API TECHNOLOGIES • 8061 Avonia Rd. • Fairview, PA 16415 • Ph: 814-474-1571 • Fax: 814-474-3110 • eis.apitech.com
API TECHNOLOGIES’ SPECTRUM CONTROL GmbH • Hansastrasse 6 • 91126 Schwabach, Germany • Phone: (49)-9122-795-0 • Fax: (49)-9122-795-58
FA1
■
Provide an EMI filtered signal or power
line between electronic system modules
■
Reduce cost . . . economical method
to meet EMC requirements
■
Reduce labor . . . eliminate need to
assemble filters into a bulkhead
■
Outperform surface mount EMI filters
at frequencies above 50 MHz
■
Reduce risk of damage to filter elements
due to thermal shock and installation
■
Improve reliability . . . every filter plate
is 100% tested for key parameters
■
Maximize real estate on PCB
■
Mixed schematics in a single filter plate package
Advantages of a Filtered Array
EMI Filtered Arrays
Easy Mate Filter Plates reduce
installation time and overall cost
with its patented snap-in design to
maximize real estate on PCBs. The
Easy Mate Jr. offers a lower profile for
installation of feed-through filters into
small hardware applications…FA3-FA8
Bolt-In Filter Plates provide EMI filtering
for signal and power lines and an excellent
method for electronic system interface. These
plates eliminate the need to mount filters into
bulkheads and are ideal for the isolation of
electronic compartments to suppress EMI…
FA9-FA12
our filter plates and terminal
blocks provide exceptional
EMI protection of signal
and power lines at a lower
total installed cost
Barrier Strip Filtered Terminal Blocks
are available in 2 to 6 terminal versions
and our filter elements provide high
insertion loss for EMI/RFI filtering of
AC and DC power and control
lines…FA19-FA20
PCB Mount Filtered Terminal Blocks
with 2 to 12 terminals available, they
provide quick and easy PCB installation
and maintenance with a filter element
that delivers high insertion loss for
EMI/RFI filtering of low voltage DC
power and control lines…FA22-FA23
Custom Filtered Arrays help meet
your design or manufacturing parameters
through special mechanical and electrical
specifications or by adding varying cable
lengths and terminations for a complete
turnkey assembly. Custom high reliability
assemblies available…FA24
API TECHNOLOGIES • 8061 Avonia Rd. • Fairview, PA 16415 • Ph: 814-474-1571 • Fax: 814-474-3110 • eis.apitech.com
API TECHNOLOGIES’ SPECTRUM CONTROL GmbH • Hansastrasse 6 • 91126 Schwabach, Germany • Phone: (49)-9122-795-0 • Fax: (49)-9122-795-58
Filter Plates
FA2
Eliminating EMI/RFI interference has become a stringently
enforced matter and needs to be considered at the early
stages of design for all electronic systems. Both internal
and external interference sources have a major impact
on the successful EMC performance of a new system.
Shielding alone is unsatisfactory in shunting unwanted
harmonics, conducted or radiated, on power/control
lines that run through compartments of an electronic
enclosure. This is particularly applicable in systems
operating at frequencies above 50 MHz. Isolation and
the incorporation of feed-through filters (Filter Plates) to
facilitate entering or leaving sensitive compartments in
an assembly are excellent methods to bring electronic
interdependent functions/systems into compliance.
Filter plates allow a means of interfacing voltage
and/or data (controlling instructions) to distant areas of
a system without compromising its performance. Filter
plates provide excellent isolation from 5 MHz to 18 GHz
and beyond, reduce the labor involved for installation,
and reduce the risk of damaging filter elements during
installation. Connecting to these filter plates is easily
accomplished through several methods, including ribbon
style connectors, harnesses, hard wiring or directly
soldering leads at a 90° angle to the printed circuit board.
The drawings on pages FA4, FA10 and FA14 illustrate
how filter plates are incorporated into an electronic system.
Filter Plate Advantages
■
Provide an EMI filtered signal line between
electronic system modules
■
Reduce cost . . . economical method to meet EMC
requirements
■
Reduce labor . . . eliminate need to assemble filters
into a bulkhead
■
Outperform surface mount EMI filters at frequencies
above 50 MHz
■
Reduce risk of damage to filter elements due to
thermal shock and installation
■
Improve reliability . . . every filter plate is 100%
tested for key parameters
■
Maximize real estate on PCB
■
Mixed schematics in a single filter plate package
Bolt-in Plates
Easy Mate Plates
Custom Plate Solutions
API TECHNOLOGIES • 8061 Avonia Rd. • Fairview, PA 16415 • Ph: 814-474-1571 • Fax: 814-474-3110 • eis.apitech.com
API TECHNOLOGIES’ SPECTRUM CONTROL GmbH • Hansastrasse 6 • 91126 Schwabach, Germany • Phone: (49)-9122-795-0 • Fax: (49)-9122-795-58
FA3
Easy Mate Filter Plates
API’s Spectrum Control brand developed an EMI/RFI
filter plate, Easy Mate, which simplifies installation and
eliminates the need for mounting hardware. The Easy
Mate, patented, is designed to “snap” into the chassis
of electronic systems, reducing the labor required to
complete a plate installation. The drawing on page FA4
shows the Easy Mate design.
These plates are available in two lengths and in both
standard density centers (.100") and high-densitycenters
(2mm). Standard density Easy Mate plates offer up to 26
lines per plate in a double row configuration, while high-
density plates offer up to 32 lines. Custom sizes for Easy
Mate plates are available.
Example: 52-898-206-BA2
The part number shown represents an Easy Mate filter plate with 2 rows,
6 filters per row. Filters are C style with a capacitance value of 100pF.
The plate length is 1.092", and the leads are bent 90° to the right side.
52 - 898 - 2 06 - B A 2
Easy Mate Advantages
■
Reduces installation time and overall cost
■
Eliminates mounting hardware and prepwork
■
Flexibility for 1 or 2 rows and standard density
centers (.100") or high density centers (2mm)
■
Improves overall quality and reliability
■
Multiple dimpled finger ground contacts
provides excellent long term EMI filtering
from 5 MHz to 18 GHz
■
Outperforms surface mount devices
■
Maximize real estate on PCB
■
Mixed capacitance values and schematics
■
Ideal for isolation of electronic compartments
■
Available in RoHS compliant versions
Ordering Information
Filter
Plates
898
Easy Mate
Standard
Density
960
Easy Mate
Hi-density *
No. of
Rows
1= 1 row
2= 2 rows
Plate Length
A- 1.092 (27.74mm)
B- 1.812 (46.02mm)
Lead Configuration
0- Straight
1- 90° (left)
2- 90° (right)
3- 90° (both)
Number
of Lines
per Row
If less than
10, use a 0
(zero) first.
Filter
Designation
A - T from
table on page
118. ***
No. of
Filters
*Maximum capacitance
up to 4000pF C style filter
*** To request selective line filtering, a mechanical
configuration or material specification not shown in this
catalog, please complete and forward the design inquiry
form on page FA18. We will review your request and
provide you with a part number.
**
**Replace “–” with “F” for
RoHS complaint version
API TECHNOLOGIES • 8061 Avonia Rd. • Fairview, PA 16415 • Ph: 814-474-1571 • Fax: 814-474-3110 • eis.apitech.com
API TECHNOLOGIES’ SPECTRUM CONTROL GmbH • Hansastrasse 6 • 91126 Schwabach, Germany • Phone: (49)-9122-795-0 • Fax: (49)-9122-795-58
Soldering to Filter Terminals
■
Use a temperature controlled soldering iron with
tip temperature of 525 ± 10° F (275 ± 5° C).
