IR25600SPBF
1
www.irf.com
© 2012 International Rectifier
April 2, 2012 | PD#
Dual Low Side Driver
Ordering Information
Typical Connection Diagram
Features
Gate drive supply range from 6V to 20V
CMOS Schmitt-triggered inputs
Matched propagation delay for both channels
Outputs in phase with inputs
Description
The IR25600 is a low voltage, high speed power MOSFET
and IGBT driver. Proprietary latch immune CMOS
technologies enable ruggedized monolithic construction.
Logic inputs are compatible with standard CMOS or
LSTTL outputs. The output drivers feature a high pulse
current buffer stage designed for minimum driver cross-
conduction. Propagation delays between two channels are
matched.
Product Summary
1.5A / 1.5A
6V 20V
85 & 65 ns
Package Options
8 Lead SOIC
Base Part Number
Package Type
Standard Pack
Orderable Part Number
Form
Quantity
IR25600SPBF
SO8N
Tube
95
IR25600SPBF
IR25600SPBF
SO8N
Tape and Reel
2500
IR25600STRPBF
IR25600SPBF
2
www.irf.com
© 2012 International Rectifier
April 2, 2012 | PD#
Absolute Maximum Ratings
Absolute maximum ratings indicate sustained limits beyond which damage to the device may occur. All voltage
parameters are absolute voltages referenced to GND. The thermal resistance and power dissipation ratings are
measured under board mounted and still air conditions.
Symbol
Definition
Min.
Max.
Units
VS
Fixed supply voltage
-0.3
25
V
VO
Output voltage
-0.3
VS + 0.3
VIN
Logic input voltage
-0.3
VS + 0.3
PD
Package power dissipation @ TA ≤ +25°C
0.625
W
RthJA
Thermal resistance, junction to ambient
200
°C/W
TJ
Junction temperature
150
°C
TS
Storage temperature
-55
150
TL
Lead temperature (soldering, 10 seconds)
300
Recommended Operating Conditions
For proper operation the device should be used within the recommended conditions. All voltage parameters are
absolute voltages references to GND.
Symbol
Definition
Min.
Max.
Units
VS
Fixed supply voltage
6
20
V
VO
Output voltage
0
VS
VIN
Logic input voltage (IN & SD)
0
VS
TA
Ambient temperature
-40
125
°C
IR25600SPBF
3
www.irf.com
© 2012 International Rectifier
April 2, 2012 | PD#
Dynamic Electrical Characteristics
VBIAS (VS) = 15V, CL = 1000 pF and TA = 25°C unless otherwise specified.
Symbol
Definition
Min.
Typ.
Max.
Units
Test Conditions
ton
Turn-on propagation delay
85
160
ns
Figure 4
toff
Turn-off propagation delay
65
150
tr
Turn-on rise time
15
35
tf
Turn-off fall time
10
25
Static Electrical Characteristics
VBIAS (VS) = 15V and TA = 25°C unless otherwise specified. The VIN and IIN parameters are referenced to GND
and are applicable to input leads INA and INB. The VO and IO parameters are referenced to GND and are
applicable to the respective output leads: OUTA and OUTB.
Symbol
Definition
Min.
Typ.
Max.
