Not for new design. Use new F611-F612 Series. Loose R82 MKT Series Taped METALLIZED POLYESTER FILM CAPACITOR D.C. MULTIPURPOSE APPLICATIONS Typical applications: by-passing, blocking, coupling, decoupling, timing, oscillator circuits. For inverter applications please refer to RSB Series. B Od 0.05 p = 5mm PRODUCT CODE: R82 All dimensions are in mm. 6 0.5 >6 0.6 Pitch Box thickness (B) (mm) (mm) 5.0 5.0 <4.5 4.5 Maximum dimensions (mm) B max H max L max B +0.1 B +0.1 H +0.1 H +0.1 L +0.2 L +0.3 GENERAL TECHNICAL DAta Dielectric: polyester film (polyethylene terephthalate). The part number, comprising 14 digits, is formed as follows: Plates: aluminium layer deposited by evaporation under 1 2 3 4 5 6 7 8 9 10 11 12 13 14 vacuum. Winding: non-inductive type. R 8 2 C Leads: tinned wire. Protection: plastic case, thermosetting resin filled. Digit 1 to 3 Series code. Box material is solvent resistant and flame Digit 4 d.c. rated voltage: retardant according to UL94. C = 50V D = 63VE= 100V Marking: Capacitance, tolerance, D.C. rated voltage. I =250V M = 400V Climatic category: 55/105/56 IEC 60068-1 Digit 5 Pitch: C = 5 mm Operating temperature range: -55 to +105C Digit 6 to 9 Digits 7 - 8 - 9 indicate the first three digits of Related documents: IEC 60384-2 Capacitance value and the 6th digit indicates the number of zeros that must be added to obtain the Rated Capacitance in pF. Digit 10 to 11 Mechanical version and/or packaging (table1) Digit 12 Identifies the dimensions and electrical characteristics. Digit 13 Internal use Capacitance tolerance: Digit 14 J=5%; K=10%; M=20%. Product code system Table 1 (for more detailed information, please refer to page 14). Standard packaging style Lead length Ordering code (mm) (Digit 10 to 11) AMMO-PACK DQ Reel O 355 mm CK Loose, short leads 4 +1.5 AA Loose, long leads 17 Z3 +1/-2 Winding scheme single sided metallized polyester film Digitally signed by Marcy Brand DN: c=US, st=FL, l=Fort Lauderdale, o=KEMET Corporation, ou=Marketing Communications, cn=Marcy Brand, email=marcybrand@kemet.com Date: 2012.07.18 12:09:19 -04'00' 09/2008 26 Not for new design. Use new F611-F612 Series. R82 MKT Series METALLIZED POLYESTER FILM CAPACITOR D.C. MULTIPURPOSE APPLICATIONS a) STACKED version p = 5 mm PRODUCT CODE: R82 b) WOUND version Rated Cap. 50Vdc/30Vac Std dimensions Max dv/dt Max K0 B H L p (V/s) (V2/s) 11.0 a) 2.2 F 6.0 7.2 5.0 100 10.0 E3 b) 3.3 F 7.2 13.0 7.2 5.0 25 2.5 E3 b) 4.7 F 7.2 13.0 7.2 5.0 25 2.5 E3 Part Number R82CC 4220--7-R82CC 4330--3-R82CC 4470--3-- Mechanical version and packaging (Table1) Internal use Tolerance: J (5%); K (10%); M (20%) STACKED version Rated Cap. 63Vdc/40Vac Std dimensions Max dv/dt Max K0 B H L p 0.10 F 2.5 6.5 7.2 5.0 (V/s) 160 (V2s) 20 E3 0.15 F 2.5 6.5 7.2 5.0 160 20 E3 0.22 F 2.5 6.5 7.2 5.0 160 20 E3 0.33 F 3.5 7.5 7.2 5.0 160 20 E3 0.47 F 3.5 7.5 7.2 5.0 160 20 E3 0.68 F 4.5 9.5 7.2 5.0 160 20 E3 1.0 F 5.0 10.0 7.2 5.0 160 20 E3 1.5 F 6.0 11.0 7.2 5.0 160 20 E3 Rated Cap. 100Vdc/63Vac Std dimensions Max dv/dt Max K0 B H L p (V/s) (V2/s) 1000 pF 2.5 6.5 7.2 5.0 200 40 E3 1500 pF 2.5 6.5 7.2 5.0 200 40 E3 2200 pF 2.5 6.5 7.2 5.0 200 40 E3 3300 pF 2.5 6.5 7.2 5.0 200 40 E3 4700 pF 2.5 6.5 7.2 5.0 200 40 E3 6800 pF 2.5 6.5 7.2 5.0 200 40 E3 0.010 F 2.5 6.5 7.2 5.0 200 40 E3 0.015 F 2.5 6.5 7.2 5.0 200 40 E3 0.022 F 2.5 6.5 7.2 5.0 200 40 E3 0.033 F 2.5 6.5 7.2 