■
Use an SN 63 RMA flux core solder.
■
Make mechanical wire connection.
■
Use heat sink next to filter body where possible.
■
Clean soldering iron tip.
■
Clip end of solder—remove 0.5" (12.7mm) to expose
flux for soldering.
■
Apply soldering iron to wire/flag junction at wetted
solder tip region of iron (Wetted Bridge Method).
Immediately apply solder. Dwell time for soldering
iron tip on product should be 3-5 seconds maximum.
(For non-RoHS versions only)
Patented
Mechanical Specifications
Base Plate
Material............................ Beryllium copper
Base Plate
Thickness.......................... .012 inches (0.30mm)
Plating .............................. Tin,
RoHS version will be silver
Lead Material ................. Copper alloy
Lead Plating.................... Gold plate
Lead Diameter............... ø .025" (.64mm) for 0.100"
centers (2.54mm)
ø .020 (.51mm) for 0.079"
centers (2.00mm)
Current Rating................ 5 Amps for .025" ø
(.64mm)
3 Amps for .020" ø
(.51mm)
Easy Mate Filter Plates
FA4
API TECHNOLOGIES • 8061 Avonia Rd. • Fairview, PA 16415 • Ph: 814-474-1571 • Fax: 814-474-3110 • eis.apitech.com
API TECHNOLOGIES’ SPECTRUM CONTROL GmbH • Hansastrasse 6 • 91126 Schwabach, Germany • Phone: (49)-9122-795-0 • Fax: (49)-9122-795-58
Easy Mate Filter Plates
Standard Density Centers .100"
FA5
Dimensions:
inches and (mm)
Lead Spacing:
.100" (2.54 mm)
Typical Mounting Applications
Standard Density
.100" Centers
Board mounted
to .312 standoffs
High-Density
2mm Centers
Board mounted
to .312 standoffs
Single
Row
Patented
† Refers to lead configuration for part number/ordering information
A
BC
.100 (2.54)
.622 (15.80)
.150 (3.81)
.150 (3.81)
.118 (3.00)
.118 (3.00) .118 (3.00)
.118 (3.00)
.540 (13.71)
1.102 (28.00)
.921 (23.40) .850 (21.60)
.315 (8.00)
MAX.
.315 (8.00)
MAX.
.315 (8.00)
MAX.
.315
(8.00)
MAX.
.374
(9.50)
.374
(9.50)
.381
(9.68)
.675
(17.15)
.294
(7.47)
.294
(7.47)
.374
(9.50)
Pin 1
A
BC
.100 (2.54)
.150 (3.81)
.150 (3.81)
.118 (3.00)
.118 (3.00) .118 (3.00)
.540
(13.71)
1.102 (28.00)
1.02 (25.93) .950 (24.13)
.875 (22.22)
.315 (8.00)
MAX.
.622 (15.80)
.100 (2.54)
.335 (8.51)
Pin 1
.335 (8.51)
Straight
(0) †
90° Both
(3) †
90° Left
(1) †
90° Right
(2) †
Double
Row
Straight
(0) †
90° Both
(3) †
90° Left
(1) †
90° Right
(2) †
.118 (3.00)
.315
(8.00)
MAX.
.315
(8.00)
MAX.
.315
(8.00)
MAX.
.374
(9.50)
.374
(9.50)
.394
(10.00)
.474
(12.04)
.474
(12.04)
.374
(9.50)
.481
(12.22)
.381
(9.68)
.474
(12.04)
.675
(17.15) .394
(10.00)
.294
(7.47)
.294
(7.47)
52-898-XXX-XXX
BC
No. of
filtered lines
per row
Plate
length (A)
10(0.00) 0.496 (12.60)
2 0.1 (2.54) 0.496 (12.60)
1.092 3 0.2 (5.08) 0.396 (10.06)
(27.74) 4 0.3 (7.62) 0.396 (10.06)
5 0.4 (10.16) 0.296 (7.52)
6 0.5 (12.70) 0.296 (7.52)
10(0.00) 0.906 (23.01)
2 0.1 (2.54) 0.806 (20.47)
3 0.2 (5.08) 0.806 (20.47)
4 0.3 (7.62) 0.706 (17.93)
5 0.4 (10.16) 0.706 (17.93)
1.812 6 0.5 (12.70) 0.606 (15.39)
(46.02) 7 0.6 (15.24) 0.606 (15.39)
8 0.7 (17.78) 0.506 (12.85)
9 0.8 (20.32) 0.506 (12.85)
10 0.9 (22.86) 0.406 (10.31)
11 1.0 (25.40) 0.406 (10.31)
12 1.1 (27.94) 0.306 (7.77)
13 1.2 (30.48) 0.306 (7.77)
.012 (.31)
.474 (12.05)
.374 (9.51)
.312 (7.93)
.265 (6.74)
.057 (1.45)
Chassis
.062 (1.58)
Board
.675
(17.17)
.875
(22.25)
.406
(10.32)
.306
(7.78)
.640
(16.26)
.186
(4.73)
.012 (.31)
.453 (11.51)
.374 (9.51)
.312 (7.93)
.265 (6.74)
.057 (1.45)
Chassis
.062 (1.58)
Board .675
(17.17)
.833
(21.16)
.385
(9.78)
.306
(7.78)
.640
(16.26)
.186
(4.73)
API TECHNOLOGIES • 8061 Avonia Rd. • Fairview, PA 16415 • Ph: 814-474-1571 • Fax: 814-474-3110 • eis.apitech.com
API TECHNOLOGIES’ SPECTRUM CONTROL GmbH • Hansastrasse 6 • 91126 Schwabach, Germany • Phone: (49)-9122-795-0 • Fax: (49)-9122-795-58
Easy Mate Filter Plates
Hi-Density Centers 2mm
Dimensions:
inches and (mm)
Lead Spacing:
.079" (2.00 mm)
Easy M ate
Chassis Cut-out Design
Patent Pending
Single
Row
Patented
† Refers to lead configuration for part number/ordering information
A
BC
.079 (2.00)
.622 (15.80)
.150 (3.81)
.150 (3.81)
.118 (3.00)
.118 (3.00) .118 (3.00)
.118 (3.00)
.540 (13.71)
1.102 (28.00)
.921 (23.40) .850 (21.60)
.315 (8.00)
MAX.
.315 (8.00)
MAX.
.315 (8.00)
MAX.
.315
(8.00)
MAX.
.374
(9.50)
.374
(9.50)
.381
(9.68)
.675
(17.15)
.294
(7.47)
.294
(7.47)
Pin 1
A
B
A
B
A
B
Casting
C
.079 (2.00)
.150 (3.81)
.150 (3.81)
.118 (3.00)
.118 (3.00) .118 (3.00)
.540
(13.71)
1.102 (28.00)
1.02 (25.93) .930 (23.62)
.833 (21.60)
.315 (8.00)
MAX.
.622 (15.80)
.010 (.25) .470 (11.95)
.010 (.25) .470 (11.95)
.079 (2.00)
.335 (8.51)
Pin 1
.335 (8.51)
Straight
(0) †
90° Both
(3) †
90° Left
(1) †
90° Right
(2) †
Double
Row
Straight
(0) †
90° Both
(3) †
90° Left
(1) †
90° Right
(2) †
.118 (3.00)
.315
(8.00)
MAX.
