-4

755-0036-3

#30 or equivalent

#24 to 28 or equivalent

#20 to 22 or equivalent

#30 or equivalent

#24 to 28 or equivalent

#20 to 22 or equivalent

#30 or equivalent

#24 to 28 or equivalent

#20 to 22 or equivalent

Part Number CL No.

Inner Insulation

Diameter

0.6 to 0.9mm

1.5 to 2.0mm

2.4 to 2.9mm

2.5 to 2.9mm

3.0 to 3.6mm

1.4 to 1.8mm

2.3 to 2.7mm

2.6 to 3.4mm

3.3 to 3.7mm

3.6 to 4.0mm

4.6 to 5.0mm

1,300 pcs. per reel

1,100 pcs. per reel

Outer

Diameter Packaging

Conductor Size (AWG)

Note: Products marked with an asterisk (*) indicate polyethylene foam insulation.

Part

Insulator

Crimp terminals

Outer terminals

Material

PBT

Phosphor bronze

Brass

Finish

Color: Dark gray

Tin plating

GT5-30/0.7-1.5PCF

GT5-30/1.6-2.9PCF

GT5-2428/1.6-2.9PCF

GT5-2022/1.6-2.9PCF

GT5-2022/F2.7-3.5PCF

GT5-2022/F3.3-3.8PCF

GT5-30/F3.3-5PCF

GT5-2428/F3.3-5PCF

GT5-2022/F3.3-5PCF

GT5-30/F4-5PCF

GT5-2428/F4-5PCF

GT5-2022/F4-5PCF

755-0017-9

755-0021-6

755-0001-9

755-0094-0

755-0076-8

755-0053-2

755-0015-3

755-0011-2

755-0033-5

755-0019-4

755-0023-1

755-0035-0

#30 or equivalent

#24 to 28 or equivalent

#20 to 22 or equivalent

#30 or equivalent

#24 to 28 or equivalent

#20 to 22 or equivalent

#30 or equivalent

#24 to 28 or equivalent

#20 to 22 or equivalent

Part Number CL No.

Inner Insulation

Diameter

0.6 to 0.9mm

1.5 to 2.0mm

2.4 to 2.9mm

2.5 to 2.9mm

3.0 to 3.6mm

1.4 to 1.8mm

2.6 to 3.4mm

3.3 to 3.7mm

3.6 to 4.0mm

4.6 to 5.0mm

900 pcs. per reel

Outer

Diameter Packaging

Conductor Size (AWG)

Note: Products marked with an asterisk (*) indicate polyethylene foam insulation.

Part

Insulator

Crimp terminals

Outer terminals

Material

PBT

Brass

Finish

Color: Dark gray

Tin plating

M Connector Terminals

Low-insertion M Connector Terminals

Part

Insulator

Crimp terminals

Outer terminals

Material

PBT

Brass

Finish

Color: Dark gray

Tin plating

GT5L-30/0.7-1.5PCF

GT5L-30/1.6-2.9PCF

GT5L-2428/1.6-2.9PCF

GT5L-2428/1.6-2.5PCF

755-0068-0

755-0067-7

755-0066-4

755-0079-6

#30 or equivalent

#24 to 28 or equivalent

Part Number HRS No.

Inner Insulation

Diameter

0.6 to 0.9mm

1.5 to 2.0mm

1.4 to 1.8mm

2.6 to 3.4mm

900 pcs. per reel

Outer

Diameter Packaging

Conductor Size (AWG)

F Connectors

For Single-Conductor coaxial shielded cable

Housing

GT5R-1S/HU

GT5-1S-HU

Terminal extraction tool: GT-PO(A), Note 1: concept only

Figure qFigure wFigure e

Figure rFigure tFigure y

Figure uFigure iFigure o

Retainer (-Optional-Used with the housings: GT5-1S-HU, GT5-1PP-

HU, GT5N-1PP-HU, GT5H-1PP-HU, and GT5-1PB-HU)

Housing (Not requiring use of the retainer)

