Technical Data September 2014 3MTM Polyimide Film Tape 5413 Product Description 3MTM Polyimide Film Tape 5413 with DuPontTM Kapton(R) polyimide film and silicone adhesive used for PCB solder masking and other high temperature applications. This product is amber colored and 2.7 mil (69 microns) thick. Features and Benefits * T he DuPontTM Kapton(R) polyimide film does not soften at elevated temperatures, thus the film provides an excellent release surface at elevated temperatures * Is dimensionally stable at high temperatures, which helps reduce rework, helping to enable high productivity * Is flame retardant, chemical and radiation resistant which helps protect surfaces to help reduce replacement costs * T he silicone adhesive's high temperature performance helps reduce adhesive transfer which helps to eliminate cleaning, enabling high productivity * P olyethylene tape core instead of cardboard Product Construction 3MTM Polyimide Film Tape 5413 Backing DupontTM Kapton(R) Polyimide Film Adhesive Silicone Color Amber Standard Roll Length 33 m (36 yd) Application Ideas * Mask for protection of gold fingers of printed circuit boards during wave solder or solder dip process. * Release surface in fabrication of parts cured at elevated temperatures. 3MTM Polyimide Film Tape 5413 Typical Physical Properties Note: The following technical information and data should be considered representative or typical only, and should not be used for specification purposes. 3MTM Polyimide Film Tape 5413 Property Value ASTM Test Method Adhesion to Steel: 22 oz/in width (24 N/100 mm) D-3330 Tensile Strength at Break: 33 lb/in width (578 N/100 mm) D-3579 Elongation at Break: 62% D-3579 Backing Thickness: 1.0 mil (0.03 mm) D-3652 Total Tape Thickness: 2.7 mil (0.07 mm) D-3652 Temperature Use Range: -73 to 260C (-100 to 500F) Dielectric Strength: 7000 volts Outgassing: %TLM = 1.50; %CVCM = 0.50 -- D-149 -- Flame Retardancy: Pass per UL-510 product category: OANZ2 File E230409 Key Attributes Features Advantages Benefits Thin DuPontTM Kapton(R) polyimide film Dimensionally stable at high temperatures No rework - high productivity Flame retardant, chemical and radiation resistant Helps protect surfaces, helping reduce replacement costs Silicone adhesive High temperature performance helps reduce adhesive transfer Virtually no cleaning required - helps increase productivity High adhesive to Helps reduce adhesive transfer film bond Virtually no cleaning required - helps increase productivity Storage and Shelf Life The shelf life of 3MTM Polyimide Film Tape 5413 is 36 months from the date of manufacture when stored in original cartons at 21C (70F) and 50% relative humidity. (2) 3MTM Polyimide Film Tape 5413 Regulatory For regulatory information about this product, contact your 3M representative. Technical Information The technical information, recommendations and other statements contained in this document are based upon tests or experience that 3M believes are reliable, but the accuracy or completeness of such information is not guaranteed. Product Use Many factors beyond 3M's control and uniquely within user's knowledge and control can affect the use and performance of a 3M product in a particular application. Given the variety of factors that can affect the use and performance of a 3M product, user is solely responsible for evaluating the 3M product and determining whether it is fit for a particular purpose and suitable for user's method of application. Warranty, Limited Remedy, and Disclaimer Unless an additional warranty is specifically stated on the applicable 3M product packaging or product literature, 3M warrants that each 3M product meets the applicable 3M product specification at the time 3M ships the product. 3M MAKES NO OTHER WARRANTIES OR CONDITIONS, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OR CONDITION OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OR ANY IMPLIED WARRANTY OR CONDITION ARISING OUT OF A COURSE OF DEALING, CUSTOM OR USAGE OF TRADE. If the 3M product does not conform to this warranty, then the sole and exclusive remedy is, at 3M's option, replacement of the 3M product or refund of the purchase price. Limitation of Liability Except where prohibited by law, 3M will not be liable for any loss or damage arising from the 3M product, whether direct, indirect, special, incidental or consequential, regardless of the legal theory asserted, including warranty, contract, negligence or strict liability. Electronics Materials Solutions Division 3M Center, Building 225-3S-06 St. Paul, MN 55144-1000 1-800-251-8634 phone 651-778-4244 fax www.3M.com/electronics DuPontTM and Kapton(R) are trademarks of E. I. du Pont de Nemours and Company or its affiliates. 3M is a trademark of 3M Company. Please recycle. (c) 3M 2014. All rights reserved. 70-0703-2532-2 (3)