EMI Filtered Arrays our filter plates and terminal blocks provide exceptional EMI protection of signal and power lines at a lower total installed cost Easy Mate Filter Plates reduce installation time and overall cost with its patented snap-in design to maximize real estate on PCBs. The Easy Mate Jr. offers a lower profile for installation of feed-through filters into small hardware applications...FA3-FA8 Bolt-In Filter Plates provide EMI filtering for signal and power lines and an excellent method for electronic system interface. These plates eliminate the need to mount filters into bulkheads and are ideal for the isolation of electronic compartments to suppress EMI... FA9-FA12 Barrier Strip Filtered Terminal Blocks are available in 2 to 6 terminal versions and our filter elements provide high insertion loss for EMI/RFI filtering of AC and DC power and control lines...FA19-FA20 PCB Mount Filtered Terminal Blocks with 2 to 12 terminals available, they provide quick and easy PCB installation and maintenance with a filter element that delivers high insertion loss for EMI/RFI filtering of low voltage DC power and control lines...FA22-FA23 Custom Filtered Arrays help meet your design or manufacturing parameters through special mechanical and electrical specifications or by adding varying cable lengths and terminations for a complete turnkey assembly. Custom high reliability assemblies available...FA24 Advantages of a Filtered Array Provide an EMI filtered signal or power line between electronic system modules Reduce cost . . . economical method to meet EMC requirements Reduce labor . . . eliminate need to assemble filters into a bulkhead Outperform surface mount EMI filters at frequencies above 50 MHz Reduce risk of damage to filter elements due to thermal shock and installation Improve reliability . . . every filter plate is 100% tested for key parameters Maximize real estate on PCB Mixed schematics in a single filter plate package API TECHNOLOGIES * 8061 Avonia Rd. * Fairview, PA 16415 * Ph: 814-474-1571 * Fax: 814-474-3110 * eis.apitech.com API TECHNOLOGIES' SPECTRUM CONTROL GmbH * Hansastrasse 6 * 91126 Schwabach, Germany * Phone: (49)-9122-795-0 * Fax: (49)-9122-795-58 FA1 Filter Plates Eliminating EMI/RFI interference has become a stringently enforced matter and needs to be considered at the early stages of design for all electronic systems. Both internal and external interference sources have a major impact on the successful EMC performance of a new system. Shielding alone is unsatisfactory in shunting unwanted harmonics, conducted or radiated, on power/control lines that run through compartments of an electronic enclosure. This is particularly applicable in systems operating at frequencies above 50 MHz. Isolation and the incorporation of feed-through filters (Filter Plates) to facilitate entering or leaving sensitive compartments in an assembly are excellent methods to bring electronic interdependent functions/systems into compliance. Filter plates allow a means of interfacing voltage and/or data (controlling instructions) to distant areas of a system without compromising its performance. Filter plates provide excellent isolation from 5 MHz to 18 GHz and beyond, reduce the labor involved for installation, and reduce the risk of damaging filter elements during installation. Connecting to these filter plates is easily accomplished through several methods, including ribbon style connectors, harnesses, hard wiring or directly soldering leads at a 90 angle to the printed circuit board. The drawings on pages FA4, FA10 and FA14 illustrate how filter plates are incorporated into an electronic system. Easy Mate Plates Bolt-in Plates Custom Plate Solutions Filter Plate Advantages Provide an EMI filtered signal line between electronic system modules Reduce cost . . . economical method to meet EMC requirements Reduce labor . . . eliminate need to assemble filters into a bulkhead Outperform surface mount EMI filters at frequencies above 50 MHz Reduce risk of damage to filter elements due to thermal shock and installation Improve reliability . . . every filter plate is 100% tested for key parameters Maximize real estate on PCB Mixed schematics in a single filter plate package API TECHNOLOGIES * 8061 Avonia Rd. * Fairview, PA 16415 * Ph: 814-474-1571 * Fax: 814-474-3110 * eis.apitech.com API TECHNOLOGIES' SPECTRUM CONTROL GmbH * Hansastrasse 6 * 91126 Schwabach, Germany * Phone: (49)-9122-795-0 * Fax: (49)-9122-795-58 FA2 Easy Mate Filter Plates API's Spectrum Control brand developed an EMI/RFI filter plate, Easy Mate, which simplifies installation and eliminates the need for mounting hardware. The Easy Mate, patented, is designed to "snap" into the chassis of electronic systems, reducing the labor required to complete a plate installation. The drawing on page FA4 shows the Easy Mate design. These plates are available in two lengths and in both standard density centers (.100") and high-densitycenters (2mm). Standard density Easy Mate plates offer up to 26 lines per plate in a double row configuration, while highdensity plates offer up to 32 lines. Custom sizes for Easy Mate plates are available. Easy Mate Advantages Ordering Information Example: Reduces installation time and overall cost Eliminates mounting hardware and prepwork Flexibility for 1 or 2 rows and standard density centers (.100") or high density centers (2mm) Improves overall quality and reliability Multiple dimpled finger ground contacts provides excellent long term EMI filtering from 5 MHz to 18 GHz Outperforms surface mount devices Maximize real estate on PCB Mixed capacitance