FF 01821 Outdoor Filter Fan 14 cfm Quick and easy filter change Lockable outer door Impact resistant This filter fan can be used in outdoor enclosures where warm air has to be dissipated. To clean and exchange the filter mat, it is only necessary to open the lockable door of the outdoor hood eliminating the need to allow interior access to the enclosure. A protection type of IP55 is achieved due to the special design of the hood and the use of fine filter mats. The plastic used for the hood of this filter fan is highly weather and UV light resistant. Ventilating Weather and UV resistant Outdoor Filter Fan 6.5" (165 mm) | 8.8" (224 mm) 4.9" (125 mm) 2.4" (62 mm) 2.6" (65 mm) Technical Data Axial fan, ball bearing service life min. 50,000h at 77F (25C) and 65% RH aluminum fan body, plastic rotor 5.6" (142 +0.2 0.7" (18 mm) mm) Connection 2 wires w/ cage clamps, AWG 14 (2.5mm), length 4" (100mm) Filter fan and exhaust filter housing high impact ASA plastic, light grey burning behavior according to UL 94H-B; high resistance to weather and UV light 7.3" (185 +0.2mm) Mounting frame with double-sided industrial adhesive for mounting to the outside of enclosure; certain operating circumstances may make the additional use of screws necessary; cut-out template included View from rear Outdoor Exhaust Filter Filter media rating F5 acc. to DIN EN 779, filtering degree 98% Filter material synthetic fiber with progressive construction, temperature resistant to 212F, self-extinguishing class F1; 5.4" (137 mm) moisture resistant to 100% RH 5.4" (137 mm) Drilling template for mounting frame Operating / Storage temperature +14 to +158F (-10 to +70C) / -40 to +158F (-40 to +70C) Protection class I (grounded) Protection type IP55 Note: EMC version and other voltages are available upon request O0.12" (3 mm) The hood is attached permanently to the enclosure from the inside using provided screws. Filter mats can be easily changed from outside the enclosure through the lockable door in the hood. FF 01821 Outdoor Filter Fan 1) Part No. Operating voltage Air volume, free blowing Power consumption Average noise level (DIN EN ISO 4871) Mounting depth Enclosure cut-out Weight (approx.) Approvals 01821.0-00 01821.0-02 230VAC, 50Hz1) 120VAC, 60Hz 12 cfm (20m/h) 14 cfm (23m/h) 15W 15W 40dB (A) 40dB (A) 2.4" (62mm) 2.4" (62mm) 4.9 x 4.9" 4.9 x 4.9" 2.6 lbs. (1.2kg) 2.6 lbs. (1.2kg) UL File No. E234324 UL File No. E234324 air volume increases by 15% when operating 230VAC filter fans at 60Hz Part No. 11821.0-00 Mounting depth 0.6" (16mm) Enclosure cut-out 4.9 x 4.9" Weight (approx.) 1.6 lbs. (0.6kg) Filter mat F5 acc. to DIN EN 779, filtering degree 98% Protection type IP55 FFM 086 Filter Mats Filter mat F5 (1 packing unit = 3 pcs.) 4.6 x 4.6" (118 x 118mm) Part No. 08604.0-00 Specifications are subject to change without notice. Suitability of this product for its intended use and any associated risks must be determined by the end customer/ buyer in its final application. STEGO, Inc. * 1395 South Marietta Parkway * Building 800 * Marietta, GA 30067 * Tel: (770) 984-0858 * Fax: (770) 984-0615 Toll free: 1-888-783-4611 (US & Canada only) * www.stegousa.com FF01821/2-11/US EF 11821 Exhaust Filter