2N5883, 2N5884 (PNP) 2N5885, 2N5886 (NPN) 2N5884 and 2N5886 are Preferred Devices Complementary Silicon High-Power Transistors Complementary silicon high-power transistors are designed for general-purpose power amplifier and switching applications. Features 25 AMPERE COMPLEMENTARY SILICON POWER TRANSISTORS 60 - 80 VOLTS, 200 WATTS * Low Collector-Emitter Saturation Voltage - * * * * http://onsemi.com VCE(sat) = 1.0 Vdc, (max) at IC = 15 Adc Low Leakage Current ICEX = 1.0 mAdc (max) at Rated Voltage Excellent DC Current Gain - hFE = 20 (min) at IC = 10 Adc High Current Gain Bandwidth Product - ft = 4.0 MHz (min) at IC = 1.0 Adc Pb-Free Packages are Available* IIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIII IIIIIIIIIIII III IIIII II IIIIIIIIIIII III IIIII II IIIIIIIIIIII III IIIII II IIIIIIIIIIII III IIIII II IIIIIIIIIIII III IIIII II IIIIIIIIIIII III IIIII II IIIIIIIIIIII III IIIII II IIIIIIIIIIII III IIIII II IIIIIIIIIIII III IIIII II IIIIIIIIIIII III IIIII II IIIIIIIIIIII III IIIII II III I IIII II IIIIIIIIIIII IIIII IIIIIIIIIIII III IIIII II IIIIIIIIIIIIIIIIIII IIIIIIIIIIII III IIIII II IIIIIIIIIIII III IIIII II IIIIIIIIIIII III IIIII II TO-204AA (TO-3) CASE 1-07 STYLE 1 MAXIMUM RATINGS (Note 1) Rating Symbol Collector-Emitter Voltage 2N5883, 2N5885 2N5884, 2N5886 VCEO Collector-Base Voltage Value Unit Vdc 60 80 VCB 2N5883, 2N5885 2N5884, 2N5886 Emitter-Base Voltage Vdc 60 80 VEB 5.0 Vdc Collector Current - Continuous Peak IC Base Current IB 7.5 Adc Total Device Dissipation @ TC = 25C Derate above 25C PD 200 1.15 W W/C TJ, Tstg - 65 to + 200 C Operating and Storage Junction Temperature Range MARKING DIAGRAM 2N588xG AYYWW MEX Adc 25 50 THERMAL CHARACTERISTICS Characteristic Symbol Max Unit Thermal Resistance, Junction-to-Case qJC 0.875 C/W Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the Recommended Operating Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect device reliability. 1. Indicates JEDEC registered data. Units and conditions differ on some parameters and re-registration reflecting these changes has been requested. All above values most or exceed present JEDEC registered data. 2N588x G A YY WW MEX = Device Code x = 3, 4, 5, or 6 = Pb-Free Package = Assembly Location = Year = Work Week = Country of Origin ORDERING INFORMATION See detailed ordering and shipping information in the package dimensions section on page 5 of this data sheet. Preferred devices are recommended choices for future use and best overall value. *For additional information on our Pb-Free strategy and soldering details, please download the ON Semiconductor Soldering and Mounting Techniques Reference Manual, SOLDERRM/D. (c) Semiconductor Components Industries, LLC, 2006 March, 2006 - Rev. 11 1 Publication Order Number: 2N5883/D 2N5883, 2N5884 (PNP) 2N5885, 2N5886 (NPN) IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIIII IIII IIIIIII III IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIIII IIII IIIIIII III IIIIIIIIIIIIIIIIIIIIIII IIII IIII III III IIIIIIIIIIIIIIIIIIIIIII IIII IIII