Part Number

GT5-1P/S-R

CL No. Material Color

755-0006-2 PBT Dark gray

Part Number

GT5R-1S-HU

CL No. Material Color

755-0047-0 PBT Light gray

Terminal extraction tool: GT-PO(A)

Keying Configurations

GT5-1S-HU

GT5-1S-HU(A)

GT5-1S-HU(B)

GT5-1S-HU(C)

GT5-1S-HU(D)

GT5-1S-HU(E)

GT5-1S-HU( I )

GT5-1S-HU(J)

GT5-1S-HU(K)

755-0004-7

755-0037-6

755-0038-9

755-0080-5

755-0081-8

755-0082-0

Note 1

Light gray

Brown

Green

Blue

Purple

Pink

Black

Cream white

Pastel orange

Figure q

Figure w

Figure e

Figure r

Figure t

Figure y

Figure u

Figure i

Figure o

GT5-1PP-HU

GT5-1PP-HU(A)

GT5-1PP-HU(B)

GT5-1PP-HU(C)

GT5-1PP-HU(D)

GT5-1PP-HU(E)

GT5-1PP-HU( I )

GT5-1PP-HU(J)

GT5-1PP-HU(K)

GT5-1P-DS

GT5-1P-DS(A)

GT5-1P-DS(B)

GT5-1P-DS(C)

GT5-1P-DS(D)

GT5-1P-DS(E)

GT5-1P-DS( I )

GT5-1P-DS(J)

GT5-1P-DS(K)

Part Number CL No. Material Color

Key polarizing

code

Corresponding M Connector

Housing- In-line

Corresponding M Connector

Assembly- Board Mounting

USCAR-19

Coding

PBT

Shown with inserted retainer.

Retainer

Housing

Figure qFigure wFigure e

Figure rFigure tFigure y

Figure uFigure iFigure o

M Connectors

GT5-1PP-HU

GT5-1PP-HU(A)

GT5-1PP-HU(B)

GT5-1PP-HU(C)

GT5-1PP-HU(D)

GT5-1PP-HU(E)

GT5-1PP-HU( I )

GT5-1PP-HU(J)

GT5-1PP-HU(K)

755-0005-0

755-0039-1

755-0040-0

755-0103-9

755-0104-1

755-0105-4

Note 1

Light Gray

Brown

Green

Blue

Purple

Pink

Black

Cream white

Pastel orange

Figure q

Figure w

Figure e

Figure r

Figure t

Figure y

Figure u

Figure i

Figure o

Part Number CL No. Corresponding F Connector

Housing Color

Key polarizing

code

USCAR-19

Coding

* Refer to pages 32 and 34 for panel brackets used with in-line connectors.

* Terminal extraction tool: GT-PO(A)

Note 1: concept only

GT5-1S-HU

GT5-1S-HU(A)

GT5-1S-HU(B)

GT5-1S-HU(C)

GT5-1S-HU(D)

GT5-1S-HU(E)

GT5-1S-HU( I )

GT5-1S-HU(J)

GT5-1S-HU(K)

Part

Housing

Ground terminal

Material

PBT

Phosphor bronze

Finish

Color: Dark gray

Tin plating

Mounting bracket

attachment side

Outside ground connection

Housing (For use with H type mounting

bracket)

Housing (For use with N type mounting

bracket)

BFully mated connector assemblies.

Part Number

GT5H-1PP-HU (10)

GT5H-1PP-HU (41)

CL No.

755-0093-7 10

755-0093-7 41

Color Corresponding F Connector

Housing

Light Gray

Blue

GT5-1S-HU

GT5R-1S-HU

Part Number

GT5N-1PP-HU

CL No.

755-0090-9

Color Corresponding F Connector

Housing

Light Gray GT5-1S-HU

GT5R-1S-HU

Keying Configurations

Shown with inserted retainer.

Retainer

Housings

Panel mounting, enhanced

shielding configuration

Part Number

GT5A-1PP-HU

CL No.

