0322 0322-1 Kupplung nach IEC 61076-2-106, IP 68, mit Schraubverschluss und Lotanschlussen, 360 geschirmt 0322-1: erfullt zusatzlich die AISG-Spezifikation 1. Temperaturbereich -40 C/+85 C 2. Werkstoffe Kontakttrager Kontaktbuchse 3- bis 8-polig Kontaktbuchse 12-bis 14-polig Gehause Randelmutter Dichtung PA GF CuZn, versilbert und flashvergoldet CuZn, unternickelt und vergoldet CuZn, vernickelt CuZn, vernickelt NBR 3. Mechanische Daten Steckkraft/Kontakt 3- bis 8-polig1 Steckkraft/Kontakt 12-bis 14-polig2 Ziehkraft/Kontakt 3- bis 8-polig1 Ziehkraft/Kontakt 12-bis 14-polig2 Kontaktierung mit Schutzart3 Weiteres siehe Tabelle < 5,0 N < 5,0 N > 1,2 N > 0,9 N Steckern 031..., 0331, 0332..., 0365 Steckern nach IEC 61076-2-106 und IEC 60130-9 IP 68 4. Elektrische Daten 5 m siehe Diagramm auf Seite 3.64 Durchgangswiderstand Schirmdampfung Weiteres siehe Tabelle 1 2 3 4 gemessen mit einem polierten Stahlstift, Nennma 1,5 mm gemessen mit einem polierten Stahlstift, Nennma 1,0 mm nach DIN EN 60529, nur in verschraubtem Zustand mit einem dazugehorigen Gegenstuck, IP-X8-Anforderungen in Absprache zwischen Anwender und Hersteller nach VDE 0110/IEC 60664 Stecker plug connecteur male 0332 O-Ring O Ring anneau torique Kupplung socket connecteur femelle 0322 *a Dichtung gasket joint d'etancheite *c Schirmung shielding blindage Montageschlussel wrench cle de montage 0380 Polbilder, von der Lotseite gesehen Pin configurations, solder side view Schemas de raccordement, vus du cote a souder 0322 03 0322 04 0322 05 www.lumberg.com 0322 05-1 0322 06 0322 07 0322 07-1 0322 08 0322 08-1 0322 12 0322-1 08-1 0322 14 11/2012 Rundsteckverbinder mit Schraubverschluss nach IEC 61076-2-106 und AISG-Spezifikation, IP 68 Circular connectors with threaded joint acc. to IEC 61076-2-106 and AISG specification, IP 68 Connecteurs circulaires avec verrouillage a vis suivant CEI 61076-2-106 et specification AISG, IP 68 0322 0322 0322-1 0322-1 Socket acc. to IEC 61076-2-106, IP 68, with threaded joint and solder terminals, 360 shielded 0322-1: also complies with AISG specification Connecteur femelle suivant CEI 61076-2-106, IP 68, avec verrouillage a vis et connexion par soudure, blinde a 360 0322-1: aussi conforme a la specification AISG 1. Temperature range 1. Temperature d'utilisation -40 C/+85 C 2. Materials -40 C/+85 C 2. Materiaux Insulating body Contact bush 3 to 8 poles Contact bush 12 to 14 poles Housing Knurled nut Gasket PA GF CuZn, silvered and flash gilded CuZn, pre-nickeled and gilded CuZn, nickeled CuZn, nickeled NBR 3. Mechanical data Corps isolant Prise de contact 3 a 8 poles Prise de contact 12 a 14 poles Boitier Ecrou molete Joint d'etancheite PA GF CuZn, argente et dore flash CuZn, sous-nickele et dore CuZn, nickele CuZn, nickele NBR 3. Caracteristiques mecaniques Insertion force/contact 3-8 poles1 Insertion force/contact 12-14 poles2 Withdrawal force/contact 3-8 poles1 Withdrawal force/cont. 12-14 poles2 Mating with Protection3 For further information see table Force d'insertion/contact 3-8 poles1 Force d'insertion/cont. 12-14 poles2 Force de separation/con. 3-8 poles1 Force de separation/cont. 12-14 poles2 Raccordement avec < 5.0 N < 5.0 N > 1.2 N > 0.9 N plugs 031..., 0331, 0332..., 