Surface Mount PIN Diode Limiter LM200802-M-A-300 Series Datasheet Features * Surface Mount Limiter in Compact Outline: 8mm L x 5mm W x 2.5 mm H * Incorporates Anti-Parallel Limiter Diodes * Broadband Performance (20 MHz - 8 GHz) * Higher Average Power Handling than Plastic (44 dBm Avg Power) * Lower Insertion Loss (0.7 dB) & Lower Flat Leakage Power (20 dBm) * RoHS Compliant Description The LM200802-M-A-300 Series of Surface Mount Silicon PIN Diode Limiters is manufactured using Aeroflex / Metelics proven hybrid manufacturing process incorporating Silicon NIP and PIN Diodes integrated within a ceramic substrate. This low profile, compact, surface mount component, (8mm L x 5mm W x 2.5 mm H ) offers superior low and high signal performance to comparable MMIC devices in QFN packages. The Limiter Modules are designed to optimize small signal insertion loss, (N.F.) and high signal flat leakage performance in a compact, surface mount package. The design incorporates a NIP Diode with an Anti-Parallel PIN Diode to provide broadband microwave performance from 20 MHz - 8 GHz. Using NIP and PIN Limiter Diodes with lower thermal resistance, (< 55 C/W), RF C.W. incident power levels of +44 dBm and RF peak incident power levels of +50 dBm @ 1 S RF pulse width, 0.001 duty cycle are very achievable in broadband limiter applications. The lower PIN and NIP Diode series resistance, (< 1.5 ), coupled with the smaller minority carrier lifetime, (< 300 S), provides lower flat leakage power (< +20 dBm) and lower spike leakage energy (< 0.1 Ergs) for superior LNA protection. Applications The LM200802-M-A-300 Limiter Series is ideal for 20 MHz to 8 GHz wideband applications, requiring high volume, surface mount, solder re-flow manufacturing. These products are durable, reliable, and capable of meeting all military, commercial, and industrial environments. The devices are fully RoHS compliant and are available in tube or tape-reel. Environmental Capabilities The LM200802-M-A-300 Limiters are capable of meeting the environmental requirements of MIL-STD750 and MIL-STD-202. ESD and Moisture Sensitivity Level Rating PIN Diode Limiters are susceptible to ESD conditions as with all semiconductors. The ESD rating for this device is Class 0, HBM. The moisture sensitivity level rating for this device is MSL 2. Document No. DS13698, Rev. B, ECN 9816 Revision Date: 6/16/2011 PIN Diode Limiter LM200802-M-A-300 Electrical Specifications @ Zo = 50 , TA=+ 25 C (Unless Otherwise Defined) Parameter Symbol Units Test Conditions Minimum Value Typical Value Maximum Value Frequency F MHz Swept Frequency 10 20 - 8000 8500 Insertion Loss IL dB Swept Frequency | -1.4 | | -1.6 | Po = 0 dBm Return Loss RL dB Swept Frequency | -13 | | -15 | Po = 0 dBm Input Compression Power 2nd Harmonic P1dB dBm Swept Frequency +6 +8 2Fo dBc Po = 0 dBm 40 50 +10 Fo = 2 GHz Peak Incident Power Pinc(Pk) dBm RF Pulse Width = +50 +51 Swept Frequency +43 +44 +50 dBm, +20 +23 0.2 0.3 500 800 1 S, 0.001 duty C.W. Incident Power Pinc(CW) dBm Flat Leakage Power Pf dBm RF Pulse Width = 1 S, 0.001 duty Spike Leakage Energy Es Ergs +50 dBm, RF Pulse Width = 1 S, 0.001 duty Recovery Time r S ( 50% Trailing RF Pulse - 1dB IL ) +50 dBm, RF Pulse Width = 1 S, 0.001 duty Absolute Maximum Ratings @ TA = + 25 C ( Unless Otherwise Defined ) Parameter 2 Absolute Maximum Value Operating Temperature -65 C to +125 C Storage Temperature -65 C to +150 C Junction Temperature +175 C RF C.W. Incident Power @ + 85 C Source & Load VSWR < 1.2:1 +42 dBm RF Peak. Incident Power @ + 85 C Source & Load VSWR < 1.2:1 + 50 dBm, RF Pulse Width = 1S, 0.001 duty cycle Insertion Loss Rate of Change with Operating Temperature | - 0.005 dB / C | jc, C.W. Thermal Resistance ( Junction to Case ) 55 C/W Assembly Temperature +260 C for 10 Seconds 603-641-3800 * 888-641--SEMI (7364) * metelics-sales@aeroflex.com * www.aeroflex.com/metelics Document No. DS13698, Rev. B, ECN 9816 Revision Date: 6/16/2011 PIN Diode Limiter LM200802-M-A-300 Limiter Schematic Zo = 50 RF Input RF Output Assembly Instructions The LM200802-M-A-300 Limiters are capable of being placed onto circuit boards with pick and place manufacturing equipment from tube or tape-reel dispensing. The devices are attached to the circuit board