Units
Test Conditions
VIH
Logic “1” input voltage (OUTA = HI
and OUTB = HI)
2.7
V
VIL
Logic “0input voltage (OUTA = LO
and OUTB = LO)
0.8
VOH
High level output voltage, VBIAS - VO
1.2
IO = 0A
VOL
Low level output voltage, VO
0.1
IO = 0A
IQS
Quiescent VS supply current
100
200
μA
VIN = 0V or VS
IIN+
Logic “1” input bias current (OUT =
HI)
5
15
VIN = VS
IIN-
Logic “0” input bias current (OUT =
LO)
-10
-30
VIN = 0V
IO+
Output high short circuit pulsed
current
1.5
2.3
A
VO = 0V, VIN = VS
PW ≤ 10 μs
IO-
Output low short circuit pulsed
current
1.5
3.3
VO = 15V , VIN = 0V
PW ≤ 10 μs
IR25600SPBF
4
www.irf.com
© 2012 International Rectifier
April 2, 2012 | PD#
Functional Block Diagram
IR25600SPBF
5
www.irf.com
© 2012 International Rectifier
April 2, 2012 | PD#
Lead Definitions
Symbol
Description
INA
Logic input gate driver output (OUTA), in phase
INB
Logic input gate driver output (OUTB), in phase
OUTA
Gate drive output A
OUTB
Gate drive output B
VS
Supply Voltage
GND
Ground
Lead Assignments
8
7
6
5
NC NC
INA
1
2
3
4
VS
OUTA
OUTB
GND
INB
IR25600SPBF
6
www.irf.com
© 2012 International Rectifier
April 2, 2012 | PD#
Advance information
IR25600SPBF
7
www.irf.com
© 2012 International Rectifier
April 2, 2012 | PD#
Package Details
IR25600SPBF
8
www.irf.com
© 2012 International Rectifier
April 2, 2012 | PD#
Tape and Reel Details (SO8N)
CARRIER TAPE DIMENSION FOR 8SOICN
Code Min Max Min Max
A 7.90 8.10 0.311 0.318
B 3.90 4.10 0.153 0.161
C 11.70 12.30 0.46 0.484
D 5.45 5.55 0.214 0.218
E 6.30 6.50 0.248 0.255
F 5.10 5.30 0.200 0.208
G 1.50 n/a 0.059 n/a
H 1.50 1.60 0.059 0.062
REEL DIMENSIONS FOR 8SOICN
Code Min Max Min Max
A 329.60 330.25 12.976 13.001
B 20.95 21.45 0.824 0.844
C 12.80 13.20 0.503 0.519
D 1.95 2.45 0.767 0.096
E 98.00 102.00 3.858 4.015
F n/a 18.40 n/a 0.724
G 14.50 17.10 0.570 0.673
H 12.40 14.40 0.488 0.566
Metric
Imperial
Metric
Imperial
E
F
A
C
D
G
A
B
H
NOTE : CONTROLLING
DIMENSION IN MM
LOADED TAPE FEED DIRECTION
A
H
F
E
G
D
B
C
IR25600SPBF
9
www.irf.com
© 2012 International Rectifier
April 2, 2012 | PD#
Part Marking Information
IRxxxxx
IR logo
YWW ?
Part number
Date code
Pin 1
Identifier
Lot Code
(Prod mode
4 digit SPN code)
Assembly site code
Per SCOP 200-002
? XXXX
MARKING CODE
Lead Free Released
Non-Lead Free Released
?
P
IR25600SPBF
10
www.irf.com
© 2012 International Rectifier
April 2, 2012 | PD#
Qualification Information
Qualification Level
Industrial††
(per JEDEC JESD 47E)
Comments: This family of ICs has passed JEDEC’s
Industrial qualification. IR’s Consumer qualification level is
granted by extension of the higher Industrial level.
Moisture Sensitivity Level
MSL2†††
(per IPC/JEDEC J-STD-020C)
RoHS Compliant
Yes
Qualification standards can be found at International Rectifier’s web site http://www.irf.com/
††
Higher qualification ratings may be available should the user have such requirements. Please contact your
International Rectifier sales representative for further information.
†††
Higher MSL ratings may be available for the specific package types listed here. Please contact your
International Rectifier sales representative for further information.
The information provided in this document is believed to be accurate and reliable. However, International Rectifier assumes no responsibility
for the consequences of the use of this information. International Rectifier assumes no responsibility for any infringement of patents or of
other rights of third parties which may result from the use of this information. No license is granted by implication or otherwise under any
patent or patent rights of International Rectifier. The specifications mentioned in this document are subject to change without notice. This
document supersedes and replaces all information previously supplied.
For technical support, please contact IR’s Technical Assistance Center
http://www.irf.com/technical-info/
WORLD HEADQUARTERS:
233 Kansas St., El Segundo, California 90245
Tel: (310) 252-7105