values and schematics Ideal for isolation of electronic compartments Available in RoHS compliant versions 52-898-206-BA2 The part number shown represents an Easy Mate filter plate with 2 rows, 6 filters per row. Filters are C style with a capacitance value of 100pF. The plate length is 1.092", and the leads are bent 90 to the right side. 52 -** 898 Filter Plates 898 Easy Mate Standard Density 960 Easy Mate Hi-density * 2 06 - No. of Filters No. of Rows 1 = 1 row 2 = 2 rows * Maximum capacitance up to 4000pF C style filter B Filter Designation Number of Lines per Row If less than 10, use a 0 (zero) first. **Replace "-" with "F" for RoHS complaint version A - T from table on page 118. *** A 2 Plate Length Lead Configuration A - 1.092 (27.74mm) B - 1.812 (46.02mm) 0 - Straight 1 - 90 (left) 2 - 90 (right) 3 - 90 (both) *** To request selective line filtering, a mechanical configuration or material specification not shown in this catalog, please complete and forward the design inquiry form on page FA18. We will review your request and provide you with a part number. API TECHNOLOGIES * 8061 Avonia Rd. * Fairview, PA 16415 * Ph: 814-474-1571 * Fax: 814-474-3110 * eis.apitech.com API TECHNOLOGIES' SPECTRUM CONTROL GmbH * Hansastrasse 6 * 91126 Schwabach, Germany * Phone: (49)-9122-795-0 * Fax: (49)-9122-795-58 FA3 Easy Mate Filter Plates Mechanical Specifications Base Plate Material ............................ Beryllium copper Patented Base Plate Thickness .......................... .012 inches (0.30mm) Plating .............................. Tin, Soldering to Filter Terminals Use a temperature controlled soldering iron with tip temperature of 525 10 F (275 5 C). Use an SN 63 RMA flux core solder. Make mechanical wire connection. Use heat sink next to filter body where possible. Clean soldering iron tip. Clip end of solder--remove 0.5" (12.7mm) to expose flux for soldering. Apply soldering iron to wire/flag junction at wetted solder tip region of iron (Wetted Bridge Method). Immediately apply solder. Dwell time for soldering iron tip on product should be 3-5 seconds maximum. (For non-RoHS versions only) RoHS version will be silver Lead Material ................. Copper alloy Lead Plating .................... Gold plate Lead Diameter ............... o .025" (.64mm) for 0.100" centers (2.54mm) o .020 (.51mm) for 0.079" centers (2.00mm) Current Rating ................ 5 Amps for .025" o (.64mm) 3 Amps for .020" o (.51mm) API TECHNOLOGIES * 8061 Avonia Rd. * Fairview, PA 16415 * Ph: 814-474-1571 * Fax: 814-474-3110 * eis.apitech.com API TECHNOLOGIES' SPECTRUM CONTROL GmbH * Hansastrasse 6 * 91126 Schwabach, Germany * Phone: (49)-9122-795-0 * Fax: (49)-9122-795-58 FA4 No. of Plate filtered lines length (A) per row Easy Mate Filter Plates Standard Density Centers .100" 1.092 (27.74) Dimensions: inches and (mm) Lead Spacing: .100" (2.54 mm) Single Row A B C .100 (2.54) .622 (15.80) .150 (3.81) .335 (8.51) Pin 1 1.812 (46.02) .150 (3.81) .118 (3.00) .118 (3.00) Straight (0) 90 Both (3) .374 (9.50) .315 (8.00) MAX. .315 (8.00) MAX. .675 (17.15) .540 (13.71) 1.102 (28.00) .315 (8.00) MAX. .374 (9.50) .481 (12.22) 0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 1.1 1.2 (0.00) (2.54) (5.08) (7.62) (10.16) (12.70) (15.24) (17.78) (20.32) (22.86) (25.40) (27.94) (30.48) 0.906 0.806 0.806 0.706 0.706 0.606 0.606 0.506 0.506 0.406 0.406 0.306 0.306 (23.01) (20.47) (20.47) (17.93) (17.93) (15.39) (15.39) (12.85) (12.85) (10.31) (10.31) (7.77) (7.77) .012 (.31) .100" Centers .057 (1.45) Chassis .312 (7.93) .062 (1.58) Board .150 (3.81) .118 (3.00) 90 Both (3) .315 (8.00) MAX. .540 (13.71) .118 (3.00) .315 (8.00) MAX. .381 (9.68) 1.02 (25.93) High-Density 90 Right (2) .394 (10.00) .406 (10.32) .012 (.31) 2mm Centers .294 .675 (7.47) (17.15) .875 (22.22) .306 (7.78) .675 (17.17) .875 (22.25) .118 (3.00) .474 (12.04).374 (9.50) .474 (12.05) .374 (9.51) .640 (16.26) .622 (15.80) .335 (8.51) .150 (3.81) .474 (12.04) .374 (9.50) 1 2 3 4 5 6 7 8 9 10 11 12 13 .265 (6.74) .100 (2.54) 90 Left (1) (12.60) (12.60) (10.06) (10.06) (7.52) (7.52) .186 (4.73) .100 (2.54) 1.102 (28.00) 0.496 0.496 0.396 0.396 0.296 0.296 Standard Density A B C .315 (8.00) MAX. 0 (0.00) 0.1 (2.54) 0.2 (5.08) 0.3 (7.62) 0.4 (10.16) 0.5 (12.70) Board mounted to .312 standoffs .294 (7.47) .850 (21.60) .921 (23.40) Straight (0) 1 2 3 4 5 6 Typical Mounting Applications .315 (8.00) MAX. .381 (9.68) Pin 1 C .118 (3.00) 90 Right (2) Double Row B .294 (7.47) .118 (3.00) 90 Left (1) .374 (9.50) 52-898-XXX-XXX Board mounted to .312 standoffs .453 (11.51) .186 (4.73) .374 (9.51) .118 (3.00) .474 .374 (12.04) (9.50) .315 (8.00) MAX. .294 (7.47) .640 (16.26) .265 (6.74) .394 (10.00) .950 (24.13) Patented Refers to lead configuration for part number/ordering information .057 (1.45) Chassis .312 (7.93) .062 (1.58) Board .675 (17.17) .833 (21.16) .306 (7.78) .385 (9.78) API TECHNOLOGIES * 8061 Avonia Rd. * Fairview, PA 16415 * Ph: 814-474-1571 * Fax: 814-474-3110 * eis.apitech.com API TECHNOLOGIES' SPECTRUM CONTROL GmbH * Hansastrasse 6 * 91126 Schwabach, Germany * Phone: (49)-9122-795-0 * Fax: (49)-9122-795-58 FA5 No. of Plate filtered lines length (A) per row Easy Mate Filter Plates Hi-Density Centers 2mm 1.092 (27.74) Dimensions: inches and (mm) Lead Spacing: .079" (2.00 mm) Single Row A B C .079 (2.00) .622 (15.80) .150 (3.81) .335 (8.51) Pin 1 .150 (3.81) .118 (3.00) .118 (3.00) Straight (0) 1.812 (46.02) 90 Both (3) .374 (9.50) .315 (8.00) MAX. .315 (8.00) MAX. .675 (17.15) .540 (13.71) 1.102 (28.00) .294 (7.47) .118 (3.00) .118 (3.00) 90 Left (1) 52-960-XXX-XXX B C 2 3 4 5 6 7 0.079 0.157 0.236 