5.0 200 40 E3 0.047 F 2.5 6.5 7.2 5.0 200 40 E3 0.068 F 2.5 6.5 7.2 5.0 200 40 E3 0.10 F 2.5 6.5 7.2 5.0 200 40 E3 0.15 F 3.5 7.5 7.2 5.0 200 40 E3 0.22 F 3.5 7.5 7.2 5.0 200 40 E3 0.33 F 4.5 9.5 7.2 5.0 200 40 E3 0.47 F 4.5 9.5 7.2 5.0 200 40 E3 0.68 F 5.0 10.0 7.2 5.0 200 40 E3 1.0 6.0 11.0 7.2 5.0 200 40 E3 F Rated Cap. 250Vdc/140Vac Reduced sizes Std dimensions B H L p 0.022 F 2.5 6.5 7.2 5.0 0.047 F 3.5 7.5 7.2 5.0 Part Number R82DC 3100--5-R82DC 3150--6-R82DC 3220--6-R82DC 3470--6-R82DC 3680--6-R82DC 4100--6-R82DC 4150--6-- R82EC 1150--5-- R82EC 1220--5-R82EC 1330--5-R82EC 1470--5-R82EC 1680--5-R82EC 2100--5-R82EC 2150--5-R82EC 2330--5-R82EC 2470--6-R82EC 2680--6-- 65 E3 R82IC 2470--6-- 130 65 E3 R82IC 2680--6-- 9.5 7.2 5.0 130 65 E3 R82IC 3100--6-- 0.15 F 5.0 10.0 0.22 F 6.0 11.0 7.2 5.0 130 65 E3 R82IC 3150--6-- 7.2 5.0 130 65 E3 R82IC 3220--6-- Max dv/dt (V/s) 250 Max K0 Part Number (V2/s) 125 E3 R82IC 1680--5- 250Vdc/160Vac Std dimensions B H L p 2.5 6.5 7.2 5.0 2.5 6.5 7.2 5.0 250 125 E3 0.015 F 2.5 6.5 7.2 5.0 250 125 E3 0.022 F 3.5 7.5 7.2 5.0 250 125 E3 0.033 F 3.5 7.5 7.2 5.0 250 125 E3 0.047 F 4.5 9.5 7.2 5.0 250 125 E3 0.068 F 4.5 9.5 7.2 5.0 250 125 E3 0.10 F 5.0 10.0 7.2 5.0 250 125 E3 0.15 F 6.0 11.0 7.2 5.0 250 125 E3 R82IC 3150--5-- Max dv/dt Max K0 Part Number 400Vdc/160Vac Reduced sizes Std dimensions B H L p (V/s) (V2s) 5.0 200 160 E3 5.0 200 160 E3 7.2 5.0 200 160 E3 5.0 10.0 7.2 5.0 200 160 E3 6.0 11.0 7.2 5.0 200 160 E3 Max dv/dt (V/s) Max K0 320 E3 2.5 6.5 7.2 0.015 F 3.5 7.5 7.2 0.033 F 4.5 9.5 0.047 F R82EC 3330--7-- 0.068 F R82EC 3680--7-- Rated Cap. R82EC 3150--7-R82EC 3220--7-R82EC 3470--7-R82EC 4100--7-- Mechanical version and packaging (Table1) Internal use Tolerance: J (5%); K (10%); M (20%) All dimensions are in mm. R82IC 2100--5-- 0.010 F 6800 pF R82EC 3100--7-- (V2/s) 65 E3 R82IC 2220--6-- 130 Rated Cap. R82EC 2220--5-- (V/s) 130 5.0 6800 pF R82EC 1100--5-- Part Number 7.2 Rated Cap. Part Number Max K0 7.5 0.068 F 3.5 0.10 F 4.5 R82DC 3330--6-- Max dv/dt 400Vdc/200Vac Std dimensions B H L p R82IC 2150--5-- R82IC 2220--5-R82IC 2330--5-- R82IC 2470--5-R82IC 2680--5-- R82IC 3100--55- R82MC1680--6-R82MC2150--6-- R82MC2330--6-- R82MC2470--6-R82MC2680--6-Part Number (V2s) 1000 pF 2.5 6.5 7.2 5.0 400 1500 pF 2.5 6.5 7.2 5.0 400 320 E3 2200 pF 2.5 6.5 7.2 5.0 400 320 E3 3300 pF 2.5 6.5 7.2 5.0 400 320 E3 4700 pF 2.5 6.5 7.2 5.0 400 320 E3 6800 pF 3.5 7.5 7.2 5.0 400 320 E3 Note: If the working voltage (V) is lower than the rated 0.010 F 3.5 7.5 7.2 5.0 400 320 E3 voltage (VR), the capacitor may work at higher dv/dt. 0.015 F 4.5 9.5 7.2 5.0 400 320 E3 In this case the maximum value allowed is obtained 0.022 F 4.5 9.5 7.2 5.0 400 320 E3 multiplying the above value (see table dv/dt) with the 0.033 F 5.0 10.0 7.2 5.0 400 320 E3 ratio VR /V. 0.047 F 6.0 11.0 7.2 5.0 400 320 E3 The pulse characteristic K0 depends on the voltage wave-form and in any case it cannot overcome the Mechanical version and packaging (Table1) Internal use value given in the above table. R82MC1100--5-R82MC1150--5-- R82MC1220--5-- R82MC1330--5-R82MC1470--5-- R82MC1680--5-- R82MC2100--5-R82MC2150--5-- R82MC2220--5-R82MC2330--5-- R82MC2470--5-- Tolerance: J (5%); K (10%); M (20%) 27 09/2008 Not for new design. Use new F611-F612 Series. R82 MKT Series METALLIZED POLYESTER FILM CAPACITOR D.C. MULTIPURPOSE APPLICATIONS p = 5 mm