.315
(8.00)
MAX.
.315
(8.00)
MAX.
.374
(9.50)
.374
(9.50)
.373
(9.47)
.453
(11.51)
.453
(11.51)
.374
(9.50)
.481
(12.22)
.381
(9.68)
.474
(12.04)
.675
(17.15) .373
(9.47)
.294
(7.47)
.294
(7.47)
52-960-XXX-XXX
BC
No. of
filtered lines
per row
Plate
length (A)
2 0.079 (2.00) 0.463 (11.77)
3 0.157 (4.00) 0.463 (11.77)
1.092 4 0.236 (6.00) 0.385 (9.77)
(27.74) 5 0.315 (8.00) 0.385 (9.77)
6 0.394 (10.00) 0.306 (7.77)
7 0.472 (12.00) 0.306 (7.77)
2 0.079 (2.00) 0.866 (22.00)
3 0.157 (4.00) 0.787 (20.00)
4 0.236 (6.00) 0.787 (20.00)
5 0.315 (8.00) 0.709 (18.00)
6 0.394 (10.00) 0.709 (18.00)
7 0.472 (12.00) 0.630 (16.00)
1.812 8 0.551 (14.00) 0.630 (16.00)
(46.02) 9 0.630 (16.00) 0.551 (14.00)
10 0.709 (18.00) 0.551 (14.00)
11 0.787 (20.00) 0.472 (12.00)
12 0.866 (22.00) 0.472 (12.00)
13 0.945 (24.00) 0.394 (10.00)
14 1.024 (26.00) 0.394 (10.00)
15 1.102 (28.00) 0.315 (8.00)
16 1.181 (30.00) 0.315 (8.00)
FA6
.374
(9.50)
.670
(17.04)
.057 ±.002
(1.45 ±.05)
Housing thickness
beyond output
customer’s option
APlate Length B
1.092 (27.74) 1.117 (28.41) 0.816 (20.75)
1.812 (46.02) 1.837 (46.71) 1.535 (39.04)
API TECHNOLOGIES • 8061 Avonia Rd. • Fairview, PA 16415 • Ph: 814-474-1571 • Fax: 814-474-3110 • eis.apitech.com
API TECHNOLOGIES’ SPECTRUM CONTROL GmbH • Hansastrasse 6 • 91126 Schwabach, Germany • Phone: (49)-9122-795-0 • Fax: (49)-9122-795-58
FA7
Easy Mate Jr. Filter Plates
API’s Spectrum Control brand has expanded its popular
Easy Mate family by adding two more package sizes.
These new sizes are lower profile and facilitate installation
of feed-through filters into small hardware applications
such as PCS linear power amplifiers and RF transmitters.
The Easy Mate Jr. is available in two plate lengths, .990"
and 1.240", and in standard (.100") and high density
centers (2mm).
Easy Mate Jr. Advantages ■
Reduces installation time and overall cost
■
Eliminates mounting hardware and prepwork
■
Increase flexibility with standard density centers
(.100") or high density centers (2mm)
■
Improves overall quality and reliability
■
Multiple finger ground contacts provide excellent
EMI filtering from 5 MHz to 18 GHz
■
Outperforms surface mount devices
■
Maximize real estate on PCB
■
Mixed capacitance values and schematics
■
Ideal for isolation of electronic compartments
■
Available in RoHS compliant versions
Mechanical Specifications
Base Plate
Material ..........................Beryllium copper
Base Plate
Thickness .........................010 inches (.25mm)
Plating.............................Tin,
RoHS version will be silver
Lead Material................Copper alloy
Lead Plating ..................Gold plate
Lead Diameter..............ø .025" (.64mm)
for 0.100" centers (2.54mm)
.......................................ø .020 (.51mm)
for 0.079" centers (2.00mm)
Current Rating ..............5 Amps for .025" ø (.64mm)
3 Amps for .020" ø (.51mm)
Example: 52-978-106-BA2
The part number shown represents an Easy Mate Jr. filter plate with 6
filters. Filters are C style with a capacitance value of 100pF. The plate
length is .990", and the leads are bent 90° to the right side.
52 - 978 - 1 06 - B A 2
Ordering Information
Filter
Plates
978
Easy Mate Jr.
Standard
Density
979
Easy Mate Jr.
High-density *
No. of
Rows
1= 1 row
Plate Length
A- .990 (25.15mm)
B- 1.240 (31.49mm)
Lead Configuration
0- Straight
1- 90° (left)
2- 90° (right)
3- 90° (both)
Number
of Lines
per Row
If less than
10, use a 0
(zero) first.
Filter
Designation
A - T from
table on page
FA17. ***
No. of
Filters
*Maximum capacitance
up to 4000pF C style filter
*** To request selective line filtering, a mechanical
configuration or material specification not shown in this
catalog, please complete and forward the design inquiry
form on page FA18. We will review your request and
provide you with a part number.
**
**Replace “–” with “F” for
RoHS complaint version
API TECHNOLOGIES • 8061 Avonia Rd. • Fairview, PA 16415 • Ph: 814-474-1571 • Fax: 814-474-3110 • eis.apitech.com
API TECHNOLOGIES’ SPECTRUM CONTROL GmbH • Hansastrasse 6 • 91126 Schwabach, Germany • Phone: (49)-9122-795-0 • Fax: (49)-9122-795-58
Easy Mate Jr. Filter Plates
Dimensions:
inches and (mm)
Typical Mounting Application
Standard Density Centers
.100" (D)
FA8
Single
Row
Straight
(0) †
Double Bends
(3) †
90° Left
(1) †
90° Right
(2) †
† Refers to lead configuration for part number/ordering information
A
B
D
C
.090 (2.29)
.090 (2.29)
.180
(4.57)
.260
(6.60)
.118 (3.00)
.315
(8.00)
MAX.
.420 (10.67)
.850 (21.59)
.118 (3.00)
.284
(7.21) .315
(8.00)
MAX.
.296 (7.52)
.675 (17.15)
.118 (3.00)
.284
(7.21) .315
(8.00)
MAX.