0.315 0.394 0.472 (2.00) (4.00) (6.00) (8.00) (10.00) (12.00) 0.463 0.463 0.385 0.385 0.306 0.306 (11.77) (11.77) (9.77) (9.77) (7.77) (7.77) 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 0.079 0.157 0.236 0.315 0.394 0.472 0.551 0.630 0.709 0.787 0.866 0.945 1.024 1.102 1.181 (2.00) (4.00) (6.00) (8.00) (10.00) (12.00) (14.00) (16.00) (18.00) (20.00) (22.00) (24.00) (26.00) (28.00) (30.00) 0.866 0.787 0.787 0.709 0.709 0.630 0.630 0.551 0.551 0.472 0.472 0.394 0.394 0.315 0.315 (22.00) (20.00) (20.00) (18.00) (18.00) (16.00) (16.00) (14.00) (14.00) (12.00) (12.00) (10.00) (10.00) (8.00) (8.00) 90 Right (2) Easy M ate Chassis Cut-out Design .374 (9.50) .315 (8.00) MAX. .315 (8.00) MAX. .381 (9.68) Patent Pending .294 (7.47) .850 (21.60) .921 (23.40) Double Row .374 (9.50) A B A B C .057 .002 (1.45 .05) .010 (.25) .470 (11.95) .670 (17.04) .079 (2.00) .079 (2.00) .622 (15.80) .335 (8.51) .150 (3.81) Pin 1 Straight (0) Housing thickness beyond output customer's option Casting .150 (3.81) .118 (3.00) 90 Both (3) .118 (3.00) A B .315 (8.00) MAX. (9.50) 1.102 (28.00) 90 Left (1) .540 (13.71) .118 (3.00) .474 (12.04) .374 (9.50) .481 (12.22) .315 (8.00) MAX. .453 (11.51).374 .315 (8.00) MAX. .381 (9.68) 1.02 (25.93) .010 (.25) .294 (7.47) .675 (17.15) .833 (21.60) 90 Right (2) .470 (11.95) .373 (9.47) .118 (3.00) .453 .374 (11.51) (9.50) .315 (8.00) MAX. .294 (7.47) .373 (9.47) Plate Length A B 1.092 (27.74) 1.812 (46.02) 1.117 (28.41) 1.837 (46.71) 0.816 (20.75) 1.535 (39.04) .930 (23.62) Patented Refers to lead configuration for part number/ordering information API TECHNOLOGIES * 8061 Avonia Rd. * Fairview, PA 16415 * Ph: 814-474-1571 * Fax: 814-474-3110 * eis.apitech.com API TECHNOLOGIES' SPECTRUM CONTROL GmbH * Hansastrasse 6 * 91126 Schwabach, Germany * Phone: (49)-9122-795-0 * Fax: (49)-9122-795-58 FA6 Easy Mate Jr. Filter Plates API's Spectrum Control brand has expanded its popular Easy Mate family by adding two more package sizes. These new sizes are lower profile and facilitate installation of feed-through filters into small hardware applications such as PCS linear power amplifiers and RF transmitters. The Easy Mate Jr. is available in two plate lengths, .990" and 1.240", and in standard (.100") and high density centers (2mm). Mechanical Specifications Base Plate Material ..........................Beryllium copper Easy Mate Jr. Advantages Reduces installation time and overall cost Base Plate Thickness .........................010 inches (.25mm) Eliminates mounting hardware and prepwork Increase flexibility with standard density centers (.100") or high density centers (2mm) Plating .............................Tin, Improves overall quality and reliability Lead Material ................Copper alloy Multiple finger ground contacts provide excellent EMI filtering from 5 MHz to 18 GHz Lead Plating ..................Gold plate Outperforms surface mount devices Lead Diameter..............o .025" (.64mm) Maximize real estate on PCB Mixed capacitance values and schematics Ideal for isolation of electronic compartments Available in RoHS compliant versions RoHS version will be silver for 0.100" centers (2.54mm) .......................................o .020 (.51mm) for 0.079" centers (2.00mm) Current Rating ..............5 Amps for .025" o (.64mm) 3 Amps for .020" o (.51mm) Ordering Information Example: 52-978-106-BA2 The part number shown represents an Easy Mate Jr. filter plate with 6 filters. Filters are C style with a capacitance value of 100pF. The plate length is .990", and the leads are bent 90 to the right side. 52 -** 978 Filter Plates 978 Easy Mate Jr. Standard Density 979 Easy Mate Jr. High-density * 1 06 - No. of Filters No. of Rows 1 = 1 row * Maximum capacitance up to 4000pF C style filter B Filter Designation Number of Lines per Row If less than 10, use a 0 (zero) first. **Replace "-" with "F" for RoHS complaint version A - T from table on page FA17. *** A 2 Plate Length Lead Configuration A - .990 (25.15mm) B - 1.240 (31.49mm) 0 - Straight 1 - 90 (left) 2 - 90 (right) 3 - 90 (both) *** To request selective line filtering, a mechanical configuration or material specification not shown in this catalog, please complete and forward the design inquiry form on page FA18. We will review your request and provide you with a part number. API TECHNOLOGIES * 8061 Avonia Rd. * Fairview, PA 16415 * Ph: 814-474-1571 * Fax: 814-474-3110 * eis.apitech.com API TECHNOLOGIES' SPECTRUM CONTROL GmbH * Hansastrasse 6 * 91126 Schwabach, Germany * Phone: (49)-9122-795-0 * Fax: (49)-9122-795-58 FA7 Standard Density Centers .100" (D) Easy Mate Jr. Filter Plates A B C D .090 (2.29) .180 .260 (4.57) (6.60) 1.24 (31.49) .090 (2.29) Straight (0) Double Bends (3) .118 (3.00) .284 (7.21) .315 (8.00) MAX. .118 (3.00) .420 (10.67) 90 Left (1) .284 (7.21) 90 Right (2) (2.54) (5.08) (7.62) (10.16) (12.70) (15.24) 0.395 0.395 0.295 0.295 0.195 0.195 (10.03) (10.03) (7.49) (7.49) (4.95) (4.95) 2 3 4 5 6 7 8 9 10 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 (2.54) (5.08) (7.62) (10.16) (12.70) (15.24) (17.78) (20.32) (22.86) 0.570 0.470 0.470 0.370 0.370 0.270 0.270 0.170 0.170 (14.48) (11.94) (11.94) (9.40) (9.40) (6.86) (6.86) (4.32) (4.32) .284 (7.21) 0.417 0.417 0.338 0.338 0.259 0.259 (10.58) (10.58) (8.58) (8.58) (6.58) (6.58) 2 3 4 5 6 7 8 9 10 0.079 0.157 0.236 0.315 0.394 0.472 0.551 0.630 0.709 (2.00) (4.00) (6.00) (8.00) (10.00) (12.00) (14.00) (16.00) (18.00) 0.580 0.502 0.502 0.423 0.423 0.344 0.344 0.266 0.266 (14.75) (12.75) (12.75) (10.75) (10.75) (8.75) (8.75) (6.75) (6.75) .990 (25.15) Refers to lead configuration for part