755-0025-7

Part Material Finish

Housing

Ground terminal

PBT

Brass

Color: Light gray

Tin plating

[]

BRecommended Panel Cut-out

BMounted and fully mated connector

assemblies

BRecommended Panel Cut-out

BMounted and fully mated

connectorassemblies

Panel

thickness:1.6

M 3

Note 1: Terminal extraction tool: GT-PO(A)

Note 2: Retainer is optional.

Note 3: Use mounting screws of M3 with nominal diameter 3L-6 (for a panel thickness of 1.6 mm).

Part Number

GT5P-1PP-HU

CL No.

755-0030-7

Part Material Finish

Housing

Ground terminal

PBT

Brass

Color: Light gray

Tin plating

Note 1: Terminal extraction tool: GT-PO(A)

Note 2: Retainer is optional.

Note 3: Use mounting screws of M3 with nominal diameter 3L-6 (for a panel thickness

of 1.6 mm).

Panel

thickness:1.6

Chassis

Assembly Diagram (1:1)

Chassis

Assembly Diagram (1:1)

BRecommended Panel Cut-out

Part Number

GT5B-1PP-HU

CL No.

755-0051-7

Part Material Finish

Housing

Ground terminal

PBT

Copper alloy

Color: Light gray

Tin plating

Note 1: Terminal extraction tool: GT-PO(A) with nominal diameter 3L-6 (for a board

thickness of 1.6 mm).

Note 2: Retainer is optional.

Note 3: Use mounting screws of M3 with nominal diameter 3L-6 (for a panel thickness

of 1.6 mm).

Part Number

GT5S-1PP-HU

CL No.

755-0050-4

Part Material Finish

Housing

Ground terminal

PBT

Copper alloy

Color: Light gray

Tin plating

Note 1: Terminal extraction tool: GT-PO(A) with nominal diameter 3L-6 (for a board

thickness of 1.6 mm).

Note 2: Retainer is optional.

Note 3: Use mounting screws of M3 with nominal diameter 3L-6 (for a panel thickness

of 1.6 mm).

BMounted and fully mated connector

assemblies

BMounted and fully mated connector

assemblies

Connector assembly, Printed

Circuit Board Mounting Type

Figure qFigure wFigure e

GT5-1P-DS

GT5-1P-DS(A)

GT5-1P-DS(B)

GT5-1P-DS(C)

GT5-1P-DS(D)

GT5-1P-DS(E)

GT5-1P-DS(I)

GT5-1P-DS(J)

GT5-1P-DS(K)

755-0007-5

755-0041-3

755-0042-6

755-0083-3

755-0084-6

755-0085-9

Note 2

Figure q

Figure w

Figure e

Figure r

Figure t

Figure y

Figure u

Figure i

Figure o

GT5-1P-DS

GT5-1P-DS(A)

GT5-1P-DS(B)

GT5-1P-DS(C)

GT5-1P-DS(D)

GT5-1P-DS(E)

GT5-1P-DS(I)

GT5-1P-DS(J)

GT5-1P-DS(K)

GT5-1S-HU

GT5-1S-HU(A)

GT5-1S-HU(B)

GT5-1S-HU(C)

GT5-1S-HU(D)

GT5-1S-HU(E)

GT5-1S-HU(I)

GT5-1S-HU(J)

GT5-1S-HU(K)

Part Number CL No. Color

Key polarizing

code

M Connector-Board Type

Corresponding F Connector

Housing

Note1: Use mounting screws of M3 with nominal diameter 3L-6 (for a board thickness of 1.6 mm).