.379 (9.63)
.798 (20.27)
.284 (7.22)
.090
(2.29)
.296
(7.52)
.010
(.25)
.675 (17.16)
.265 (6.74)
.062 (1.58) Board
.057 (1.45)
Chassis
.640 (16.27) .312 (7.93)
A
B
.173 (4.40)
Casting
.313
(7.96)
.008 (.20)
R.062 (4X) (1.58) R.015 MAX. (.38)
A
B
.173 (4.40)
.008 (.20)
R.010 MAX. (.25)
.057 Thick
>.057 (1.45)
Optional thickness
by customer
2° draft
per side
.046 ± .002
(1.17 ± .05)
52-978-XXX-XXX
BC
No. of
filtered lines
per row
Plate
length (A)
2 0.1 (2.54) 0.395 (10.03)
3 0.2 (5.08) 0.395 (10.03)
.990 4 0.3 (7.62) 0.295 (7.49)
(25.15) 5 0.4 (10.16) 0.295 (7.49)
6 0.5 (12.70) 0.195 (4.95)
7 0.6 (15.24) 0.195 (4.95)
2 0.1 (2.54) 0.570 (14.48)
3 0.2 (5.08) 0.470 (11.94)
4 0.3 (7.62) 0.470 (11.94)
1.24 5 0.4 (10.16) 0.370 (9.40)
(31.49) 6 0.5 (12.70) 0.370 (9.40)
7 0.6 (15.24) 0.270 (6.86)
8 0.7 (17.78) 0.270 (6.86)
9 0.8 (20.32) 0.170 (4.32)
10 0.9 (22.86) 0.170 (4.32)
High Density Centers
2mm (D)
52-979-XXX-XXX
BC
No. of
filtered lines
per row
Plate
length (A)
2 0.079 (2.00) 0.417 (10.58)
3 0.157 (4.00) 0.417 (10.58)
.990 4 0.236 (6.00) 0.338 (8.58)
(25.15) 5 0.315 (8.00) 0.338 (8.58)
6 0.394 (10.00) 0.259 (6.58)
7 0.472 (12.00) 0.259 (6.58)
2 0.079 (2.00) 0.580 (14.75)
3 0.157 (4.00) 0.502 (12.75)
4 0.236 (6.00) 0.502 (12.75)
1.24 5 0.315 (8.00) 0.423 (10.75)
(31.49) 6 0.394 (10.00) 0.423 (10.75)
7 0.472 (12.00) 0.344 (8.75)
8 0.551 (14.00) 0.344 (8.75)
9 0.630 (16.00) 0.266 (6.75)
10 0.709 (18.00) 0.266 (6.75)
Easy Mate Jr. Chassis Cut-out Design
Patented
APlate Length B
.990 (25.15) 1.015 (25.78) 0.834 (21.18)
1.24 (31.49) 1.265 (32.13) 1.084 (27.53)
API TECHNOLOGIES • 8061 Avonia Rd. • Fairview, PA 16415 • Ph: 814-474-1571 • Fax: 814-474-3110 • eis.apitech.com
API TECHNOLOGIES’ SPECTRUM CONTROL GmbH • Hansastrasse 6 • 91126 Schwabach, Germany • Phone: (49)-9122-795-0 • Fax: (49)-9122-795-58
FA9
Bolt-in Style Filter Plates
The Bolt-in style plate provides an excellent method
for electronic system interface and EMI filtering. Bolt-in
filter plates are available in a variety of plate sizes and
up to 74 lines per plate in high-density (2mm) and 60 pins
per plate in standard density (.100"). On the larger plate
sizes, API ensures structural integrity through a unique,
patent pending, coining process. The drawing on page
FA10 shows an electronic system utilizing Bolt-in style
filter plates.
Bolt-in Filter Plate Advantages
■
Eliminates the need to assemble filters into
a bulkhead
■
Excellent filtering from 5 MHz to 1 GHz
■
Total cost savings vs. customer installed discrete
filter elements
■
Ideal for isolation of electronic compartments
to suppress EMI
■
Outperforms surface mount filters over 50 MHz
■
Improved reliability
■
Mixed capacitance values and schematics
■
Maximize real estate on PCB
■
Available in RoHS compliant versions
Example: 52-970-208-BB2
The part number shown represents a Bolt-in style filter plate with 2 rows,
8 filters per row. Filters are C style with a capacitance value of 100pF.
The plate length is 1.560", and the leads are bent 90° to the right side.
52 - 970 - 2 08 - B B 2
Ordering Information
Filter
Plates
970
Bolt-in
Standard
Density
971
Bolt-in
High Density *
No. of
Rows
1= 1 row
2= 2 rows
Plate Length
A- 1.060 (26.92mm)
B- 1.560 (39.62mm)
C- 2.560 (65.02mm)
D- 3.560 (90.42mm)
Lead Configuration
0- Straight
1- 90° (left)
2- 90° (right)
3- 90° (both)
Number
of Lines
per Row
If less than
10, use a 0
(zero) first.
Filter
Designation
A - T from
table on page
FA17. ***
No. of
Filters
*Maximum capacitance
up to 4000pF C style filter
*** To request selective line filtering, a mechanical
configuration or material specification not shown in this
catalog, please complete and forward the design inquiry
form on page FA18. We will review your request and
provide you with a part number.
**
**Replace “–” with “F” for
RoHS complaint version
API TECHNOLOGIES • 8061 Avonia Rd. • Fairview, PA 16415 • Ph: 814-474-1571 • Fax: 814-474-3110 • eis.apitech.com
API TECHNOLOGIES’ SPECTRUM CONTROL GmbH • Hansastrasse 6 • 91126 Schwabach, Germany • Phone: (49)-9122-795-0 • Fax: (49)-9122-795-58
Bolt-in Style Filter Plates
FA10
Mechanical Specifications
Base Plate
Material.......................... Brass UNS C26000/C27000
Base Plate
Thickness........................ .020 inches (.51mm)
Plating ............................ Tin,
RoHS version will be silver
Lead Material ............... Copper alloy
Lead Plating.................. Gold plate
Lead Diameter............. ø .025" (.64mm)
for 0.100" centers (2.54mm)
....................................... ø .020 (.51mm)
for 0.079" centers (2.00mm)
Current Rating.............. 5 Amps for .025" (.64mm) ø
3 Amps for .020" (.51mm) ø
Coining feature
Patented
API TECHNOLOGIES • 8061 Avonia Rd. • Fairview, PA 16415 • Ph: 814-474-1571 • Fax: 814-474-3110 • eis.apitech.com
API TECHNOLOGIES’ SPECTRUM CONTROL GmbH • Hansastrasse 6 • 91126 Schwabach, Germany • Phone: (49)-9122-795-0 • Fax: (49)-9122-795-58
Bolt-in Style Filter Plates
Standard Density Centers .100"
FA11
Dimensions:
inches and (mm)
Lead Spacing:
.100" (2.54 mm)
Single
Row
Coining feature patented
† Refers to lead configuration for part number/ordering information
* For plate widths 1.060 and 1.560 there will be no coining.
For these plates, increase dimensions to the right .020".
Thus, any dimension on left will be reduced by .020.
Straight
(0) †
90° Both
(3) †
90° Left
(1) †
90° Right
(2) †
Double
Row
Straight
(0) †
90° Both
(3) †
90° Left
(1) †
90° Right
(2) †
A
B
C
.250 (6.35)
.100 (2.54)
.675 (17.15)
.300 (7.62)
.300 (7.62) .300 (7.62)
.300 (7.62)
1.102 (28.00)
.921 (23.40)
.850 (21.60)
.020 (.51)
Pin 1
Ø .120 x2
Pin 1
Ø .120 x2
A-.200
A
B
C
.100 (2.54)
.200 (5.08) .200 (5.08)
.200 (5.08)
.020 (.51)
1.102 (28.00)
.875 (22.22)
.950 (24.13)
1.02 (25.93)
.200 (5.08)
.100 (2.54)
.100 (2.54)
A-.200
.100
(2.54)
.500
(12.70)
.020
(.51)
.020
(.51)
.020
(.51)
.020
(.51)
.020
(.51)
.290
(7.37)
.020
(.51) .385
(9.78)
.500
(12.70)
.020
(.51)
.020
(.51)
.020
(.51)
.020
(.51)
.020
(.51)
.020
(.51)
.474
(12.07)
.485
(12.32)
.385
(9.78)
.290
(7.37)
.290
(7.37)
.020
(.51)
.538
(13.71)
.474
(12.07)
.474
(12.07)
.675
(17.15) .390
(9.90)
.390
(9.90)
.100
(2.54)
.250
(6.35)
.020
(.51) .290
(7.37)
.538
(13.71)
.374
(9.50)
.374
(9.50)
.374
(9.50)
.315
(8.00)
MAX.