number/ordering information 1.24 (31.49) Typical Mounting Application .675 (17.16) .010 (.25) .296 (7.52) .090 (2.29) .284 (7.22) .265 (6.74) C (2.00) (4.00) (6.00) (8.00) (10.00) (12.00) .725 (18.41) .798 (20.27) B 0.079 0.157 0.236 0.315 0.394 0.472 .296 (7.52) .379 (9.63) 52-979-XXX-XXX 2 3 4 5 6 7 .118 (3.00) .315 (8.00) MAX. .315 (8.00) MAX. C 0.1 0.2 0.3 0.4 0.5 0.6 No. of Plate filtered lines length (A) per row .296 (7.52) .675 (17.15) .118 (3.00) B High Density Centers 2mm (D) .315 (8.00) MAX. .850 (21.59) 52-978-XXX-XXX 2 3 4 5 6 7 .990 (25.15) Dimensions: inches and (mm) Single Row No. of Plate filtered lines length (A) per row Easy Mate Jr. Chassis Cut-out Design Patented A B .008 (.20) .062 (1.58) Board .640 (16.27) .313 (7.96) .046 .002 (1.17 .05) .173 (4.40) .312 (7.93) 2 draft per side Casting R.062 (4X) (1.58) .057 (1.45) Chassis .008 (.20) R.015 MAX. (.38) A B >.057 (1.45) Optional thickness by customer .173 (4.40) .057 Thick R.010 MAX. (.25) Plate Length A B .990 (25.15) 1.24 (31.49) 1.015 (25.78) 1.265 (32.13) 0.834 (21.18) 1.084 (27.53) API TECHNOLOGIES * 8061 Avonia Rd. * Fairview, PA 16415 * Ph: 814-474-1571 * Fax: 814-474-3110 * eis.apitech.com API TECHNOLOGIES' SPECTRUM CONTROL GmbH * Hansastrasse 6 * 91126 Schwabach, Germany * Phone: (49)-9122-795-0 * Fax: (49)-9122-795-58 FA8 Bolt-in Style Filter Plates The Bolt-in style plate provides an excellent method for electronic system interface and EMI filtering. Bolt-in filter plates are available in a variety of plate sizes and up to 74 lines per plate in high-density (2mm) and 60 pins per plate in standard density (.100"). On the larger plate sizes, API ensures structural integrity through a unique, patent pending, coining process. The drawing on page FA10 shows an electronic system utilizing Bolt-in style filter plates. Bolt-in Filter Plate Advantages Ordering Information Example: Eliminates the need to assemble filters into a bulkhead Excellent filtering from 5 MHz to 1 GHz Total cost savings vs. customer installed discrete filter elements Ideal for isolation of electronic compartments to suppress EMI Outperforms surface mount filters over 50 MHz Improved reliability Mixed capacitance values and schematics Maximize real estate on PCB Available in RoHS compliant versions 52-970-208-BB2 The part number shown represents a Bolt-in style filter plate with 2 rows, 8 filters per row. Filters are C style with a capacitance value of 100pF. The plate length is 1.560", and the leads are bent 90 to the right side. 52 -** 970 Filter Plates 970 Bolt-in Standard Density 971 Bolt-in High Density * 2 08 - No. of Filters No. of Rows 1 = 1 row 2 = 2 rows * Maximum capacitance up to 4000pF C style filter B Filter Designation Number of Lines per Row If less than 10, use a 0 (zero) first. **Replace "-" with "F" for RoHS complaint version A - T from table on page FA17. *** B 2 Plate Length Lead Configuration A - 1.060 (26.92mm) B - 1.560 (39.62mm) C - 2.560 (65.02mm) D - 3.560 (90.42mm) 0 - Straight 1 - 90 (left) 2 - 90 (right) 3 - 90 (both) *** To request selective line filtering, a mechanical configuration or material specification not shown in this catalog, please complete and forward the design inquiry form on page FA18. We will review your request and provide you with a part number. API TECHNOLOGIES * 8061 Avonia Rd. * Fairview, PA 16415 * Ph: 814-474-1571 * Fax: 814-474-3110 * eis.apitech.com API TECHNOLOGIES' SPECTRUM CONTROL GmbH * Hansastrasse 6 * 91126 Schwabach, Germany * Phone: (49)-9122-795-0 * Fax: (49)-9122-795-58 FA9 Bolt-in Style Filter Plates Coining feature Patented Mechanical Specifications Base Plate Material .......................... Brass UNS C26000/C27000 Base Plate Thickness ........................ .020 inches (.51mm) Plating ............................ Tin, RoHS version will be silver Lead Material ............... Copper alloy Lead Plating .................. Gold plate Lead Diameter ............. o .025" (.64mm) for 0.100" centers (2.54mm) ....................................... o .020 (.51mm) for 0.079" centers (2.00mm) Current Rating .............. 5 Amps for .025" (.64mm) o 3 Amps for .020" (.51mm) o API TECHNOLOGIES * 8061 Avonia Rd. * Fairview, PA 16415 * Ph: 814-474-1571 * Fax: 814-474-3110 * eis.apitech.com API TECHNOLOGIES' SPECTRUM CONTROL GmbH * Hansastrasse 6 * 91126 Schwabach, Germany * Phone: (49)-9122-795-0 * Fax: (49)-9122-795-58 FA10 Bolt-in Style Filter Plates No. of Plate filtered lines length (A) per row Standard Density Centers .100" (0.00) (2.54) (5.08) (7.62) (10.16) 0.53 (13.46) 0.43 (10.92) 0.43 (10.92) 0.33 (8.38) 0.33 (8.38) 1.560 * (39.62) 1 2 3 4 5 6 7 8 9 10 0.0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 (0.00) (2.54) (5.08) (7.62) (10.16) (12.70) (15.24) (17.78) (20.32) (22.86) 0.73 0.73 0.63 0.63 0.53 0.53 0.43 0.43 0.33 0.33 (18.54) (18.54) (16.00) (16.00) (13.46) (13.46) (10.92) (10.92) (8.38) (8.38) 2.560 (65.02) 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 0.4 (10.16) 0.5 (12.70) 0.6 (15.24) 0.7 (17.78) 0.8 (20.32) 0.9 (22.86) 1.0 (25.40) 1.1 (27.94) 1.2 (30.48) 1.3 (33.02) 1.4 (35.56) 1.5 (38.10) 1.6 (40.64) 1.7 (43.18) 1.8 (45.72) 1.9 (48.26) 1.03 1.03 0.93 0.93 0.83 0.83 0.73 0.73 0.63 0.63 0.53 0.53 0.43 0.43 0.33 0.33 (26.16) (26.16) (23.62) (23.62) (21.08) (21.08) (18.54) (18.54) (16.00) (16.00) (13.46) (13.46) (10.92) (10.92) (8.38) (8.38) 3.560 (90.42) 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 1.2 1.3 1.4 1.5 1.6 1.7 1.8 1.9 2.0 2.1 2.2 2.3 2.4 2.5 2.6 2.7 2.8 2.9 (30.48) (33.02) (35.56) (38.10) (40.64) (43.18) (45.72) (48.26) (50.80) (53.34) (55.88) (58.42) (60.96) (63.50) (66.04) (68.58) (71.12) (73.66) 