Note2: concept only

Light Gray

Brown

Green

Blue

Purple

Pink

Black

Cream white

Pastel orange

Part

Housing

0.65 x 1.1 Terminals

Insulator

Outer terminals

Material

PBT

Brass

PBT

Phosphor bronze

Finish

Tin plating

Dark gray

Tin plating

BRecommended PCB Mounting Pattern

For outer conductor

For inner conductor

Outlines

BDiagram of Mated Connector in Use

Figure rFigure tFigure y

Figure uFigure iFigure o

11.8

F Connectors

Two-position type-Each Single-Conductor coaxial cable

Figure qFigure wFigure eFigure r

Housing

GT5-2S-HU

GT5-2S-HU(A)

GT5-2S-HU(B)

GT5-2S-HU(C)

755-0044-1

755-0059-9

755-0060-8

755-0097-8

Figure q

Figure w

Figure e

Figure r

Part Number CL No. Color

Key polarizing

code

USCAR-19

Coding

Note 1: Terminal extraction tool: GT-PO(A)

Note 2: Used with separate retainer (GT-5-2P/S-R).

Light Gray

Brown

Green

Blue

Material

PBT Shown with inserted retainer.

M Connectors

Housing[Panel Mounted Housing]

Figure qFigure wFigure eFigure r

GT5-2PP-HU

GT5-2PP-HU(A)

GT5-2PP-HU(B)

GT5-2PP-HU(C)

755-0045-4

755-0063-6

755-0064-9

Part Number CL No.

Key polarizing

code

Note: Used with separate retainer (GT-5-2P/S-R).

Coding D2 at USCAR-19 is GT5-2PP-HU.

Figure q

Figure w

Figure e

Figure r

Color

Light Gray

Brown

Green

Blue

Tin plating

BRecommended Mounting Bracket dimensions.

BFully mated connector assemblies

Part

Housing

Ground terminal

Material

PBT

Phosphor bronze

Finish

Tin plating

BKeying Configurations

Figure qFigure wFigure eFigure r

GT5-2P-DS (D)

Recommended Panel Cut-out

GT5-2P-DS (A) GT5-2P-DS (B) GT5-2P-DS (C)

Housing

Retainer – 2 position (Used with GT5-2S-HU, GT5-2PP-HU,

and GT5N-2PP-HU)

Housing

GT5N-2PP-HU 755-0055-8

Part Number CL No. Color

Note 1:Terminal extraction tool: GT-PO(A)

Note 2: Used with separate retainer (GT-5-2P/S-R).

Light gray

Material

PBT

BDiagram of Mated Connector in Use

GT5-2P/S-R 755-0046-7

Part Number CL No. Color

Dark gray

Material

PBT

GT5-2P-DS

GT5-2P-DS(A)

GT5-2P-DS(B)

GT5-2P-DS(C)

755-0043-9

755-0061-0

755-0062-3

Figure q

Figure w

Figure e

Figure r

Part Number CL No. Color

Key polarizing

code

USCAR-19

Coding

Note: Use mounting screws of M3 with nominal diameter 3L-6 (for a

board thickness of 1.6 mm).

Coding D2 at USCAR-19 is GT5-2P-DS.

Light Gray

Brown

Green

Blue

Material

PBT

BRecommended Board Mounting

Pattern

BMounted and fully mated

connector assemblies

For outer conductor

For inner conductor

Panel

BKeying Configurations

Board Thickness : 1.6mm

Power Supply Terminals

F Connector Terminals

M Connector Terminals

GT7-2022SCF

GT7A-2022SCF

757-0001-1

757-0003-7

#20 to 22

Part Number CL No.

5,000

3,000

Material Finish Conductor Size (AWG) Outer

Diameter Packaging

Note 1: Sold by the reel. (See above table for number of Packaging.)

Note 2: This component is used only with applicable HRS housings.

Copper alloy Tin plating 1.4 to 2.4mm

2.6 to 3.1mm

GT7-2022PCF

GT7A-2022PCF

757-0002-4

757-0004-0

Part Number CL No.

5,000

3,000

Material Finish Outer

Diameter Packaging

Note 1: Sold by the reel. (See above table for number of Packaging.)

Note 2: This component is used only with applicable HRS housings.

