FENWALUDIELECTRONICS NTC / PTC Thermistors NTC THERMISTORS CHIP SERIES: Uncoatep or Epoxy Coatep 15 FIGURE 1 FEATURES EPOXY COATED CHIP _ * Rapid response time 100 MAX Leads available insulated and y uninsulated ~ * Thermistor available epoxy coated FIGURE 2 or uncoated UNCOATED CHIP exo MAX A Oe + .020 = Rated to 125 C "D.C. 0.75 mW/*? C minimum * TC. 15 sec. maximum All illustration dimensions are in inches. CHIP SERIES STANDARD NTC Thermistors are offered in a broad range of custom resistance values. Design engineers are offered a wide variety of applications usage in areas, such as: communications, medical, computer and fire detection and instrumentation test equipment; automotive and aerospace electronics and in other electric and electronic design devices. LEADS * Uninsulated leads are .008" dia., tinned copper for 1000 Ohms or less and tinned copper alloy for > 1000 Ohms. * Also available with insulated leads .010" dia., nickel wire teflon insulated | 1/2 long and furnished with 1/4" stripped ends or 0.016" and 0.020" tin-plated copper leads. 100,000 CHIP SERIES ELECTRICAL CHARACTERISTICS *10% Tolerance @ 25 C. Resis. at RT Uncoated Epoxy Coated 25C Curve Part Number Part Number OHMS Figure 2 Figure! 100 17 195-101CAG-A01 197-101CAG-AO! 300 17 195-301CAG-A01 197-301CAG-A0! 195-S02LAGA01 195-5030A 195-104QAG-A01 LAG-AQI 197-502LAG-AO! 197-5030AG-A0I 197-1040QAG-A01 * Also offered in tighter tolerances. ** Diameter of 3,000 ohm part is .120" max. FENWALUDIELECTRONICS NTC / PTC Thermistors 450 Fortune Boulevard, Milford, Massachusetts 01757 USA Telephone: (508) 478-6000 * FAX (508) 473-6035