1.13 1.13 1.03 1.03 0.93 0.93 0.83 0.83 0.73 0.73 0.63 0.63 0.53 0.53 0.43 0.43 0.33 0.33 (27.70) (27.70) (26.16) (26.16) (23.62) (23.62) (21.08) (21.08) (18.54) (18.54) (16.00) (16.00) (13.46) (13.46) (10.92) (10.92) (8.38) (8.38) A A-.200 B .250 (6.35) .500 (12.70) O .120 x2 Pin 1 .100 (2.54) C Straight (0) .020 (.51) .300 (7.62) .020 (.51) 1.102 (28.00) 90 Left (1) .020 (.51) 90 Both (3) .300 (7.62) .315 (8.00) MAX. .315 (8.00) MAX. .538 (13.71) .020 (.51) .290 (7.37) .675 (17.15) (.51) .300 (7.62) .300 (7.62) .315 (8.00) MAX. .020 .290 (.51) (7.37) .850 (21.60) .315 (8.00) MAX. .374 (9.50) .020 (.51) .385 (9.78) .921 (23.40) Double Row .100 (2.54) .500 (12.70) .100 (2.54) .100 (2.54) .250 (6.35) O .120 x2 .100 (2.54) C .020 (.51) .200 (5.08) .315 (8.00) MAX. .538 .020 (.51) (13.71) 1.102 (28.00) 90 Both (3) .020 (.51) .315 (8.00) MAX. .675 (17.15) .200 (5.08) .020 (.51) .290 (7.37) .875 (22.22) 90 Left (1) .020 (.51) .315 (8.00) MAX. .020 (.51) .385 .485 (9.78) (12.32) 1.02 (25.93) .474 (12.07) .390 (9.90) 90 Right (2) .020 (.51) .200 (5.08) .200 (5.08) .474 (12.07) .374 (9.50) A A-.200 B Pin 1 Straight (0) .374 (9.50) 90 Right .020 (2) .020 (.51) .315 (8.00) MAX. .020 (.51) .474 (12.07) .290 (7.37) .950 (24.13) .390 (9.90) Coining feature patented Refers to lead configuration for part number/ordering information C 0 0.1 0.2 0.3 0.4 Dimensions: inches and (mm) Lead Spacing: .100" (2.54 mm) .100 (2.54) B 1 2 3 4 5 1.060 * (26.92) Single Row 52-970-XXX-XXX * For plate widths 1.060 and 1.560 there will be no coining. For these plates, increase dimensions to the right .020". Thus, any dimension on left will be reduced by .020. API TECHNOLOGIES * 8061 Avonia Rd. * Fairview, PA 16415 * Ph: 814-474-1571 * Fax: 814-474-3110 * eis.apitech.com API TECHNOLOGIES' SPECTRUM CONTROL GmbH * Hansastrasse 6 * 91126 Schwabach, Germany * Phone: (49)-9122-795-0 * Fax: (49)-9122-795-58 FA11 Bolt-in Style Filter Plates No. of Plate filtered lines length (A) per row High-Density Centers 2mm (2.00) (4.00) (6.00) (8.00) (10.00) 0.487 0.409 0.409 0.330 0.330 (12.38) (10.38) (10.38) (8.38) (8.38) 1.560 * (39.62) 3 4 5 6 7 8 9 10 11 12 0.157 0.236 0.315 0.394 0.472 0.551 0.630 0.709 0.787 0.866 (4.00) (6.00) (8.00) (10.00) (12.00) (14.00) (16.00) (18.00) (20.00) (22.00) 0.662 0.662 0.583 0.583 0.504 0.504 0.426 0.426 0.347 0.347 (16.81) (16.81) (14.81) (14.81) (12.81) (12.81) (10.81) (10.81) (8.81) (8.81) 2.560 (65.02) 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 0.709 0.787 0.866 0.945 1.024 1.102 1.181 1.260 1.339 1.417 1.496 1.575 1.654 1.732 1.811 1.890 (18.00) (20.00) (22.00) (24.00) (26.00) (28.00) (30.00) (32.00) (34.00) (36.00) (38.00) (40.00) (42.00) (44.00) (46.00) (48.00) 0.886 0.886 0.807 0.807 0.729 0.729 0.650 0.650 0.571 0.571 0.492 0.492 0.414 0.414 0.335 0.335 (22.51) (22.51) (20.51) (20.51) (18.51) (18.51) (16.51) (16.51) (14.51) (14.51) (12.51) (12.51) (10.51) (10.51) (8.51) (8.51) 3.560 (90.42) 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 1.496 1.575 1.654 1.732 1.811 1.890 1.969 2.047 2.126 2.205 2.283 2.362 2.441 2.520 2.598 2.677 2.756 2.835 (38.00) (40.00) (42.00) (44.00) (46.00) (48.00) (50.00) (52.00) (54.00) (56.00) (58.00) (60.00) (62.00) (64.00) (66.00) (68.00) (70.00) (72.00) 0.993 0.993 0.914 0.914 0.835 0.835 0.757 0.757 0.678 0.678 0.599 0.599 0.520 0.520 0.442 0.442 0.363 0.363 (25.22) (25.22) (23.22) (23.22) (21.22) (21.22) (19.22) (19.22) (17.22) (17.22) (15.22) (15.22) (13.22) (13.22) (11.22) (11.22) (9.22) (9.22) A A-.200 B .250 (6.35) .500 (12.70) O .120 x2 Pin 1 .079 (2.00) C Straight (0) .020 (.51) .289 (7.34) .020 (.51) 1.102 (28.00) 90 Left (1) .020 (.51) 90 Both (3) .289 (7.34) .315 (8.00) MAX. .315 (8.00) MAX. .538 (13.71) .020 (.51) .290 (7.37) .675 (17.15) (.51) .289 (7.34) .289 (7.34) .315 (8.00) MAX. .020 .290 (.51) (7.37) .850 (21.60) .315 (8.00) MAX. .374 (9.50) .020 (.51) .385 (9.78) .921 (23.40) Double Row .100 (2.54) .500 (12.70) .079 (2.00) .079 (2.00) .250 (6.35) O .120 x2 .079 (2.00) C .020 (.51) .210 (5.33) .315 (8.00) MAX. .538 .020 (.51) (13.71) 1.102 (28.00) 90 Both (3) .020 (.51) .315 (8.00) MAX. .675 (17.15) .210 (5.33) .020 (.51) .290 (7.37) .833 (21.16) 90 Left (1) .020 (.51) .315 (8.00) MAX. .020 (.51) .385 .464 (9.78) (11.79) 1.000 (25.40) .453 (11.51) .369 (9.37) 90 Right (2) .020 (.51) .210 (5.33) .210 (5.33) .453 (11.51) .374 (9.50) A A-.200 B Pin 1 Straight (0) .374 (9.50) 90 Right .020 (2) .020 (.51) .315 (8.00) MAX. .020 (.51) .453 (11.51) .290 (7.37) .930 (23.62) .369 (9.37) Coining feature patented Refers to lead configuration for part number/ordering information C 0.079 0.157 0.236 0.315 0.394 Dimensions: inches and (mm) Lead Spacing: .079" (2.00 mm) .100 (2.54) B 2 3 4 5 6 1.060 * (26.92) Single Row 52-971-XXX-XXX * For plate widths 1.060 and 1.560 there will be no coining. For these plates, increase dimensions to the right .020". Thus, any dimension on left will be reduced by .020. API TECHNOLOGIES * 8061 Avonia Rd. * Fairview, PA 16415 * Ph: 814-474-1571 * Fax: 814-474-3110 * eis.apitech.com API TECHNOLOGIES' SPECTRUM CONTROL GmbH * Hansastrasse 6 * 91126 Schwabach, Germany * Phone: (49)-9122-795-0 * Fax: (49)-9122-795-58 FA12 Custom Filter Plates High Volume Industrial As a long-term producer of filter plates for industrial applications, API Technologies understands the cost requirements of this market. In turn, we have established a program to develop and manufacture custom designed filter plates for cost sensitive industrial applications. We have engineered a variety of capacitive only filter elements that provide excellent RF isolation