AC Film Capacitors B 32335
Motor run
Issue No. 2
07/01
Page 1 of 7
Construction
Dielectric: polypropylene film
Aluminum can
Soft polyurethane resin
Features
Self-healing properties
Low dissipation factor
Overpressure disconnector
High insulation resistance
Typical applications
For general sine wave applications,
mainly as motor run capacitor for room air conditioner units
Terminals
Double fast on 6,3 x 0,8 mm and Quadruple fast on 6,3 x 0,8 mm
Mounting parts
Metal stud (max. torque = 5 Nm)
Technical data and specifications
Standard IEC / EN 60252
Rated capacitance CN15+2 ... 50+8µF
Tolerance ± 5%, ± 6%, ±10%
Rated voltage UN380 ... 440 Vac
Rated frequency fN50...60 Hz
Life expectance 30.000 h (class A)
Maximum ratings
Maximum permissible voltage Umax 1,1 x UN(Un = Rated voltage)
Maximum permissible current Imax 1,3 x IN(In = Rated current)
Test data
AC test voltage terminal to terminal UTT 2 x UN, 60s.
Insulation voltage terminals to case 2000 Vac, 60s.
Insulation resistance Ris or time constant at τ 20 °C 3000 s
Rel. Humidity ≤ 65 °C (minimum value)
Dissipation factor tanδ at 20 °C ≤ 1,0 x10-3 (120 Hz)
Maximum rate of voltage rises du/dtmax 10 V/µs
Fan Herm
Mains
AC Film Capacitors B 32335
Motor run
Issue No. 2
07/01
Page 2 of 7
Technical data (cont`d)
Climatic data
Climatic category 25/085/21 according to IEC 60068-1
Lower category Tmin -25 °C
Upper category Tmax +85 °C
Damp heat test ttest 21 days
Permitted capacitance ∆C/C ≤ 3 %
Approved marks
UL810
10000 AFC
Notes :
1) It should be noted that presence of harmonics produces over voltage & over current on capacitors.
Resonance may cause serious damage to installation if a significant level of total harmonic distortion level
exists for voltage or current. In such cases, series reactors must be considered.
2) Operating temperature class: in accordance with the reference standards, these temperatures are those
measured on the surface on the capacitor.
AC Film Capacitors B 32335
Motor run
Issue No. 2
07/01
Page 3 of 7
Dimensional drawings ( from EIPL)
C - Common – 4 tabs
)
F-Fan – 2 tabs
H-Compressor – 2 tabs
()
B32335-
A
.... 070 B32335-
A
.... 050
Before disconnection
device operation
A
fter disconnection
device operation
AC Film Capacitors B 32335
Motor run
Issue No. 2
07/01
Page 4 of 7
Dimensional drawings ( From Icotron)
B32335-B... 070 B32335-B... 050
Máx. 12mm
Before disconnection
device operation
A
fter disconnection
device operation
AC Film Capacitors B 32335
Motor run
Issue No. 2
07/01
Page 5 of 7
Ordering codes and packing units
UN
Vac
CN
µF
Max. dimensions
d x l (mm)
Ordering code
B32335-* Packing units
380 15+2 53 x 68 3020-+0** 32
15+2.5 53 x 68 3076-+0** 32
15+3 53 x 68 3021-+0** 32
15+4 53 x 68 3022-+0** 32
15+5 53 x 68 3023-+0** 32
17.5+2.5 53 x 68 3077-+0** 32
17.5+4 53 x 68 3024-+0** 32
17.5+5 53 x 68 3025-+0** 32
20+2 53 x 68 3027-+0** 32
20+2.5 53 x 68 3057-+0** 32
20+3 53 x 68 3028-+0** 32
20+4 53 x 68 3050-+0** 32
20+5 53 x 68 3029-+0** 32
22+5 53 x 80 3030-+0** 32
25+2 63.5 x 68 3031-+0** 28