0365 plugs according to IEC 61076-2-106 and IEC 60130-9 IP 68 Protection3 Pour plus de details, voir tableau < 5,0 N < 5,0 N > 1,2 N > 0,9 N connecteurs males 031..., 0331, 0332..., 0365 connecteurs males suivant CEI 61076-2-106 et CEI 60130-9 IP 68 4. Electrical data Contact resistance Attenuation For further information see table 4 4. Caracteristiques electriques measured with a polished steel pin, nominal thickness 1.5 mm measured with a polished steel pin, nominal thickness 1.0 mm according to DIN EN 60529, only in locked position with a proper counter part, IP X8 requirements under agreement between user and manufacturer according to VDE 0110/IEC 60664 Bestellbezeichnung Designation Designation 0322 03 0322 04 0322 05 0322 05-1 0322 06 0322 07 0322 07-1 0322 08 0322 08-1 0322 12 0322 14 0322-1 08-1 3 4 5 5 6 7 7 8 8 12 14 8 50 50 50 50 50 50 50 50 50 50 50 50 Resistance de contact Attenuation Pour plus de details, voir tableau 1 2 3 4 5 m voir graphique a la page 3.64 mesuree avec une tige d'acier poli, epaisseur nominale 1,5 mm mesuree avec une tige d'acier poli, epaisseur nominale 1,0 mm suivant DIN EN 60529, uniquement a l'etat verrouille avec un propre pendant, exigences IP X8 apres entente entre utilisateur et fabricant suivant VDE 0110/CEI 60664 Ans ch Wir lussque e se rsch ct nitt Sec tion ion de racc . de fil Kab eldu rchm Cab le es Dia diame ser met t re d er e ca ble Bem essu ngs Rat stro ed Cou curren m t ran t as sign e Bem essu ngs Rat spa ed Ten voltag 2 nnung 2 sion e assi gne 2 e Pru fspa nnu Test ng vo Ten ltage sion d'es sai Isol ati Insu onswid er lat Res ion re stand ista s nce istanc e d'is olem Kon ent tak t Con k tact apazit Cap at a capa con cite de citanc tact e 3 Ver pac ku Pac kag ngsein hei eu Uni te d nit (PU t (VE) 'em ) ball age (UE ) 2 Polz ah Pole l s Pole s 1 5 m see graph on page 3.64 mm2 mm 0,75 0,75 0,75 0,75 0,75 0,75 0,75 0,75 0,75 0,25 0,25 0,75 4-8 4-8 4-8 4-8 4-8 4-8 4-8 4-8 4-8 4-8 4-8 4-8 A 5 5 5 5 5 5 5 5 5 3 3 5 V AC kV AC eff. 250 250 60 250 250 250 60 60 60 60 60 60 2 2 1 2 2 2 1 1 1 1 1 1 G > > > > > > > > > > > > 10 10 10 10 10 10 10 10 10 10 10 10 pF ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ 2 2 3 2 2 2 3 3 3 3 3 3 Verpackung: Einzelteilesatze in Kunststoffbeuteln, im Karton Packaging: sets of individual parts in plastic bags, in a cardboard box Emballage: kits de pieces detachees dans sachets en plastique, dans un carton www.lumberg.com 11/2012 Rundsteckverbinder mit Schraubverschluss nach IEC 61076-2-106, IP 68 Circular connectors with threaded joint acc. to IEC 61076-2-106, IP 68 Connecteurs circulaires avec verrouillage a vis suivant CEI 61076-2-106, IP 68 Elektromagnetische Vertraglichkeit (EMV) Electromagnetic compatibility (EMC) Compatibilite electromagnetique Schirmdampfung nach VG 95214-12 (Triaxialmethode KS 12 B) 120 110 Schirmdampfung Attenuation Attenuation (dB) Steckverbinder-Kombinationen connector combinations combinaisons des connecteurs 0322, 0322-1, 0360, 0332, 0332-1, 0365 100 90 80 70 Attenuation acc. to VG 95214-12 (triaxial method KS 12 B) 60 0 Attenuation suivant VG 95214-12 200 400 600 Frequenz * Frequency * Frequence (MHz) (methode triaxiale KS 12 B) www.lumberg.com 11/2012