PRODUCT CODE: R82 test method and performance electrical characteristics Rated voltage (VR): 50 Vdc 250 Vdc Rated temperature (TR): 63 Vdc 400 Vdc 100 Vdc +85 C Temperature derated voltage: for temperatures between +85C and +105C a decreasing factor of 1.25% per degree C on the rated voltage VR (d.c. and a.c.) has to be applied. Capacitance range: 1000pF to 4.7F Capacitance values: E6 series (IEC 60063 Norm). Capacitance tolerances (measured at 1 kHz): 5% (J); 10% (K); 20% (M). Total self-inductance (L): 7nH max 1 nH per 1 mm lead and capacitor length. Dissipation factor (DF): tg 10-4 at +25C 5C kHz C 0.1F 1 10 100 80 120 250 C > 0.1F 80 120 Insulation resistance: Test conditions Temperature: +25C5C Voltage charge time: 1 min Voltage charge: 50 Vdc for VR <100 Vdc 100 Vdc for VR 100 Vdc Performance For VR 100 Vdc 15000 M for C 0.33F 5000 s for C > 0.33F and 1F 1000 s for C > 1F For VR >100 Vdc 30000 M *Typical value Test voltage between terminations: 1.4xVR applied for 2 s at +25C5C. 09/2008 Damp heat, steady state: Test conditions Temperature: Relative humidity (RH): Test duration: Performance Capacitance change |C/C|: DF change (tg): Insulation resistance: +40C2C 93% 2% 56 days 5% 50x10-4 at 1kHz 50% of initial limit. Endurance: Test conditions +105C 2C Temperature: Test duration: 2000 h Voltage applied: 1.25xVC Performance Capacitance change |C/C|: 5% DF change (tg): 30x10-4 at 10kHz for C1F for C>1F 20x10-4 at 1kHz Insulation resistance: 50% of initial limit. Resistance to soldering heat: Test conditions Solder bath temperature: +260C5C Dipping time (with heat screen):10 s 1 s Performance Capacitance change |C/C|: 2% DF change (tg): 30x10-4 at 10kHz for C 1F 20x10-4 at 1kHz for C> 1F Insulation resistance: initial limit. Long term stability (after two years): Storage: standard environmental conditions (see page 12). Performance Capacitance change |C/C|: 3% for C 0.1F 2% for C> 0.1F Reliability: Reference MIL HDB 217 Application conditions: +40C2C Temperature: Voltage: 0.5xVR Failure rate: 1 FIT (1 FIT = 1x10-9 failures/components x h) Failure criteria: (according to DIN 44122) Short or open circuit Capacitance change |C/C|: > 10% DF change (tg): > 2 x initial limit. Insulation resistance: < 0.005 x initial limit. 28 Not for new design. Use new F611-F612 Series. R82 MKT Series METALLIZED POLYESTER FILM CAPACITOR D.C. MULTIPURPOSE APPLICATIONS p = 5 mm PRODUCT CODE: R82 MAX. VOLTAGE (Vr.m.s.) VERSUS FREQUENCY (sinusoidal wave-form / Th 40C) 29 09/2008 Not for new design. Use new F611-F612 Series. R82 MKT Series METALLIZED POLYESTER FILM CAPACITOR D.C. MULTIPURPOSE APPLICATIONS p = 5 mm PRODUCT CODE: R82 MAX. CURRENT (Ir.m.s.) VERSUS FREQUENCY (sinusoidal wave-form / Th 40C) 1 Statements of suitability for certain applications are based on our knowledge of typical operating conditions for such applications, but are not intended to constitute - and we specifically disclaim - any warranty concerning suitability for a specific customer application or use. This Information is intended for use only by customers who have the requisite experience and capability to determine the correct products for their application. Any technical advice inferred from this Information or otherwise provided by us with reference to the use of our products is given gratis, and we assume no obligation or liability for the advice given or results obtained.