.315
(8.00)
MAX.
.315
(8.00)
MAX.
.315
(8.00)
MAX.
.315
(8.00)
MAX.
.315
(8.00)
MAX.
.315
(8.00)
MAX.
.315
(8.00)
MAX.
52-970-XXX-XXX
BC
No. of
filtered lines
per row
Plate
length (A)
1 0 (0.00) 0.53 (13.46)
1.060 *2 0.1 (2.54) 0.43 (10.92)
(26.92) 3 0.2 (5.08) 0.43 (10.92)
4 0.3 (7.62) 0.33 (8.38)
5 0.4 (10.16) 0.33 (8.38)
1 0.0 (0.00) 0.73 (18.54)
2 0.1 (2.54) 0.73 (18.54)
3 0.2 (5.08) 0.63 (16.00)
4 0.3 (7.62) 0.63 (16.00)
1.560 *5 0.4 (10.16) 0.53 (13.46)
(39.62) 6 0.5 (12.70) 0.53 (13.46)
7 0.6 (15.24) 0.43 (10.92)
8 0.7 (17.78) 0.43 (10.92)
9 0.8 (20.32) 0.33 (8.38)
10 0.9 (22.86) 0.33 (8.38)
5 0.4 (10.16) 1.03 (26.16)
6 0.5 (12.70) 1.03 (26.16)
7 0.6 (15.24) 0.93 (23.62)
8 0.7 (17.78) 0.93 (23.62)
9 0.8 (20.32) 0.83 (21.08)
10 0.9 (22.86) 0.83 (21.08)
11 1.0 (25.40) 0.73 (18.54)
2.560 12 1.1 (27.94) 0.73 (18.54)
(65.02) 13 1.2 (30.48) 0.63 (16.00)
14 1.3 (33.02) 0.63 (16.00)
15 1.4 (35.56) 0.53 (13.46)
16 1.5 (38.10) 0.53 (13.46)
17 1.6 (40.64) 0.43 (10.92)
18 1.7 (43.18) 0.43 (10.92)
19 1.8 (45.72) 0.33 (8.38)
20 1.9 (48.26) 0.33 (8.38)
13 1.2 (30.48) 1.13 (27.70)
14 1.3 (33.02) 1.13 (27.70)
15 1.4 (35.56) 1.03 (26.16)
16 1.5 (38.10) 1.03 (26.16)
17 1.6 (40.64) 0.93 (23.62)
18 1.7 (43.18) 0.93 (23.62)
19 1.8 (45.72) 0.83 (21.08)
20 1.9 (48.26) 0.83 (21.08)
3.560 21 2.0 (50.80) 0.73 (18.54)
(90.42) 22 2.1 (53.34) 0.73 (18.54)
23 2.2 (55.88) 0.63 (16.00)
24 2.3 (58.42) 0.63 (16.00)
25 2.4 (60.96) 0.53 (13.46)
26 2.5 (63.50) 0.53 (13.46)
27 2.6 (66.04) 0.43 (10.92)
28 2.7 (68.58) 0.43 (10.92)
29 2.8 (71.12) 0.33 (8.38)
30 2.9 (73.66) 0.33 (8.38)
API TECHNOLOGIES • 8061 Avonia Rd. • Fairview, PA 16415 • Ph: 814-474-1571 • Fax: 814-474-3110 • eis.apitech.com
API TECHNOLOGIES’ SPECTRUM CONTROL GmbH • Hansastrasse 6 • 91126 Schwabach, Germany • Phone: (49)-9122-795-0 • Fax: (49)-9122-795-58
Bolt-in Style Filter Plates
High-Density Centers 2mm
Dimensions:
inches and (mm)
Lead Spacing:
.079" (2.00 mm)
Single
Row
Coining feature patented
† Refers to lead configuration for part number/ordering information
* For plate widths 1.060 and 1.560 there will be no coining.
For these plates, increase dimensions to the right .020".
Thus, any dimension on left will be reduced by .020.
Straight
(0) †
90° Both
(3) †
90° Left
(1) †
90° Right
(2) †
Double
Row
Straight
(0) †
90° Both
(3) †
90° Left
(1) †
90° Right
(2) †
A
B
C
.250 (6.35)
.079 (2.00)
.675 (17.15)
.289 (7.34)
.289 (7.34) .289 (7.34)
.289 (7.34)
1.102 (28.00)
.921 (23.40)
.850 (21.60)
.020 (.51)
Pin 1
Ø .120 x2
Pin 1
Ø .120 x2
A-.200
A
B
C
.100 (2.54)
.210 (5.33) .210 (5.33)
.210 (5.33)
.020 (.51)
1.102 (28.00)
.833 (21.16)
.930 (23.62)
1.000 (25.40)
.210 (5.33)
.079 (2.00)
.079 (2.00)
A-.200
.100
(2.54)
.500
(12.70)
.020
(.51)
.020
(.51)
.020
(.51)
.020
(.51)
.020
(.51)
.290
(7.37)
.020
(.51) .385
(9.78)
.500
(12.70)
.020
(.51)
.020
(.51)
.020
(.51)
.020
(.51)
.020
(.51)
.020
(.51)
.453
(11.51)
.464
(11.79)
.385
(9.78)
.290
(7.37)
.290
(7.37)
.020
(.51)
.538
(13.71)
.453
(11.51)
.453
(11.51)
.675
(17.15) .369
(9.37)
.369
(9.37)
.079
(2.00)
.250
(6.35)
.020
(.51) .290
(7.37)
.538
(13.71)
.374
(9.50)
.374
(9.50)
.374
(9.50)
.315
(8.00)
MAX.
.315
(8.00)
MAX.
.315
(8.00)
MAX.
.315
(8.00)
MAX.
.315
(8.00)
MAX.
.315
(8.00)
MAX.
.315
(8.00)
MAX.
.315
(8.00)
MAX.