from 5 MHz to 1 GHz and beyond. To determine the available capacitance values, contact API. Our technical staff will work with you to develop a solution that meets your system and budget needs. Military/High Reliability Improving the electromagnetic compliance (EMC) of electronic systems is an area of intense focus within the defense and avionics industries. To achieve this goal, many companies are replacing discrete filter elements and surface mount filters with feed-through filter plate assemblies for higher frequency isolation. API will custom design a filter plate that meets your size, material and filtering requirements. We are capable of providing stringent testing and analysis of our filter plate assemblies to MIL-F-15733 and MIL-F-28861. API TECHNOLOGIES * 8061 Avonia Rd. * Fairview, PA 16415 * Ph: 814-474-1571 * Fax: 814-474-3110 * eis.apitech.com API TECHNOLOGIES' SPECTRUM CONTROL GmbH * Hansastrasse 6 * 91126 Schwabach, Germany * Phone: (49)-9122-795-0 * Fax: (49)-9122-795-58 FA15 Custom Capabilities In addition to our custom filter plates, API Technologies' Spectrum Control brand offers a number of value-added features designed to complement your manufacturing operation. Our marketing and engineering staff will evaluate your design or manufacturing parameters and develop a filter solution which provides increased filtering performance economically. API Capabilities Custom assemblies with varying cable lengths and impedances for high clock speeds associated with digital electronics Integrate a filter solution with other components to ensure a completely functional device Perform EMC evaluations on your equipment, recommending proper placement of EMI/RFI filtering components Filtered Headers Replace the unfiltered connector on your PC board with API's low cost filtered header. This innovative new product allows you to meet EMC emissions and susceptibility standards with minimal or no board change. Filtered Headers Flat Conductor Cables Flat conductor cables are often selected as an effective method of interconnection. API can save you time and money by installing conductor cables to your filter plates. Flat conductor cables are available in varying lengths, conductor counts, and in several termination configurations. Easy Mate .250 (6.36) MIN. X Lead Stabilizer API has developed a filter plate lead stabilizer bar to protect leads during installation and ensure proper alignment to PCB. .300 (7.63) Bolt-in Coining process patented .098 (2.49) .540 (13.73) .100 (2.54) .062 (1.58) .003 (.08) L 100 (2.54) A Lead stabilizer position can be adjustable API TECHNOLOGIES * 8061 Avonia Rd. * Fairview, PA 16415 * Ph: 814-474-1571 * Fax: 814-474-3110 * eis.apitech.com API TECHNOLOGIES' SPECTRUM CONTROL GmbH * Hansastrasse 6 * 91126 Schwabach, Germany * Phone: (49)-9122-795-0 * Fax: (49)-9122-795-58 FA16 Typical Insertion Loss 100 80 Insertion Loss (dB) Filter Selection EMI Filter Performance C-Style Capacitor I H 60 G F 40 A 20 The electrical characteristics table and insertion loss graphs indicate the performance of feed-through capacitors and Pi type filters. Utilize this information to specify the EMI filtering components included in your filter plate. B C 0 E 0.1MHz 1MHz 10MHz 100MHz Frequency D 1GHz) 10GHz 100 T Custom Filtering API Technologies' Spectrum Control line of filter plates are engineered to accommodate selective line filtering. Several different types of filters may be specified in a single, easy to install filter plate, allowing you to facilitate a wide range of filtering requirements. For selective line filtering, provide a sketch indicating the filters and positions required. The example below represents a 10 pin, 2 row plate with six 1000 pF feedthrough capacitors and four 1700 pF Pi type filters. Part Number Based on front view of plate 10 F F F R R 6 1 F F F R R 5 Filter** Circuits Value S Pi Capacitor R 60 Q 40 L M N 20 O P 0 0.1MHz 1MHz 10MHz 100MHz Frequency 1GHz 10GHz Above curves represent application of proper grounding fundamentals, for assistance consult with API. Minimum Insertion Loss - Decibels (dB) 50 ohm system per MIL-STD-220 (no load) Tolerance 3 dB Max Cut-off Frequency (MHz)* Working Voltage DC -55C to +125C 5 MHz 10 MHz 20 MHz 50 MHz 100 MHz 200 MHz 500 MHz 1 GHz Capacitance Filter Designation Insertion Loss (dB) 80 A 68 pF 20% 77 100V -- -- -- -- -- 3 10 16 B 100 pF 20% 53 100V -- -- -- -- 1 6 14 19 C 135 pF +100/-0% 23 100V -- -- -- 1 5 10 16 20 D 470 pF 20% 11 100V -- -- 2 7 13 19 25 27 820 pF 20% 6 100V -- 2 6 12 18 24 30 33 F 1000 pF 20% 5 100V -- 3 7 14 20 26 32 35 G 1500 pF 20% 3.5 100V 1 4 10 16 22 29 36 37 H 2500 pF +100/-0% 1.3 100V 5 11 17 23 29 35 38 40 I 4000 pF +100/-0% .8 100V 9 15 21 27 34 38 42 46 Max. 635 100V -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 1 6 17 23 2 9 22 28 E C J Insulated K Grounded Insert 10 pF 68 pF 20% 65 M 100 pF 20% 46 100V -- -- -- -- N 135 pF +100/-0% 25 100V -- -- -- 1 6 17 26 34 O 470 pF 20% 11 100V -- -- -- 9 18 22 36 43 L 100V 820 pF 20% 6 100V -- -- 4 13 23 31 45 52 Q 1000 pF 20% 5 100V -- 2 7 16 24 36 51 59 R 1700 pF +100/-0% 1.9 100V 1 6 14 28 35 49 64 69 S 2500 pF +100/-0% 1.3 50V 4 9 16 28 41 54 70 70 T 5000 pF +100/-0% .7 100V 9 15 28 41 53 66 70 70 P Pi * 3 dB cut-off frequency calculated at the maximum capacitance. ** For Hi-Density centers (2 mm) only C style filters are available, to a maximum of 4000pF. All high density capacitors are 50 volts @ 125C. API TECHNOLOGIES * 8061 Avonia Rd. * Fairview, PA 16415 * Ph: 814-474-1571 * Fax: 814-474-3110 * eis.apitech.com API TECHNOLOGIES' SPECTRUM CONTROL GmbH * Hansastrasse 6 * 91126 