III III IIIIIIIIIIIIIIIIIIIIIII IIII IIII III III IIIIIIIIIIIIIIIIIIIIIII IIII IIIIIII III IIIIIIIIIIIIIIIIIIIIIII IIII IIII III III IIIIIIIIIIIIIIIIIIIIIII IIII IIII III III IIIIIIIIIIIIIIIIIIIIIII IIII III IIII III IIIIIIIIIIIIIIIIIIIIIII IIII IIII III III IIIIIIIIIIIIIIIIIIIIIII IIII IIII III III IIIIIIIIIIIIIIIIIIIIIII IIII IIII III III IIIIIIIIIIIIIIIIIIIIIII IIII IIIIIII III IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIIII IIII IIII III III IIIIIIIIIIIIIIIIIIIIIII IIII IIII III III IIII III IIIIIIIIIIIIIIIIIIIIIII IIII III IIIIIIIIIIIIIIIIIIIIIII IIII IIII III III IIIIIIIIIIIIIIIIIIIIIII IIIIIIII III III IIII III IIIIIIIIIIIIIIIIIIIIIII IIII III IIIIIIIIIIIIIIIIIIIIIII IIII IIII III III IIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII IIII IIII III IIIIIIIIIIIIIIIIIIIIIII IIII IIIIIII III III IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIIII IIII IIII III III IIIIIIIIIIIIIIIIIIIIIII IIII IIII III III IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIIII IIII IIII III III IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIII IIIIIIIIIIIII IIII IIII III III IIIIIIIIIII IIII IIIIIII III IIIIIIIIIIIII IIIIIIIIIIIII IIIIIIIIIII IIII IIII III III IIIIIIIIIII IIIIIIIIIIIIIIIII IIIIIII III ELECTRICAL CHARACTERISTICS (Note 2) (TC = 25C unless otherwise noted) Characteristic Collector-Emitter Sustaining Voltage (Note 3) (IC = 200 mAdc, IB = 0) 2N5883, 2N5885 2N5884, 2N5886 Collector Cutoff Current (VCE = 30 Vdc, IB = 0) (VCE = 40 Vdc, IB = 0) 2N5883, 2N5885 2N5984, 2N5886 Collector Cutoff Current (VCE = 60 Vdc, VBE(off) = 1.5 Vdc) (VCE = 80 Vdc, VBE(off) = 1.5 Vdc) (VCE = 60 Vdc, VBE(off) = 1.5 Vdc, TC = 150C) (VCE = 80 Vdc, VBE(off) = 1.5 Vdc, TC = 150C) 2N5883, 2N5885 2N5884, 2N5886 2N5883, 2N5885 2N5884, 2N5886 Collector Cutoff Current (VCB = 60 Vdc, IE = 0) (VCB = 80 Vdc, IE = 0) 2N5883, 2N5885 2N5884, 2N5886 Symbol Min Max Unit VCEO(sus) 60 80 - - Vdc - - 2.0 2.0 mAdc - - - - 1.0 1.0 10 10 mAdc - - 1.0 1.0 mAdc - 1.0 mAdc 35 20 4.0 - 100 - - - 1.0 4.0 Vdc ICEO ICEX ICBO Emitter Cutoff Current (VEB = 5.0 Vdc, IC = 0) IEBO ON CHARACTERISTICS DC Current Gain (Note 3) (IC = 3.0 Adc, VCE = 4.0 Vdc) (IC = 10 Adc, VCE = 4.0 Vdc) (IC = 25 Adc, VCE = 4.0 Vdc) hFE Collector-Emitter Saturation Voltage (Note 3) (IC = 15 Adc, IB = 1.5 Adc) (IC = 25 Adc, IB = 6.25 Adc) VCE(sat) Base-Emitter Saturation Voltage (Note 3) VBE(sat) - 2.5 Vdc VBE(on) - 1.5 Vdc Base-Emitter On Voltage (Note 3) (IC = 25 Adc, IB = 6.25 Adc) (IC = 10 Adc, VCE = 4.0 Vdc) DYNAMIC CHARACTERISTICS Current-Gain - Bandwidth Product (Note 4) (IC = 1.0 Adc, VCE = 10 Vdc, ftest = 1.0 MHz) Output Capacitance (VCB = 10 Vdc, IE = 0, f = 1.0 MHz) 2N5883, 2N5884 2N5885, 2N5886 Small-Signal Current Gain (IC = 3.0 Adc, VCE = 4.0 Vdc, ftest = 1.0 kHz) fT 4.0 - MHz Cob - - 1000 500 pF hfe 20 - - tr - 0.7 ms ts - 1.0 ms tf - 0.8 ms SWITCHING CHARACTERISTICS Rise Time (VCC = 30 Vdc, IC = 10 Adc, IB1 = IB2 = 1.0 Adc) Storage Time Fall Time 2. Indicates JEDEC Registered Data. 3. Pulse Test: Pulse Width v 300 ms, Duty Cycle v 2.0%. 