52-971-XXX-XXX
BC
No. of
filtered lines
per row
Plate
length (A)
2 0.079 (2.00) 0.487 (12.38)
1.060 *3 0.157 (4.00) 0.409 (10.38)
(26.92) 4 0.236 (6.00) 0.409 (10.38)
5 0.315 (8.00) 0.330 (8.38)
6 0.394 (10.00) 0.330 (8.38)
3 0.157 (4.00) 0.662 (16.81)
4 0.236 (6.00) 0.662 (16.81)
5 0.315 (8.00) 0.583 (14.81)
6 0.394 (10.00) 0.583 (14.81)
1.560 *7 0.472 (12.00) 0.504 (12.81)
(39.62) 8 0.551 (14.00) 0.504 (12.81)
9 0.630 (16.00) 0.426 (10.81)
10 0.709 (18.00) 0.426 (10.81)
11 0.787 (20.00) 0.347 (8.81)
12 0.866 (22.00) 0.347 (8.81)
10 0.709 (18.00) 0.886 (22.51)
11 0.787 (20.00) 0.886 (22.51)
12 0.866 (22.00) 0.807 (20.51)
13 0.945 (24.00) 0.807 (20.51)
14 1.024 (26.00) 0.729 (18.51)
15 1.102 (28.00) 0.729 (18.51)
16 1.181 (30.00) 0.650 (16.51)
2.560 17 1.260 (32.00) 0.650 (16.51)
(65.02) 18 1.339 (34.00) 0.571 (14.51)
19 1.417 (36.00) 0.571 (14.51)
20 1.496 (38.00) 0.492 (12.51)
21 1.575 (40.00) 0.492 (12.51)
22 1.654 (42.00) 0.414 (10.51)
23 1.732 (44.00) 0.414 (10.51)
24 1.811 (46.00) 0.335 (8.51)
25 1.890 (48.00) 0.335 (8.51)
20 1.496 (38.00) 0.993 (25.22)
21 1.575 (40.00) 0.993 (25.22)
22 1.654 (42.00) 0.914 (23.22)
23 1.732 (44.00) 0.914 (23.22)
24 1.811 (46.00) 0.835 (21.22)
25 1.890 (48.00) 0.835 (21.22)
26 1.969 (50.00) 0.757 (19.22)
27 2.047 (52.00) 0.757 (19.22)
3.560 28 2.126 (54.00) 0.678 (17.22)
(90.42) 29 2.205 (56.00) 0.678 (17.22)
30 2.283 (58.00) 0.599 (15.22)
31 2.362 (60.00) 0.599 (15.22)
32 2.441 (62.00) 0.520 (13.22)
33 2.520 (64.00) 0.520 (13.22)
34 2.598 (66.00) 0.442 (11.22)
35 2.677 (68.00) 0.442 (11.22)
36 2.756 (70.00) 0.363 (9.22)
37 2.835 (72.00) 0.363 (9.22)
FA12
API TECHNOLOGIES • 8061 Avonia Rd. • Fairview, PA 16415 • Ph: 814-474-1571 • Fax: 814-474-3110 • eis.apitech.com
API TECHNOLOGIES’ SPECTRUM CONTROL GmbH • Hansastrasse 6 • 91126 Schwabach, Germany • Phone: (49)-9122-795-0 • Fax: (49)-9122-795-58
FA15
Custom Filter Plates
High Volume Industrial
As a long-term producer of filter plates for industrial
applications, API Technologies understands the cost
requirements of this market. In turn, we have established
a program to develop and manufacture custom designed
filter plates for cost sensitive industrial applications.
We have engineered a variety of capacitive only
filter elements that provide excellent RF isolation from
5 MHz to 1 GHz and beyond. To determine the available
capacitance values, contact API. Our technical staff will
work with you to develop a solution that meets your
system and budget needs.
Military/High Reliability
Improving the electromagnetic compliance (EMC) of
electronic systems is an area of intense focus within
the defense and avionics industries. To achieve this goal,
many companies are replacing discrete filter elements
and surface mount filters with feed-through filter plate
assemblies for higher frequency isolation.
API will custom design a filter plate that meets your
size, material and filtering requirements. We are capable
of providing stringent testing and analysis of our filter
plate assemblies to MIL-F-15733 and MIL-F-28861.
API TECHNOLOGIES • 8061 Avonia Rd. • Fairview, PA 16415 • Ph: 814-474-1571 • Fax: 814-474-3110 • eis.apitech.com
API TECHNOLOGIES’ SPECTRUM CONTROL GmbH • Hansastrasse 6 • 91126 Schwabach, Germany • Phone: (49)-9122-795-0 • Fax: (49)-9122-795-58
Custom Capabilities
Filtered Headers
FA16
In addition to our custom filter plates, API Technologies’
Spectrum Control brand offers a number of value-added
features designed to complement your manufacturing
operation. Our marketing and engineering staff will
evaluate your design or manufacturing parameters
and develop a filter solution which provides increased
filtering performance economically.
API Capabilities
■
Custom assemblies with varying cable lengths and
impedances for high clock speeds associated with
digital electronics
■
Integrate a filter solution with other components
to ensure a completely functional device
■
Perform EMC evaluations on your equipment,
recommending proper placement of EMI/RFI
filtering components
Filtered Headers
Replace the unfiltered connector on your PC board with
API’s low cost filtered header. This innovative new product
allows you to meet EMC emissions and susceptibility
standards with minimal or no board change.
Flat Conductor Cables
Flat conductor cables are often selected as an effective
method of interconnection. API can save you time and
money by installing conductor cables to your filter plates.
Flat conductor cables are available in varying lengths,
conductor counts, and in several termination
configurations.
Lead Stabilizer
API has developed a filter plate lead
stabilizer bar to protect leads during
installation and ensure proper
alignment to PCB.
.540
(13.73)
100
(2.54)
.250 (6.36)
MIN.
Easy Mate
Bolt-in
Coining process
patented
Lead stabilizer
position can be
adjustable
.098 (2.49)
.300 (7.63)
.003 (.08)
X
AL
.100
(2.54)
.062
(1.58)
API TECHNOLOGIES • 8061 Avonia Rd. • Fairview, PA 16415 • Ph: 814-474-1571 • Fax: 814-474-3110 • eis.apitech.com
API TECHNOLOGIES’ SPECTRUM CONTROL GmbH • Hansastrasse 6 • 91126 Schwabach, Germany • Phone: (49)-9122-795-0 • Fax: (49)-9122-795-58
FA17
Filter Selection
S
R
Q
P
O
N
M
L
T
0
20
40
60
80
100
Insertion Loss (dB)
0
20
40
60
80
100
Insertion Loss (dB)
Pi Capacitor
Frequency
10GHz0.1MHz 1MHz 10MHz 100MHz 1GHz
Frequency
10GHz0.1MHz 1MHz 10MHz 100MHz 1GHz)
H
G
F
ED
CB
A
I
C-Style Capacitor
EMI Filter Performance
The electrical characteristics table and insertion loss
graphs indicate the performance of feed-through capacitors
and Pi type filters. Utilize this information to specify the
EMI filtering components included in your filter plate.
Custom Filtering
API Technologies’ Spectrum Control line of filter plates are
engineered to accommodate selective line filtering. Several
different types of filters may be specified in a single, easy
to install filter plate, allowing you to facilitate a wide range
of filtering requirements.
For selective line filtering, provide a sketch indicating
the filters and positions required. The example below
represents a 10 pin, 2 row plate with six 1000 pF feed-
through capacitors and four 1700 pF Pi type filters.
Above curves represent application of proper
grounding fundamentals, for assistance consult
with API.
F
F
F
F
F
F
R
R
R
R
Part Number
Based on front
view of plate
10
1
6
5
Typical Insertion Loss
Minimum Insertion Loss - Decibels (dB)
50 ohm system per MIL-STD-220 (no load)
* 3 dB cut-off frequency calculated at the maximum capacitance.
** For Hi-Density centers (2 mm) only C style filters are available, to a maximum of 4000pF.
All high density capacitors
are 50 volts @ 125°C.
