IR25600SPBF Dual Low Side Driver Features Product Summary Gate drive supply range from 6V to 20V CMOS Schmitt-triggered inputs Matched propagation delay for both channels Outputs in phase with inputs IO+/- 1.5A / 1.5A VOUT 6V - 20V Ton/off (typ.) 85 & 65 ns Package Options Description The IR25600 is a low voltage, high speed power MOSFET and IGBT driver. Proprietary latch immune CMOS technologies enable ruggedized monolithic construction. Logic inputs are compatible with standard CMOS or LSTTL outputs. The output drivers feature a high pulse current buffer stage designed for minimum driver crossconduction. Propagation delays between two channels are matched. 8 Lead SOIC Ordering Information Standard Pack Base Part Number Package Type Form Quantity IR25600SPBF SO8N Tube 95 IR25600SPBF SO8N Tape and Reel 2500 Orderable Part Number IR25600SPBF IR25600STRPBF Typical Connection Diagram 1 www.irf.com (c) 2012 International Rectifier April 2, 2012 | PD# IR25600SPBF Absolute Maximum Ratings Absolute maximum ratings indicate sustained limits beyond which damage to the device may occur. All voltage parameters are absolute voltages referenced to GND. The thermal resistance and power dissipation ratings are measured under board mounted and still air conditions. Symbol VS VO VIN PD RthJA TJ TS TL Definition Fixed supply voltage Output voltage Min. -0.3 -0.3 Max. 25 Units VS + 0.3 V Logic input voltage -0.3 VS + 0.3 Package power dissipation @ T A +25C -- 0.625 W Thermal resistance, junction to ambient -- 200 C/W Junction temperature Storage temperature Lead temperature (soldering, 10 seconds) -- -55 -- 150 150 300 C Recommended Operating Conditions For proper operation the device should be used within the recommended conditions. All voltage parameters are absolute voltages references to GND. Symbol VS VO VIN TA 2 Definition Fixed supply voltage Output voltage Logic input voltage (IN & SD) Ambient temperature www.irf.com (c) 2012 International Rectifier Min. Max. 6 0 20 0 -40 VS VS 125 Units V C April 2, 2012 | PD# IR25600SPBF Dynamic Electrical Characteristics VBIAS (VS) = 15V, CL = 1000 pF and TA = 25C unless otherwise specified. Symbol Definition Min. Typ. Max. ton Turn-on propagation delay -- 85 160 toff Turn-off propagation delay -- 65 150 Turn-on rise time Turn-off fall time -- -- 15 10 35 25 tr tf Units Test Conditions ns Figure 4 Static Electrical Characteristics VBIAS (VS) = 15V and TA = 25C unless otherwise specified. The VIN and IIN parameters are referenced to GND and are applicable to input leads INA and INB. The VO and IO parameters are referenced to GND and are applicable to the respective output leads: OUTA and OUTB. Symbol VIH VIL VOH VOL IQS IIN+ IINIO+ IO- 3 Definition Logic "1" input voltage (OUTA = HI and OUTB = HI) Logic "0" input voltage (OUTA = LO and OUTB = LO) High level output voltage, VBIAS - VO Low level output voltage, VO Quiescent VS supply current Logic "1" input bias current (OUT = HI) Logic "0" input bias current (OUT = LO) Output high short circuit pulsed current Output low short circuit pulsed current www.irf.com (c) 2012 International Rectifier Min. Typ. Max. Units Test Conditions 2.7 -- -- -- -- 0.8 -- -- -- -- -- 100 1.2 0.1 200 -- 5 15 -- -10 -30 VIN = 0V 1.5 2.3 -- 1.5 3.3 -- VO = 0V, VIN = VS PW 10 s VO = 15V , VIN = 0V PW 10 s V IO = 0A IO = 0A VIN = 0V or VS A A VIN = VS April 2, 2012 | PD# IR25600SPBF Functional Block Diagram 4 www.irf.com (c) 2012 International Rectifier April 2, 2012 | PD# IR25600SPBF Lead Definitions Symbol Description INA INB OUTA OUTB VS GND Logic input gate driver output (OUTA), in phase Logic input gate driver output (OUTB), in phase Gate drive output A Gate drive output B Supply Voltage Ground Lead Assignments 1 NC NC 8 2 INA OUTA 7 3 GND VS 6 4 INB OUTB 5 5 www.irf.com (c) 2012 International Rectifier April 2, 2012 | PD# IR25600SPBF Advance information 6 www.irf.com (c) 2012 International Rectifier April 2, 2012 | PD# IR25600SPBF Package Details 7 www.irf.com (c) 2012 International Rectifier April 2, 2012 | PD# IR25600SPBF Tape and Reel Details (SO8N) LOADED TAPE FEED DIRECTION A B H D F C NOTE : CONTROLLING DIMENSION IN MM E G CARRIER TAPE DIMENSION FOR 8SOICN Metric Imperial Code Min Max Min Max A 7.90 8.10 0.311 0.318 B 3.90 4.10 0.153 0.161 C 11.70 12.30 0.46 0.484 D 5.45 5.55 0.214 0.218 E 6.30 6.50 0.248 0.255 F 5.10 5.30 0.200 0.208 G 1.50 n/a 0.059 n/a H 1.50 1.60 0.059 0.062 F D C B A E G H REEL DIMENSIONS FOR 8SOICN Metric Code Min Max A 329.60 330.25 B 20.95 21.45 C 12.80 13.20 D 1.95 2.45 E 98.00 102.00 F n/a 18.40 G 14.50 17.10 H 12.40 14.40 8 www.irf.com Imperial Min Max 12.976 13.001 0.824 0.844 0.503 0.519 0.767 0.096 3.858 4.015 n/a 0.724 0.570 0.673 0.488 0.566 (c) 2012 International Rectifier April 2, 2012 | PD# IR25600SPBF Part Marking Information IRxxxxx Part number YWW ? Date code Pin 1 Identifier ? XXXX ? MARKING CODE P Lead Free Released Non-Lead Free Released 9 www.irf.com IR logo (c) 2012 International Rectifier Lot Code (Prod mode - 4 digit SPN code) Assembly site code Per SCOP 200-002 April 2, 2012 | PD# IR25600SPBF Qualification Information Industrial (per JEDEC JESD 47E) Comments: This family of ICs has passed JEDEC's Industrial qualification. IR's Consumer qualification level is granted by extension of the higher Industrial level. MSL2 (per IPC/JEDEC J-STD-020C) Yes Qualification Level Moisture Sensitivity Level RoHS Compliant Qualification standards can be found at International Rectifier's web site http://www.irf.com/ Higher qualification ratings may be available should the user have such requirements. Please contact your International Rectifier sales representative for further information. Higher MSL ratings may be available for the specific package types listed here. Please contact your International Rectifier sales representative for further information. The information provided in this document is believed to be accurate and reliable. However, International Rectifier assumes no responsibility for the consequences of the use of this information. International Rectifier assumes no responsibility for any infringement of patents or of other rights of third parties which may result from the use of this information. No license is granted by implication or otherwise under any patent or patent rights of International Rectifier. The specifications mentioned in this document are subject to change without notice. This document supersedes and replaces all information previously supplied. For technical support, please contact IR's Technical Assistance Center http://www.irf.com/technical-info/ WORLD HEADQUARTERS: 233 Kansas St., El Segundo, California 90245 Tel: (310) 252-7105 10 www.irf.com (c) 2012 International Rectifier April 2, 2012 | PD#