using conventional solder re-flow or wave soldering procedures with RoHS type or Sn 63 / Pb 37 type solders per Table I and Graph I Time-Temperature recommended profile. Table 1: Time-Temperature Profile for Sn 60/Pb40 or RoHS Type Solders Profile Feature Average ramp-up rate (TL to TP) Preheat - Temperature Minimum (TSMIN) - Temperature Maximum (TSMAX) - Time (Minimum to maximum) (ts) Sn-Pb Eutectic Assembly Pb-Free Assembly 3C/second maximum 3C/second maximum 100C 150C 150C 200C 60-120 seconds 60-180 seconds TSMAX to TL - Ramp-up Rate Time Maintauined above: - Temperature (TL) 3C/second maximum 183C 217C 60-150 seconds 60-150 seconds Peak Temperature (TP) 225 +0 / -5C 245 +0/-5C Time within 5C of actual Peak Temperature (TP) 10-30 seconds 20-40 seconds Ramp-down Rate 6C/second maximum 6C/second maximum Time 25C to Peak Temperature 6 minutes maximum 8 minutes maximum - Time (tL) 603-641-3800 * 888-641--SEMI (7364) * metelics-sales@aeroflex.com * www.aeroflex.com/metelics Document No. DS13698, Rev. B, ECN 9816 Revision Date: 6/16/2011 3 PIN Diode Limiter Graph1: Solder Re-Flow Time-Temperature Function 4 603-641-3800 * 888-641--SEMI (7364) * metelics-sales@aeroflex.com * www.aeroflex.com/metelics Document No. DS13698, Rev. B, ECN 9816 Revision Date: 6/16/2011 PIN Diode Limiter LM200802-M-A-300 Typical RF Small Signal Performance @ +25 C LM200802-M-A-300 Insertion Loss Vs. Frequency 0 Insertion Loss -0.2 -0.4 Insertion Loss (dB) -0.6 -0.8 -1 -1.2 -1.4 -1.6 -1.8 -2 0 1000 2000 3000 4000 5000 6000 7000 8000 Frequency (MHz) LM200802-M-A-300 Return Loss vs. Frequency 0 -5 -10 Return Loss (dB) -15 -20 -25 -30 -35 -40 Return Loss -45 0 1000 2000 3000 4000 5000 6000 7000 8000 Frequency (MHz) 603-641-3800 * 888-641--SEMI (7364) * metelics-sales@aeroflex.com * www.aeroflex.com/metelics Document No. DS13698, Rev. B, ECN 9816 Revision Date: 6/16/2011 5 PIN Diode Limiter LM200802-M-A-300 High Signal Parametric Data LM200802-M-A-300 Pout vs Pin Function (Continuous Wave) 20 F= 2.5 GHz 18 16 0 dB Pout ( dBm ) 14 12 10 10 dB 20 dB 30 dB 8 6 4 2 0 10 15 20 25 30 35 40 45 Pin ( dBm ) 6 603-641-3800 * 888-641--SEMI (7364) * metelics-sales@aeroflex.com * www.aeroflex.com/metelics Document No. DS13698, Rev. B, ECN 9816 Revision Date: 6/16/2011 PIN Diode Limiter LM200802-M-A-300 Outline Drawing, Case Style 300, (CS300) ARX DATE CODE PART NUMBER RF Circuit Solder Footprint for Case Style 300 (CS 300) Thatched Area is RF, D.C., and Thermal Ground.Vias should be solid copper fill and gold plated for optimum heat transfer from backside of limiter module through Circuit Vias to metal thermal ground. 603-641-3800 * 888-641--SEMI (7364) * metelics-sales@aeroflex.com * www.aeroflex.com/metelics Document No. DS13698, Rev. B, ECN 9816 Revision Date: 6/16/2011 7 Part Number Ordering Information: Part Number LM200802-M-A-300-T Description Tube Packaging LM200802-M-A-300-R Tape-Reel Packaging Quantities of 250 or 500 LM200802-M-A-300-W Waffle Packaging LM200802-M-A-300-E RF Evaluation Board Aeroflex / Metelics, Inc. ISO 9001:2008 certified companies 54 Grenier Field Road, Londonderry, NH 03053 Tel: (603) 641-3800 Sales: (888) 641-SEMI (7364) Fax: (603)-641-3500 975 Stewart Drive, Sunnyvale, CA 94085 Tel: (408) 737-8181 Fax: (408) 733-7645 www.aeroflex.com/metelics metelics-sales@aeroflex.com Aeroflex / Metelics, Inc. reserves the right to make changes to any products and services herein at any time without notice. Consult Aeroflex or an authorized sales representative to verify that the information in this data sheet is current before using this product. Aeroflex does not assume any responsibility or liability arising out of the application or use of any product or service described herein, except as expressly agreed to in writing by Aeroflex; nor does the purchase, lease, or use of a product or service from Aeroflex convey a license under any patent rights, copyrights, trademark rights, or any other of the intellectual rights of Aeroflex or of third parties. Copyright 2011 Aeroflex / Metelics. All rights reserved. Document No. DS13698, Rev. B, ECN 9816 Revision Date: 6/16/2011 Our passion for performance is defined by three attributes represented by these three icons: solution-minded, performance-driven and customer-focused.