Schwabach, Germany * Phone: (49)-9122-795-0 * Fax: (49)-9122-795-58 FA17 Custom Filter Plates Filter Plate Design Inquiry Form General Information Customer: Location: Address: City: State: Contact: Title: Phone: Fax: Zip: Project Information Project name: Annual usage: Target price: Intended application: Quote quantity: Function of circuit filter is used in: Target cost: Functional Detail NOTE: Bold lettering represents standard, readily available material (Circle the appropriate parameters needed) Lead Diameter 0.020" 0.025" 0.032" Total Lead Length 0.040" 0.700" 1.00" 1.102" Lead Material Phosphor Bronze Lead Plating Copper Gold Tin Silver Base Plate Material Brass UNS C26000/C27000 Cold Rolled Steel (CRS) UNS G10080/G10180 Aluminum UNS A93003/A96061 Beryllium Copper* * For Beryllium Copper, ask about our new "Easy Mate" Plate Plate Thickness ( 0.002") (0.010" for Easy Mate Jr.) (0.020" for Bolt-in) 0.026" (0.012" for Easy Mate) Center-to-Center Spacing (Not all capacitances available on all centers) Plating of Base Plate 0.033" 0.041" Tin Silver 90/10 Solder Standard (inch): 0.079 0.100 Metric (mm): 2 2.54 Nickel Detailed Sketch and Comments Area Include Mounting Detail API TECHNOLOGIES * 8061 Avonia Rd. * Fairview, PA 16415 * Ph: 814-474-1571 * Fax: 814-474-3110 * eis.apitech.com API TECHNOLOGIES' SPECTRUM CONTROL GmbH * Hansastrasse 6 * 91126 Schwabach, Germany * Phone: (49)-9122-795-0 * Fax: (49)-9122-795-58 FA18 Barrier Strip Filtered Terminal Blocks The barrier strip filtered terminal block is designed to provide excellent EMI/RFI filtering of AC and DC power lines and control lines. This terminal block is available in various sizes, with terminals for soldering or spade lugs. Application examples include filtering power supplies in telecommunications equipment, metering, industrial controls, instrumentation and EDP equipment. Mechanical Specifications Center Spacing. . . . . . . . .438" (11.1 mm) Features Wire Size . . . . . . . . . . . . AWG #12 max for 20A UL recognized and CSA approved for DC voltages E133076, UL 1059 Screw Size . . . . . . . . . . . 20A - #6-32, zinc-plated . . . . . . . . . . . . . . . . . . . philslot screws LR92537, CSA STD 22.2 N158-1987 and ECN584B Molded Material. . . . . . . Black, UL rated 94VO thermoplastic Filter element provides high insertion loss for EMI/RFI filtering of AC and DC power and control lines Tightening Torque . . . . . 9 in.-lbs. max. Rugged construction provides protection to filtering element; especially useful for repeated changes in wiring or field connections Electrical Specifications 2 to 6 terminals available (combine if larger number of terminals needed) Working Voltage. . . . . . . 100VDC Cost-effective solution for industrial interconnection EMI filtering problems Termination options available: straight lead, male or female disconnects, pigtail (12 AWG = 0.081" (2.05mm); 22 AWG = 0.025" (0.64mm) Terminal . . . . . . . . . . . . Brass, tin-plated Operating Temperature . . -55 C to 105 C Capacitance . . . . . . . . . . 2,500 pF to 5,200 pF Dielectric Withstanding Voltage . . . 1700VDC Current Rating. . . . . . . . 20A D.C. Resistance . . . . . . . .01 ohms max. Available in RoHS compliant versions Typical Loss (dB) In 50 Ohm Circuit Circuit Schematic Pi Filter Ordering Information Example: 52-160-006-A A00 Frequency Insertion Loss (dB) 30 MHz 22 50 MHz 32 100 MHz 48 300 MHz 70 500 MHz 75 1000 MHz 75 The part number shown represents a barrier strip terminal block with six terminals and rated for 20 Amps. Male disconnects (.250") are the method of termination. 52 -* 160 - 006 - A Barrier Strip Terminal Block 160 - Front panel mount Number Current of Terminals Rating 002 - 2 terminals through A - 20 Amps 188 - Rear panel mount 006 - 6 terminals For instructions on soldering to filter terminals, please refer to page FA4 in filter plate section. * Replace "-" with "F" for RoHS complaint version A00 Dimensions in inches (mm) Special Terminations Code Note: Leave blank if ordering standard product. Male quick disconnects directly on terminal block. A01 . . . . . . .187 (4.8) A00 . . . . . . .250 (6.4) .758 (19.3) (R) .820 (20.9) 1.30 (33.1) MAX. TYPICAL .187 (4.8)-A01 .250 (6.4)-A00 .032 (.8) THK. FOR BOTH For custom designs see page FA18 and consult with factory. API TECHNOLOGIES * 8061 Avonia Rd. * Fairview, PA 16415 * Ph: 814-474-1571 * Fax: 814-474-3110 * eis.apitech.com API TECHNOLOGIES' SPECTRUM CONTROL GmbH * Hansastrasse 6 * 91126 Schwabach, Germany * Phone: (49)-9122-795-0 * Fax: (49)-9122-795-58 FA19 Barrier Strip Filtered Terminal Blocks Front panel mount 20 Amps Part Number a a Dimensions in inches (mm) Number of A B C Circuits in. (mm) in. (mm) in.(mm) 52-160-002-A 2 1.71(43.4) 1.31 (33.3) 1.02 (25.9) 52-160-003-A 3 2.15(54.6) 1.75 (44.5) 1.46 (37.1) 52-160-004-A 4 2.59(65.8) 2.19 (55.6) 1.90 (48.3) 52-160-005-A 5 3.02(76.7) 2.62 (66.5) 2.32 (58.9) 52-160-006-A 6 3.46(87.9) 3.06 (77.7) 2.77 (70.4) Also available through API's authorized European distributors/agents. Rear panel mount D .275 (7.0) #6-32UNC-2A THD COMBO HEAD SCREWS B .059 (1.5) 1.00 (25.4) .212 (5.4) (2X) .75 (19.0) .415 (10.5) GROUND PLANE .062 (1.6) X .032 (.81) A C .65 (16.5) .100 (2.54) 4-40 THREADED THRU GROUNDING STANDOFF (2X) O.312 TYP. (7.9) .032 (.81) TYP. .062 (1.6) Dimensions in inches (mm) 20 Amps Part Number .80 (20.3) Number ofAB CD Circuits in. (mm) in.