Brass Tin plating 1.4 to 2.4mm

2.6 to 3.1mm

(For use with combination type assemblies:

GT5-2/1S-HU, GT5-2/1P-DS, GT5-2/1PP-HU, GT5N-2/1PP-HU)

Combinaton Type (Two Single-Conductor Coaxial Cables + One Power contact)

F Connectors

Housing

GT5-2/1S-HU 755-0009-0

Part Number CL No. Color

Note 1:Terminal extraction tool: GT-PO(A)

Note 2: Used with separate retainer (GT5-2/1S-R).

Light gray

Material

PBT

BShown with inserted retainer.

Retainer (exclusively for GT5-2/1S-HU)

GT5-2/1S-R 755-0003-4

Part Number CL No. Color

Dark gray

Material

PBT

M Connectors

Connector assembly, Printed

Circuit Board mounting

GT5-2/1P-DS 755-0014-0

Part Number CL No.

Note: Use mounting screws of M3 with nominal diameter 3L-6 (for a board thickness of 1.6 mm).

Housing

0. 64x1.1 Terminal

Insulator

Outer terminal

Tub terminal for DS 070

PBT

Brass

PBT

Phosphor bronze

Brass

Color: Light gray

Tin plating

Dark gray

Tin plating

Part Material Finish

Recommended Board Mounting Pattern

Thickness :

1.6mm

For power supply

For inner conductor

For outside conductor

Retainer

Board

Recommended Panel Cut-out

M Connectors

GT5-2/ 1PP-R

Housing - with External Ground

Part Number

GT5-2/1PP-HU

CL No.

755-0008-8

Part Material Finish

Housing

Ground terminal

PBT

Phosphor bronze

Color: Light gray

Tin plating

Note 1: Terminal extraction tool: GT-PO(A)

Note 2: Used with separate retainer (GT5-2/1PP-R ).

Mounting bracket

attachment side

Outside ground connection

BShown with inserted retainer.

Tin plating finish

min.

Part Number

GT5N-2/1PP-HU

CL No.

755-0013-8

Material Color

PBT Light gray

Note 1: Terminal extraction tool: GT-PO(A)

Note 2: Used with separate retainer GT5-2/1PP-R and mounting bracket GT-BK or GT-BK (01).

Retainer (Used with GT5N-2/1PP-HU and GT5-2/1PP-HU)

Part Number

GT5-2/1PP-R

CL No.

755-0010-0

Material Color

PBT Dark gray

Recommended Mounting Bracket Dimensions

Retainer

Housing - without External Ground

F Connectors

Part Number

GT5-4S-HU

CL No.

755-0056-0

Material Color

USCAR-19

Coding

PBT Light gray D4

Note: Used with separate retainer (GT-5-4P/S-R).

M Connectors

Part Number

GT5N-4PP-HU

CL No.

755-0057-3

Material Color

USCAR-19

Coding

PBT Light gray D4

Note 1: The product should be used with a low-force insertion/withdrawal M connector

terminal.

Note 2: Used with separate retainer GT-5-4P/S-R.

Retainer (Used with GT5-4S-HU and GT5N-4PP-HU)

Part Number

GT5-4P/S-R

CL No.

755-0058-6

Material Color

PBT Dark gray

4-Position – Single conductor Coaxial cable BShown with inserted retainer.

M Connectors

BRecommended Board Mounting Pattern BRecommended Panel Cut-out

BRecommended Board and Panel installation

GT5-4P-DS 755-0087-4 D4

Part Number CL No.

USCAR-19

Coding

For inner conductors

For outer conductors

PCB Board Outline

Panel

Board

Connector assembly, Printed Circuit

Board Mounting

Panel Outline

M3 Screw

Single Conductor Coaxial Cable - Waterproof Type

F Connectors

Housing

Part Number

GT5W-1S-HU

CL No.

755-0027-2

MaterialColor

PBT Light gray

Note: Specific retainer is determined by the type of the cable used.

Note: Outer diameter of the cable must be within 2.9 to 3.4 mm. Consult nearest HRS

representative for other diameters.