4. fT = |hfe| * ftest. PD, POWER DISSIPATION (WATTS) 200 175 150 125 100 75 50 25 0 0 25 50 75 100 125 150 TC, CASE TEMPERATURE (C) Figure 1. Power Derating http://onsemi.com 2 175 200 2N5883, 2N5884 (PNP) 2N5885, 2N5886 (NPN) VCC -30 V TURN-ON TIME RL +2.0 V 3.0 10 0 TO SCOPE tr 20 ns RB tr 20ns 2.0 -11V 0.7 0.5 10 to 100 ms VCC TURN-OFF TIME RL +9.0V 10 3.0 TO SCOPE tr 20 ns 0 RB tr 20ns 10 to 100 ms -30 V t, TIME (s) DUTY CYCLE 2.0% -11V TJ = 25C IC/IB = 10 VCC = 30 V VBE(off) = 2 V 1.0 0.3 tr 0.2 0.1 2N5883, 2N5884 (PNP) 2N5885, 2N5886 (NPN) td 0.07 0.05 0.03 VBB +7.0 V 0.02 0.3 DUTY CYCLE 2.0% 0.5 0.7 1.0 2.0 3.0 5.0 7.0 10 IC, COLLECTOR CURRENT (AMPERES) FOR CURVES OF FIGURES 3 & 6, RB & RL ARE VARIED. INPUT LEVELS ARE APPROXIMATELY AS SHOWN. FOR NPN, REVERSE ALL POLARITIES. 20 30 Figure 3. Turn-On Time Figure 2. Switching Time Equivalent Test Circuits r(t), EFFECTIVE TRANSIENT THERMAL RESISTANCE (NORMALIZED) 1.0 0.5 D = 0.5 0.2 0.2 0.1 0.1 0.05 0.05 0.02 0.02 SINGLE PULSE P(pk) qJC(t) = r(t) qJC qJC = 0.875C/W MAX D CURVES APPLY FOR POWER PULSE TRAIN SHOWN t1 READ TIME AT t1 t2 TJ(pk) - TC = P(pk) qJC(t) DUTY CYCLE, D = t1/t2 0.01 0.01 0.02 0.05 0.1 0.2 0.5 1.0 2.0 5.0 10 t, TIME (ms) 20 50 100 200 500 1000 2000 Figure 4. Thermal Response IC, COLLECTOR CURRENT (AMPERES) 100 There are two limitations on the power handling ability of a transistor: average junction temperature and second breakdown. Safe operating area curves indicate I C - V CE limits of the transistor that must be observed for reliable operation; i.e., the transistor must not be subjected to greater dissipation than the curves indicate. The data of Figure 5 is based on T J(pk) = 200C; TC is variable depending on conditions. Second breakdown pulse limits are valid for duty cycles to 10% provided T J(pk) v 200C. T J(pk) may be calculated from the data in Figure 4. At high case temperatures, thermal limitations will reduce the power that can be handled to values less than the limitations imposed by second breakdown. 500 ms 50 1ms 20 dc 10 5ms TJ = 200C SECOND BREAKDOWN LIMITED BONDING WIRE LIMITED THERMAL LIMITATION @ TC = 25C (SINGLE PULSE) CURVES APPLY BELOW RATED VCEO 5.0 2.0 1.0 0.5 0.2 0.1 1.0 2N5883, 2N5885 2N5884, 2N5886 2.0 3.0 5.0 7.0 10 20 30 50 70 VCE, COLLECTOR-EMITTER VOLTAGE (VOLTS) 100 Figure 5. Active-Region Safe Operating Area http://onsemi.com 3 2N5883, 2N5884 (PNP) 2N5885, 2N5886 (NPN) 3000 2N5883, 2N5884 (PNP) 2N5885, 2N5886 (NPN) 3.0 ts 2.0 t, TIME (s) TJ = 25C VCC = 30 V IC/IB = 10 IB1 = IB2 TJ = 25C 2000 C, CAPACITANCE (pF) 10 7.0 5.0 ts 1.0 0.7 0.5 tf 0.3 Cob Cib 1000 500 tf 0.2 0.1 0.3 0.5 0.7 Cib 700 2N5883, 2N5884 (PNP) 2N5885, 2N5886 (NPN) 1.0 2.0 3.0 5.0 7.0 10 IC, COLLECTOR CURRENT (AMPERES) 20 300 0.1 30 0.2 0.5 1.0 2.0 5.0 10 20 VR, REVERSE VOLTAGE (VOLTS) PNP DEVICES 2N5883 and 2N5884 VCE = 4.0 V hFE , DC CURRENT GAIN hFE , DC CURRENT GAIN 1000 700 500 300 25C -55 C 100 70 50 30 VCE = 4.0 V TJ = 150C 300 200 100 70 50 25C 30 -55 C 20 20 10 0.3 0.5 0.7 1.0 2.0 3.0 5.0 7.0 10 