(mm) in. (mm) in. (mm) 52-188-002-A 2 1.31 (33.3) .438 (11.1) 1.86 (47.3) 1.02(25.9) 52-188-003-A 3 1.75 (44.4) .875 (22.2) 2.30 (58.4) 1.46(37.1) 52-188-004-A 4 2.19 (55.6) 1.313 (33.3) 2.74 (69.5) 1.90(48.3) 52-188-005-A 5 2.62 (66.6) 1.750 (44.4) 3.17 (80.6) 2.32(58.9) 52-188-006-A 6 3.06 (77.7) 2.188 (55.6) 3.61 (91.7) 2.77(70.4) API TECHNOLOGIES * 8061 Avonia Rd. * Fairview, PA 16415 * Ph: 814-474-1571 * Fax: 814-474-3110 * eis.apitech.com API TECHNOLOGIES' SPECTRUM CONTROL GmbH * Hansastrasse 6 * 91126 Schwabach, Germany * Phone: (49)-9122-795-0 * Fax: (49)-9122-795-58 FA20 250 Volt AC Rated Filtered Terminal Blocks API Technologies' Spectrum Control line of filtered terminal block provides superior EMI/RFI filtering of AC power and control lines. This terminal block is available in various sizes, with terminals for soldering, spade lugs, or wire pigtails. Termination options available: straight lead male or female disconnects, or wire pigtails in lengths to your specification. Features n n n n Applications n UL recognized and CSA approved for AC voltages. E133076, UL 1059. LR92537, CSA STD 22.2 N158-1987 and ECN584B. Termination options available: straight lead, male or female disconnects, pigtail (12 AWG-22 AWG). n n n n n n n n n Metering equipment Programmable controllers Industrial process control Heavy equipment controls Power supplies Regulators Surge sensing equipment Power factor correction Telecommunications power management, ATM, Sonet, etc. Medical equipment Specifications ELECTRICAL Operating Temperature: Voltage Rating: Current Rating: Wire Range: Torque: Capacitance: Dielectric Withstanding Voltage: MECHANICAL Center Spacing: Wire Size: Screw Size: Molded Material: Tightening Torque: Terminal Options: Part Number -55 C to +105 C 250VAC 20 Amps 12-22AWG 9 lb-in. 2000pF to 5200pF 1500VAC @ 25 C .438" (11.1 mm) AWG #12 max. for 20 Amp 20A - #6-32, zinc plated philslot UL rated 94VO polyamide 9 in.-lbs. max. straight lead, male or female disconnects, pigtail Number ofAB C Circuits in.(mm) in.(mm) in. (mm) 52-257-002 2 1.71(43.4) 1.31(33.3) 1.02(25.9) 52-257-003 3 2.15(54.6) 1.75(44.5) 1.46(37.1) 52-257-004 4 2.59(65.8) 2.19(55.6) 1.90(48.3) 52-257-005 5 3.02(76.7) 2.62(66.5) 2.32(58.9) 52-257-006 6 3.46(87.9) 3.06(77.7) 2.77(70.4) Dimensions in inches (mm) API TECHNOLOGIES * 8061 Avonia Rd. * Fairview, PA 16415 * Ph: 814-474-1571 * Fax: 814-474-3110 * eis.apitech.com API TECHNOLOGIES' SPECTRUM CONTROL GmbH * Hansastrasse 6 * 91126 Schwabach, Germany * Phone: (49)-9122-795-0 * Fax: (49)-9122-795-58 FA21 Custom Filtered Arrays API Technologies' Spectrum Control brand will custom design a filter plate or terminal block that meets your size, material and filtering requirements. We have engineered a variety of capacitive only filter elements that provide excellent RF isolation from 5 MHz to 1 GHz and beyond. In addition, we are capable of providing stringent testing and analysis of our filter plate or terminal block assemblies to MIL-F-15733 and MIL-F-28861. In addition to our standard and custom filter plates and terminal blocks, we offer a number of value-added features designed to complement your manufacturing operation. Our marketing and engineering staff will evaluate your design or manufacturing parameters and develop a filter solution which provides increased filtering performance economically. API Capabilities Custom assemblies with varying cable lengths and terminations Integrate a filter solution with other components to ensure a completely functional device Perform EMC evaluations on your equipment, recommending proper placement of EMI/RFI filtering components Custom high reliability assemblies Filtered Headers Replace the unfiltered connector on your PC board with API's low cost filtered header. This innovative new product allows you to meet EMC emissions and susceptibility standards with minimal or no board change. Flat Conductor Cables Flat conductor cables are often selected as an effective method of interconnection. API can save you time and money by installing conductor cables to your filter plates. Flat conductor cables are available in varying lengths, conductor counts and in several termination configurations. Lead Stabilizer API Technologies' Spectrum Control brand has developed a filter plate lead stabilizer bar to protect leads during installation and ensure proper alignment to PCB. Easy Mate Patent pending Bolt-in Coining process patented Lead stabilizer position can be adjustable API TECHNOLOGIES * 8061 Avonia Rd. * Fairview, PA 16415 * Ph: 814-474-1571 * Fax: 814-474-3110 * eis.apitech.com API TECHNOLOGIES' SPECTRUM CONTROL GmbH * Hansastrasse 6 * 91126 Schwabach, Germany * Phone: (49)-9122-795-0 * Fax: (49)-9122-795-58 FA24 Custom Filtered Terminal Blocks Terminal Block Design Inquiry Form API Technologies' Spectrum Control brand can incorporate EMI filters into a variety of terminal block designs. We offer product variations from several terminal block manufacturers. In addition to developing a filtering solution, we will add custom wiring and terminations to meet your requirements. API offers: Unique package integration for customer specific needs Wide range of designs from numerous terminal block manufacturers Custom assemblies with varying cable lengths and terminations Terminal Block Design Inquiry Form General Information Customer: Location: Address: City: State: Contact: Title: Phone: Fax: Zip: Project Information Project name: Annual usage: Intended application: Quote quantity: Function of circuit filter is used in: Target cost: Target price: Detailed Sketch and Comments Area API TECHNOLOGIES * 8061 Avonia Rd. * Fairview, PA 16415 * Ph: 814-474-1571 * Fax: 814-474-3110 * eis.apitech.com API TECHNOLOGIES' SPECTRUM CONTROL GmbH * Hansastrasse 6 * 91126 Schwabach, Germany * Phone: (49)-9122-795-0 * Fax: (49)-9122-795-58 FA25