Retainer (Used with GT5W-1P-HU, GT5JW-1PP-HU,

GT5W-1S-HU and GT5W-1P-HU)

Part Number

GT5W-1P/S-R

CL No.

755-0028-5

MaterialColor

PBT

Silicon rubber Compound

Dark gray

M Connectors

Housing

Part Number

GT5W-1P-HU

CL No.

755-0026-0

Part Material Color

Housing

Connector seal

PBT

Silicon rubber

Light gray

White

Note: Use correct retainer.

GT5W-1PP-HU

GT5JW-1PP-HU

755-0070-1

755-0069-2

Part Number CL No. B

1.3

3.0

1.5

3.2

Part

Housing

Connector seal

Material

PBT

Silicon rubber Compound

Color

Light gray

White

BMounted and fully mated connector assemblies

BRecommended Bracket Dimensions

Housing - Bracket Mounting

G Terminals

For Direct Coaxial Cable Termination

1.5D-2V or equivalent

Part Number

GTB-1.6CF

CL No.

755-0049-5

Material Finish Packaging

Brass Tin plating 1,500 pcs. Per reel

Part Number

G-1.6PCF

CL No.

755-0029-8

Material Finish Packaging

Brass Tin plating 1,500 pcs. Per reel

BBoard Termination Pattern

BCompleted Termination cross section

Board Termination Pattern

BCompleted Termination cross section

Board Termination Pattern

BCompleted Termination cross section

Heat-shrink tubing

Pre-solder

1.5D-2V or equivalent

Heat-shrink tubing

Lands

Part Number

GTA-1.6CF

CL No.

755-0032-2

Material Finish Packaging

Brass Tin plating 1,500 pcs. Per reel

For Direct Coaxial Cable Termination

Raised point of contact

For Mid-Cable Termination

Part Number

GT-1.6PG-C

CL No.

755-0031-0

Material Finish Packaging

Brass Tin plating 1

BRecommended Panel Cut-out BAttachment Diagram

Setscrew (M2.5)

For use with coaxial cables 2.9

to 3.4 mm. outside diameter.

Panel

BRecommended Board

Termination Pattern

BCompleted Termination Cross Section

BRecommended Board

Termination Pattern

BRecommended Completed Termination cross

section

Part Number

GTA-0.7CF

CL No.

755-0074-2

Material Finish Packaging

Brass Tin plating 1,500 pcs. Per reel

Part Number

GTB-0.7CF

CL No.

755-0075-5

Material Finish Packaging

Brass Tin plating 1,500 pcs. Per reel

Pre-solder

Lands

Bottom Shield cover

Part Number

GT5-1P/S-CSB

CL No.

755-0048-2

Material Finish

Brass Tin plating

Mounted Condition Installed

GT5C-1P-CSB 755-0088-7

Part Number CL No.

Top Shield covers

For Improved Electronic Noise Compatibility

Automatic crimping machine

* Crimp height setting tables are available for each cable type. Please contact your

nearest Hirose Electric account representative.

Different cables will require different crimp height settings.

BTermination Tools

User's manuals are available. Please ask your Hirose Electric account representative.

GT-BK

GT-BK (01)

Panel Mounting In-line Bracket

Item

Specification

Stroke length

Number of strokes

Weight

Motor

Crimping speed

Specification

1.5tons

30mm

200spm(50Hz)

75kg

0.2kW

2000 to 4000pcs. Per day

Remarks

200spm(60Hz)

AC100V

Specifications

Part Number

GT-BK

GT-BK(01)

CL No.

751-0039-6

751-0039-6-01

Material Finish Used with connectors

SPCC

Tin plating

Zinc plating

GT5-1PP-HU(A),GT5-1PP-HU(B),GT5-1PP-

HU(C),GT5-1PP-HU(D),GT5-1PP-HU(E),GT5-1PP-

HU(F),GT5-1PP-HU(G),GT5-1PP-HU(H),GT5-

2/1PP-HU,GT5-2/1PP-HU(A),GT5-2/1PP-HU(A)

Part Number CM-105