IC, COLLECTOR CURRENT (AMPERES) 10 0.3 20 30 0.5 0.7 2.0 TJ = 25C 1.6 IC = 2.0 A 5.0 A 10 A 20 A 1.2 0.8 0.4 0 0.01 0.02 0.05 0.1 0.5 0.2 1.0 IB, BASE CURRENT (AMPERES) 1.0 2.0 3.0 5.0 7.0 10 IC, COLLECTOR CURRENT (AMPERES) 20 30 Figure 9. DC Current Gain VCE , COLLECTOR-EMITTER VOLTAGE (VOLTS) Figure 8. DC Current Gain VCE , COLLECTOR-EMITTER VOLTAGE (VOLTS) 100 NPN DEVICES 2N5885 and 2N5886 TJ = 150C 200 50 Figure 7. Capacitance Figure 6. Turn-Off Time 1000 700 500 Cob 2.0 5.0 10 2.0 TJ = 25C 1.6 1.2 IC = 2.0 A 5.0 A 10 A 20 A 0.8 0.4 0 0.01 0.02 0.05 0.1 0.2 0.5 1.0 2.0 5.0 IB, COLLECTOR CURRENT (AMPERES) Figure 10. Collector Saturation Region Figure 11. Collector Saturation Region http://onsemi.com 4 10 2N5883, 2N5884 (PNP) 2N5885, 2N5886 (NPN) 2.0 2.0 TJ = 25C TJ = 25C 1.6 V, VOLTAGE (VOLTS) V, VOLTAGE (VOLTS) 1.6 1.2 VBE(sat) @ IC/IB = 10 0.8 VBE @ VCE = 4 V 0.4 1.2 VBE(sat) @ IC/IB = 10 0.8 VBE @ VCE = 4 V 0.4 VCE(sat) @ IC/IB = 10 0 0.3 0.5 0.7 1.0 2.0 3.0 VCE(sat) @ IC/IB = 10 5.0 7.0 10 20 0 30 0.3 IC, COLLECTOR CURRENT (AMPERES) 0.5 0.7 1.0 2.0 3.0 5.0 7.0 10 IC, COLLECTOR CURRENT (AMPERES) Figure 12. "On" Voltages Figure 13. "On" Voltages ORDERING INFORMATION Device 2N5883 2N5883G 2N5884 2N5884G Package Shipping TO-204 TO-204 (Pb-Free) TO-204 TO-204 (Pb-Free) 100 Units / Tray 2N5885 2N5885G 2N5886 2N5886G TO-204 TO-204 (Pb-Free) TO-204 TO-204 (Pb-Free) http://onsemi.com 5 20 30 2N5883, 2N5884 (PNP) 2N5885, 2N5886 (NPN) PACKAGE DIMENSIONS TO-204 (TO-3) CASE 1-07 ISSUE Z A N C -T- E D SEATING PLANE K 2 PL 0.13 (0.005) U T Q M M Y M -Y- L V NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. 3. ALL RULES AND NOTES ASSOCIATED WITH REFERENCED TO-204AA OUTLINE SHALL APPLY. 2 H G B M T Y 1 -Q- 0.13 (0.005) DIM A B C D E G H K L N Q U V INCHES MIN MAX 1.550 REF --- 1.050 0.250 0.335 0.038 0.043 0.055 0.070 0.430 BSC 0.215 BSC 0.440 0.480 0.665 BSC --- 0.830 0.151 0.165 1.187 BSC 0.131 0.188 MILLIMETERS MIN MAX 39.37 REF --- 26.67 6.35 8.51 0.97 1.09 1.40 1.77 10.92 BSC 5.46 BSC 11.18 12.19 16.89 BSC --- 21.08 3.84 4.19 30.15 BSC 3.33 4.77 STYLE 1: PIN 1. BASE 2. EMITTER CASE: COLLECTOR M ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. "Typical" parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including "Typicals" must be validated for each customer application by customer's technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION LITERATURE FULFILLMENT: N. American Technical Support: 800-282-9855 Toll Free Literature Distribution Center for ON Semiconductor USA/Canada P.O. Box 61312, Phoenix, Arizona 85082-1312 USA Phone: 480-829-7710 or 800-344-3860 Toll Free USA/Canada Japan: ON Semiconductor, Japan Customer Focus Center 2-9-1 Kamimeguro, Meguro-ku, Tokyo, Japan 153-0051 Fax: 480-829-7709 or 800-344-3867 Toll Free USA/Canada Phone: 81-3-5773-3850 Email: orderlit@onsemi.com http://onsemi.com 6 ON Semiconductor Website: http://onsemi.com Order Literature: http://www.onsemi.com/litorder For additional information, please contact your local Sales Representative. 2N5883/D