25+2.5 53 x 80 3054-+0** 32
25+3 53 x 80 3032-+0** 32
25+4 53 x 80 3033-+0** 32
25+5 53 x 80 3034-+0** 32
25+7.5 53 x 80 3019-+0** 32
25+8 53 x 80 3051-+0** 32
25+9.5 53 x 80 3053-+0** 32
25+10 53 x 85 3056-+0** 32
25+15 53 x 105 3098-+0** 32
30+2 53 x 80 3035-+0** 32
30+3 53 x 80 3073-+0** 32
30+4 53 x 80 3036-+0** 32
30+5 53 x 80 3037-+0** 32
30+7.5 53 x 85 3066-+0** 32
30+10 53 x 85 3038-+0** 32
AC Film Capacitors B 32335
Motor run
Issue No. 2
07/01
Page 6 of 7
UN
[Vac]
CN
[µF]
Max. dimensions
d x l [mm]
Ordering code
B32335-*Packing units
380 30+12 53 x 105 3072-+0** 32
30+15 53 x 105 3067-+0** 32
35+2 63.5 x 68 3081-+0** 28
35+3 53 x 80 3059-+0** 32
35+4 53 x 105 3039-+0** 32
35+5 53 x 105 3040-+0** 32
35+6 53 x 105 3085-+0** 32
35+8 53 x 105 3058-+0** 32
35+9.5 53 x 105 3052-+0** 32
35+10 53 x 105 3041-+0** 32
35+12 53 x 105 3079-+0** 32
35+15 53 x 105 3074-+0** 32
40+4 53 x 105 3090-+0** 32
40+5 53 x 105 3042-+0** 32
40+7.5 53 x 105 3086-+0** 32
40+8 53 x 105 3047-+0** 32
40+10 53 x 105 3043-+0** 32
40+12 53 x 105 3075-+0** 32
40+15 53 x 105 3078-+0** 32
45+4 63 x 80 3106-+0** 28
45+5 53 x 105 3044-+0** 32
45+8 53 x 105 3071-+0** 32
45+10 53 x 105 3045-+0** 32
50+4 63.5 x 86 3046-+0** 28
50+5 53 x 105 3048-+0** 32
50+8 53 x 105 3049-+0** 32
AC Film Capacitors B 32335
Motor run
Issue No. 2
07/01
Page 7 of 7
UN
[Vac]
CN
[µF]
Max. dimensions
d x l [mm]
Ordering code
B32335-*Packing units
440 15+2 53 x 68 5020-+0** 32
15+5 53 x 80 5023-+0** 32
17,5+3 53 x 80 5130-+0** 32
20+1,5 53 x 80 5108-+0** 32
20+2 53 x 80 5027-+0** 32
20+3 53 x 80 5028-+0** 32
20+4 53 x 80 5050-+0** 32
20+5 53 x 80 5029-+0** 32
22+5 53 x 80 5030-+0** 32
25+1,5 53 x 80 5109-+0** 32
25+2.5 53 x 80 5054-+0** 32
25+4 53 x 105 5033-+0** 32
25+5 53 x 105 5034-+0** 32
25+8 53 x 105 5051-+0** 32
30+3 53 x 105 5073-+0** 32
30+4 53 x 105 5036-+0** 32
30+5 53 x 105 5037-+0** 32
30+8 53 x 105 5080-+0** 32
30+12 53 x 105 5072-+0** 32
30+15 63.5 x 105 5067-+0** 28
35+5 53 x 105 5040-+0** 32
40+3 53 x 105 5091-+0** 32
40+4 53 x 105 5090-+0** 32
40+10 63.5 x 105 5043-+0** 28
Notes for ordering code:
1. Replace
* for the version, A (Epcos India design) or B (Icotron design), according to the drawings on pages 3 and 4
2. Replace + for capacitance tolerance: - J- ±5%, E- ±6%, K- ±10%
3. Replace
** for can
50 - Aluminum can
70 - Aluminum can with stud
M 8 fixing threaded bolt for ≤ φ 53mm.
M12 fixing threaded bolt for φ 63.5mm.
EPCOS AG 2000. All Rights Reserved. Reproduction, publication and dissemination of this data sheet, enclosures hereto
and the information contained therein without EPCOS' prior express consent is prohibited.
The information contained in this data sheet describes the type of component and shall not be considered as guaranteed
characteristics. Purchase orders are subject to the General Conditions for the Supply of Products and Services of the
Electrical and Electronics Industry recommended by the ZVEI (German Electrical and Electronic Manufacturers'
Association), unless otherwise agreed.