5
MHz
Capacitance
ToleranceValue 10
MHz
20
MHz
50
MHz
100
MHz
200
MHz
500
MHz
1
GHz
Working
Voltage DC
-55°C to
+125°C
Filter**
Circuits
Filter
Designation
A
B
C
D
E
F
G
H
I
J
K
L
M
N
O
P
Q
R
S
T
Pi
5000 pF
2500 pF
1700 pF
1000 pF
820 pF
470 pF
135 pF
100 pF
68 pF
10 pF
4000 pF
2500 pF
1500 pF
1000 pF
820 pF
470 pF
135 pF
100 pF
68 pF ±20% 77 100V
100V
100V
100V
100V
100V
100V
100V
100V
100V
100V
100V
100V
100V
100V
100V
100V
50V
—
—
—
—
—
—
—
—
—
—
—
—1
7
12
14
16
23
27
—
1
5
13
18
20
22
29
34
3
6
10
19
24
26
29
35
38
10
14
16
25
30
32
36
38
42
16
19
20
27
33
35
37
40
46
—2
6
7
10
17
21
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
——
1
5
9
2
3
4
11
15
1
4
9
6
9
15
2
4
14
16
28
7
—
—
1
9
13
28
28
41
16
1
2
6
18
23
35
41
53
24
6
9
17
22
31
49
54
66
36
17
22
26
36
45
64
70
70
51
23
28
34
43
52
69
70
70
59
100V
53
23
11
6
5
3.5
1.3
.8
635
65
46
25
11
6
5
1.9
1.3
.7
±20%
±20%
±20%
±20%
±20%
±20%
±20%
±20%
±20%
±20%
+100/-0%
+100/-0%
+100/-0%
+100/-0%
+100/-0%
+100/-0%
+100/-0%
Max.
C
Insulated
Grounded
Insert
3 dB Max
Cut-off
Frequency
(MHz)*
——
—
—
—
—
—
—
—
—
—
—
—
—
API TECHNOLOGIES • 8061 Avonia Rd. • Fairview, PA 16415 • Ph: 814-474-1571 • Fax: 814-474-3110 • eis.apitech.com
API TECHNOLOGIES’ SPECTRUM CONTROL GmbH • Hansastrasse 6 • 91126 Schwabach, Germany • Phone: (49)-9122-795-0 • Fax: (49)-9122-795-58
Custom Filter Plates
Filter Plate Design Inquiry Form
FA18
General Information
Customer: Location:
Address:
City: State: Zip:
Contact: Title:
Phone: Fax:
Project Information
Functional Detail
NOTE: Bold lettering represents standard, readily available material (Circle the appropriate parameters needed)
Detailed Sketch and Comments Area
Project name: Annual usage: Target price:
Intended application: Quote quantity:
Function of circuit filter is used in: Target cost:
Include Mounting Detail
Lead Diameter
0.020" 0.025" 0.032" 0.040"
Base Plate Material
Brass UNS C26000/C27000 Cold Rolled Steel (CRS) UNS G10080/G10180 Aluminum UNS A93003/A96061 Beryllium Copper*
*
For Beryllium Copper, ask about our new “Easy Mate” Plate
Plating of Base Plate
Plate Thickness (± 0.002")
(0.010" for Easy Mate Jr.) (0.020" for Bolt-in) 0.026" 0.033" 0.041" Tin Silver 90/10 Solder Nickel
(0.012" for Easy Mate)
Center-to-Center Spacing Standard (inch): 0.079 0.100
(Not all capacitances available on all centers) Metric (mm): 2 2.54
Total Lead Length
0.700" 1.00" 1.102"
Lead Plating
Gold Tin Silver
Lead Material
Phosphor Bronze Copper
API TECHNOLOGIES • 8061 Avonia Rd. • Fairview, PA 16415 • Ph: 814-474-1571 • Fax: 814-474-3110 • eis.apitech.com
API TECHNOLOGIES’ SPECTRUM CONTROL GmbH • Hansastrasse 6 • 91126 Schwabach, Germany • Phone: (49)-9122-795-0 • Fax: (49)-9122-795-58
FA19
1.30
(33.1)
MAX.
.820
(20.9)
.758
(19.3)
TYPICAL
.187 (4.8)-A01
.250 (6.4)-A00
.032 (.8) THK.
FOR BOTH
®
Barrier Strip
Terminal Block
160 - Front panel mount
188 - Rear panel mount
Number
of Terminals
002 - 2 terminals through
006 - 6 terminals
Current
Rating
A- 20 Amps
For instructions on soldering to filter terminals, please refer to
page FA4 in filter plate section.
Special Terminations Code
Note: Leave blank if ordering
standard product.
Male quick disconnects
directly on terminal block.
A01 . . . . . . .187 (4.8)
A00 . . . . . . .250 (6.4)
52 – 160 – 006 – A A00
Dimensions
in inches (mm)
Ordering Information
Example: 52-160-006-A A00
The part number shown represents a barrier strip terminal block with
six terminals and rated for 20 Amps. Male disconnects (.250") are the
method of termination.
*
*Replace “–” with “F” for RoHS complaint version
Mechanical Specifications
Center Spacing. . . . . . . . .438" (11.1 mm)
Wire Size . . . . . . . . . . . . AWG #12 max for 20A
Screw Size . . . . . . . . . . . 20A - #6-32, zinc-plated
. . . . . . . . . . . . . . . . . . . philslot screws
Molded Material. . . . . . . Black, UL rated 94VO thermoplastic
Tightening Torque . . . . . 9 in.-lbs. max.
Terminal . . . . . . . . . . . . Brass, tin-plated
Electrical Specifications
Operating Temperature . . -55° C to 105° C
Working Voltage. . . . . . . 100VDC
Capacitance . . . . . . . . . . 2,500 pF to 5,200 pF
Dielectric
Withstanding Voltage . . . 1700VDC
Current Rating. . . . . . . . 20A
D.C. Resistance . . . . . . . .01 ohms max.
Barrier Strip
Filtered Terminal Blocks
The barrier strip filtered terminal block is designed to
provide excellent EMI/RFI filtering of AC and DC power
lines and control lines. This terminal block is available in
various sizes, with terminals for soldering or spade lugs.
Application examples include filtering power supplies
in telecommunications equipment, metering, industrial
controls, instrumentation and EDP equipment.
Features
■
UL recognized and CSA approved for DC voltages
■
E133076, UL 1059
■
LR92537, CSA STD 22.2 N°158-1987 and ECN584B
■
Filter element provides high insertion loss for EMI/RFI
filtering of AC and DC power and control lines
■
Rugged construction provides protection to filtering
element; especially useful for repeated changes in
wiring or field connections
■
2 to 6 terminals available (combine if larger number
of terminals needed)
■
Cost-effective solution for industrial interconnection
EMI filtering problems
■
Termination options available: straight lead, male or
female disconnects, pigtail (12 AWG = 0.081" (2.05mm);
22 AWG = 0.025" (0.64mm)
■
Available in RoHS compliant versions
Circuit Schematic
Pi Filter Frequency Insertion Loss (dB)
30 MHz 22
50 MHz 32
100 MHz 48
300 MHz 70
500 MHz 75
1000 MHz 75
Typical Loss (dB) In 50 Ohm Circuit
For custom designs see page FA18
and consult with factory.
API TECHNOLOGIES • 8061 Avonia Rd. • Fairview, PA 16415 • Ph: 814-474-1571 • Fax: 814-474-3110 • eis.apitech.com
API TECHNOLOGIES’ SPECTRUM CONTROL GmbH • Hansastrasse 6 • 91126 Schwabach, Germany • Phone: (49)-9122-795-0 • Fax: (49)-9122-795-58
Barrier Strip
Filtered Terminal Blocks
FA20
A
C
1.00
(25.4)
B .275
(7.0)
.212
(5.4)
(2X) .062 (1.6) X
.032 (.81)
D
.415
(10.5) .80
(20.3)
.75
(19.0)
#6-32UNC-2A THD
COMBO HEAD
SCREWS
.059
(1.5)
GROUND
PLANE
.100 (2.54)
4-40 THREADED
THRU GROUNDING
STANDOFF (2X)
Ø.312 TYP.
(7.9)
.032 (.81) TYP. .062
(1.6)
.65
(16.5)
Number of A B C
Part Number Circuits in. (mm) in. (mm) in. (mm)
a
52-160-002-A 2 1.71 (43.4) 1.31 (33.3) 1.02 (25.9)
52-160-003-A 3 2.15 (54.6) 1.75 (44.5) 1.46 (37.1)
52-160-004-A 4 2.59 (65.8) 2.19 (55.6) 1.90 (48.3)
52-160-005-A 5 3.02 (76.7) 2.62 (66.5) 2.32 (58.9)
52-160-006-A 6 3.46 (87.9) 3.06 (77.7) 2.77 (70.4)
Front panel mount
Rear panel mount
Number of A B C D
Part Number Circuits in. (mm) in. (mm) in. (mm) in. (mm)
52-188-002-A 2 1.31 (33.3) .438 (11.1) 1.86 (47.3) 1.02 (25.9)
52-188-003-A 3 1.75 (44.4) .875 (22.2) 2.30 (58.4) 1.46 (37.1)
52-188-004-A 4 2.19 (55.6) 1.313 (33.3) 2.74 (69.5) 1.90 (48.3)
52-188-005-A 5 2.62 (66.6) 1.750 (44.4) 3.17 (80.6) 2.32 (58.9)
52-188-006-A 6 3.06 (77.7) 2.188 (55.6) 3.61 (91.7) 2.77 (70.4)
20 Amps
20 Amps
Dimensions in inches (mm)
Dimensions in inches (mm)
a Also available through API’s authorized European distributors/agents.
API TECHNOLOGIES • 8061 Avonia Rd. • Fairview, PA 16415 • Ph: 814-474-1571 • Fax: 814-474-3110 • eis.apitech.com
API TECHNOLOGIES’ SPECTRUM CONTROL GmbH • Hansastrasse 6 • 91126 Schwabach, Germany • Phone: (49)-9122-795-0 • Fax: (49)-9122-795-58
250 Volt AC Rated
Filtered Terminal Blocks
FA21
Part Number Number of A B C
Circuits in. (mm) in. (mm) in. (mm)
52-257-002 2 1.71 (43.4) 1.31 (33.3) 1.02 (25.9)
52-257-003 3 2.15 (54.6) 1.75 (44.5) 1.46 (37.1)
52-257-004 4 2.59 (65.8) 2.19 (55.6) 1.90 (48.3)
52-257-005 5 3.02 (76.7) 2.62 (66.5) 2.32 (58.9)
52-257-006 6 3.46 (87.9) 3.06 (77.7) 2.77 (70.4)
Applications
n Metering equipment
n Programmable controllers
n Industrial process control
n Heavy equipment controls
n Power supplies
n Regulators
n Surge sensing equipment
n Power factor correction
n Telecommunications power management,
ATM, Sonet, etc.
n Medical equipment
API Technologies’ Spectrum Control line of filtered terminal
block provides superior EMI/RFI filtering of AC power and
control lines. This terminal block is available in various sizes,
with terminals for soldering, spade lugs, or wire pigtails.
Termination options available: straight lead male or female
disconnects, or wire pigtails in lengths to your specification.
Features
n
UL recognized and CSA approved for AC voltages.
n
E133076, UL 1059.
n
LR92537, CSA STD 22.2 N°158-1987 and ECN584B.
n
Termination options available: straight lead, male
or female disconnects, pigtail (12 AWG-22 AWG).
Specifications
ELECTRICAL
Operating Temperature: -55° C to +105° C
Voltage Rating: 250VAC
Current Rating: 20 Amps
Wire Range: 12-22AWG
Torque: 9 lb-in.
Capacitance: 2000pF to 5200pF
Dielectric
Withstanding Voltage: 1500VAC @ 25° C
MECHANICAL
Center Spacing: .438” (11.1 mm)
Wire Size: AWG #12 max. for 20 Amp
Screw Size:
20A - #6-32, zinc plated philslot
Molded Material: UL rated 94VO polyamide
Tightening Torque: 9 in.-lbs. max.
Terminal Options: straight lead, male or female
disconnects, pigtail
Dimensions in inches (mm)
API TECHNOLOGIES • 8061 Avonia Rd. • Fairview, PA 16415 • Ph: 814-474-1571 • Fax: 814-474-3110 • eis.apitech.com
API TECHNOLOGIES’ SPECTRUM CONTROL GmbH • Hansastrasse 6 • 91126 Schwabach, Germany • Phone: (49)-9122-795-0 • Fax: (49)-9122-795-58
FA24
Custom
Filtered Arrays
API Technologies’ Spectrum Control brand will custom
design a filter plate or terminal block that meets your size,
material and filtering requirements. We have engineered
a variety of capacitive only filter elements that provide
excellent RF isolation from 5 MHz to 1 GHz and beyond.
In addition, we are capable of providing stringent testing
and analysis of our filter plate or terminal block assemblies
to MIL-F-15733 and MIL-F-28861.
In addition to our standard and custom filter plates
and terminal blocks, we offer a number of value-added
features designed to complement your manufacturing
operation. Our marketing and engineering staff will
evaluate your design or manufacturing parameters and
develop a filter solution which provides increased filtering
performance economically.
API Capabilities
■
Custom assemblies with varying cable lengths
and terminations
■
Integrate a filter solution with other components
to ensure a completely functional device
■
Perform EMC evaluations on your equipment,
recommending proper placement of EMI/RFI
filtering components
■
Custom high reliability assemblies
Easy Mate
Patent pending
Bolt-in
Coining process
patented
Lead stabilizer
position can be
adjustable
Filtered Headers
Replace the unfiltered connector on your PC board with
API’s low cost filtered header. This innovative new product
allows you to meet EMC emissions and susceptibility
standards with minimal or no board change.
Flat Conductor Cables
Flat conductor cables are often selected as an effective
method of interconnection. API can save you time and
money by installing conductor cables to your filter plates.
Flat conductor cables are available in varying lengths,
conductor counts and in several termination configurations.
Lead Stabilizer
API Technologies’ Spectrum Control brand has developed
a filter plate lead stabilizer bar to protect leads during
installation and ensure proper alignment to PCB.
API TECHNOLOGIES • 8061 Avonia Rd. • Fairview, PA 16415 • Ph: 814-474-1571 • Fax: 814-474-3110 • eis.apitech.com
API TECHNOLOGIES’ SPECTRUM CONTROL GmbH • Hansastrasse 6 • 91126 Schwabach, Germany • Phone: (49)-9122-795-0 • Fax: (49)-9122-795-58
Custom Filtered
Terminal Blocks
Terminal Block Design Inquiry Form
FA25
API Technologies’ Spectrum Control brand can incorporate
EMI filters into a variety of terminal block designs. We offer
product variations from several terminal block manufacturers.
In addition to developing a filtering solution, we will add
custom wiring and terminations to meet your requirements.
API offers:
■
Unique package integration for customer
specific needs
■
Wide range of designs from numerous terminal
block manufacturers
■
Custom assemblies with varying cable lengths
and terminations
General Information
Customer: Location:
Address:
City: State: Zip:
Contact: Title:
Phone: Fax:
Project Information
Detailed Sketch and Comments Area
Project name: Annual usage: Target price:
Intended application: Quote quantity:
Function of circuit filter is used in: Target cost:
Terminal Block Design Inquiry Form